Q14 Among NH3, H2O And HF, Which Would You Expect To Have ...

Home >> NCERT Solution >> Class 11 >> Chemistry >> Hydrogen >> among nh3 h2o and hf which would you expect to h... Class 11 Chemistry - Chapter Hydrogen NCERT Solutions | Among NH3, H2O and HF, which would you e Welcome to the NCERT Solutions for Class 11th Chemistry - Chapter Hydrogen. This page offers a step-by-step solution to the specific question from Excercise ".$ex_no." , Question 14: among nh3 h2o and hf which would you expect to h.... Question 14

Among NH3, H2O and HF, which would you expect to have highest magnitude of hydrogen bonding and why?

Answer

The extent of hydrogen bonding depends upon electronegativity and the number of hydrogen atoms available for bonding. Among nitrogen, fluorine, and oxygen, the increasing order of their electronegativities are N < O < F.

Hence, the expected order of the extent of hydrogen bonding is HF > H2O > NH3.

But, the actual order is H2O > HF > NH3.

Although fluorine is more electronegative than oxygen, the extent of hydrogen bonding is higher in water. There is a shortage of hydrogens in HF, whereas there are exactly the right numbers of hydrogens in water. As a result, only straight chain bonding takes place. On the other hand, oxygen forms a huge ring-like structure through its high ability of hydrogen bonding.

In case of ammonia, the extent of hydrogen bonding is limited because nitrogen has only one lone pair. Therefore, it cannot satisfy all hydrogens.

More Questions From Class 11 Chemistry - Chapter Hydrogen

  • Q:-

    Justify the position of hydrogen in the periodic table on the basis of its electronic configuration.

  • Q:-

    Compare the structures of H2O and H2O2.

  • Q:-

    Write chemical reactions to show the amphoteric nature of water.

  • Q:-

    Discuss the principle and method of softening of hard water by synthetic ion-exchange resins.

  • Q:-

    Arrange the following

    (i) CaH2, BeH2 and TiH2 in order of increasing electrical conductance.

    (ii) LiH, NaH and CsH in order of increasing ionic character.

    (iii) H-H, D-D and F-F in order of increasing bond dissociation enthalpy.

    (iv) NaH, MgH2 and H2O in order of increasing reducing property.

  • Q:-

    What do you understand by the term “non-stoichiometric hydrides”? Do you expect this type of the hydrides to be formed by alkali metals? Justify your answer.

  • Q:-

    What is meant by 'demineralised' water and how can it be obtained?

  • Q:-

    What causes the temporary and permanent hardness of water?

  • Q:-

    How does H2O2 behave as a bleaching agent?

  • Q:-

    Why does hydrogen occur in a diatomic form rather than in a monoatomic form under normal conditions?

Popular Questions of Class 11 Chemistry

  • Q:-

    How do you account for the formation of ethane during chlorination of methane?

  • Q:-

    What are hybridisation states of each carbon atom in the following compounds ?

    (i) CH2=C=O,

    (ii) CH3CH=CH2,

    (iii) (CH3)2CO,

    (iv) CH2=CHCN,

    (v) C6H6

  • Q:-

    What will be the minimum pressure required to compress 500 dm3 of air at 1 bar to 200 dm3 at 30°C?

  • Q:-

    What are the common physical and chemical features of alkali metals?

  • Q:-

    Calculate the molecular mass of the following: (i) H2O (ii) CO2 (iii) CH4

  • Q:-

    Assign oxidation number to the underlined elements in each of the following species:

    (a) NaH2PO4

    (b) NaHSO4

    (c) H4P2O7

    (d) K2MnO4

    (e) CaO2

    (f) NaBH4

    (g) H2S2O7

    (h) KAl(SO4)2.12 H2O

  • Q:-

    What is the basic theme of organisation in the periodic table?

  • Q:-

    Explain the formation of a chemical bond.

  • Q:-

    Choose the correct answer. A thermodynamic state function is a quantity (i) used to determine heat changes (ii) whose value is independent of path (iii) used to determine pressure volume work (iv) whose value depends on temperature only.

  • Q:-

    A liquid is in equilibrium with its vapour in a sealed container at a fixed temperature. The volume of the container is suddenly increased. a) What is the initial effect of the change on vapour pressure? b) How do rates of evaporation and condensation change initially? c) What happens when equilibrium is restored finally and what will be the final vapour pressure?

Recently Viewed Questions of Class 11 Chemistry

  • Q:-

    A sample of drinking water was found to be severely contaminated with chloroform, CHCl3, supposed to be carcinogenic in nature. The level of contamination was 15 ppm (by mass).

    (i) Express this in percent by mass.

    (ii) Determine the molality of chloroform in the water sample.

  • Q:-

    Calculate the standard enthalpy of formation of CH3OH(l) from the following data:

    CH3OH (l) + 3/2 O2(g) → CO2(g) + 2H2O(l) ; ΔrH0 = –726 kJ mol–1

    C(g) + O2(g) → CO2(g) ; ΔcH0 = –393 kJ mol–1

    H2(g) + 1/2 O2(g) → H2O(l) ; ΔfH0 = –286 kJ mol–1.

  • Q:-

    (i) The energy associated with the first orbit in the hydrogen atom is –2.18 × 10–18 J atom–1. What is the energy associated with the fifth orbit?

    (ii) Calculate the radius of Bohr’s fifth orbit for hydrogen atom.

  • Q:-

    The value of Kc for the reaction

    3O2 (g) 2O3 (g) is 2.0 ×10–50 at 25°C.

    If the equilibrium concentration of O2 in air at 25°C is 1.6 ×10–2, what is the concentration of O3?

  • Q:-

    Starting with sodium chloride how would you proceed to prepare

    (i) sodium metal (ii) sodium hydroxide (iii) sodium peroxide (iv) sodium carbonate?

  • Q:-

    Considering x-axis as the internuclear axis which out of the following will not form a sigma bond and why?

    (a) 1s and 1s

    (b) 1s and 2px

    (c) 2py and 2py

    (d) 1s and 2s.

  • Q:-

    What are the common physical and chemical features of alkali metals?

  • Q:-

    Bromine monochloride, BrCl decomposes into bromine and chlorine and reaches the equilibrium:

    2BrCl (g) Br2 (g) + Cl2 (g) for which Kc= 32 at 500 K.

    If initially pure BrCl is present at a concentration of 3.3 × 10–3 mol L–1, what is its molar concentration in the mixture at equilibrium?

  • Q:-

    What is smog? How is classical smog different from photochemical smog?

  • Q:-

    Explain the physical significance of Van der Waals parameters.

Write a Comment:

  • All Chapters Of Class 11 Chemistry
    • Some Basic Concepts of Chemistry
    • Structure of Atom
    • Classification of Elements and Periodicity in Properties
    • Chemical Bonding and Molecular Structure
    • States of Matter
    • Thermodynamics
    • Equilibrium
    • Redox Reactions
    • Hydrogen
    • The s Block Elements
    • The p Block Elements
    • Organic Chemistry Some Basic Principles and Techniques
    • Hydrocarbons
    • Environmental Chemistry
  • All Subjects Of Class 11
    • Class 11th History
    • Class 11th Business Studies
    • Class 11th Hindi
    • Class 11th English
    • Class 11th Economics
    • Class 11th Accountancy
    • Class 11th Chemistry
    • Class 11th Physics
    • Class 11th Biology
    • Class 11th Mathematics

NCERT Solutions

  • NCERT Solutions for Class 12
  • NCERT Solutions for Class 11
  • NCERT Solutions for Class 10
  • NCERT Solutions for Class 9
  • NCERT Solutions for Class 8
  • NCERT Solutions for Class 7
  • NCERT Solutions for Class 6

Quick Links

  • NCERT Sample Papers
  • NCERT Books
  • CBSE Syllabus
  • Scholarship for Students
  • Exam
  • NCERT Exemplar
  • CBSE Topper Answer Sheets

Resources

  • CBSE Board Paper
  • Courses
  • Multiplication Tables 2 to 30
  • Vedic Math

Support

  • About Us
  • Contact Us
  • Latest Blog
  • © 2024 SaralStudy
  • Privacy Policy
  • Disclaimer

Từ khóa » Hf H2o Nh3