Quick Guide To The G02 CNC G Code [Tips And Tricks]

Trang chủ » G02 Cnc » Quick Guide To The G02 CNC G Code [Tips And Tricks]

Có thể bạn quan tâm

Table of Contents

Toggle
  • What does a G02 code do?
  • Ready to master CNC programming?
  • What is circular interpolation?
  • G02 [clockwise circular interpolation] vs G03 [counterclockwise circular interpolation]
  • G02 vs G2
  • When to use a G02 code?
  • Other codes used with G02
  • Format for using a G02 code
  • How to turn off the G02 code
  • What to think about when using a G02 code?
    • Units
    • Absolute vs incremental mode
    • Start and stop locations
  • CNC codes that are similar to G02
  • Ready to master CNC programming?

What does a G02 code do?

G02 sets the CNC movement mode to clockwise circular movement, otherwise known as circular interpolation.

G02 is used to move the CNC around along a specified radius set with the R code in a clockwise direction and at a feed rate set with the F code.

illustration showing the radius in a circular interpolation move

G02 is a modal command which means it will stay on until switched to another code in the same movement group of codes such as G00 – Rapid travel, G01 – Linear interpolation or G03 – Counterclockwise circular interpolation.

Từ khóa » G02 Cnc