Ryobi 190cc 4 Stroke RPW3200Y Questions | .au

1. Pressure Washers
2. Best Petrol Pressure Washers
3. Ryobi 190cc 4 Stroke RPW3200YRyobi 190cc 4 Stroke RPW3200Y

Ryobi 190cc 4 Stroke RPW3200Y Questions & Answers VerifiedMPN: RPW3200Y Ask a questionWrite a review

Compare best Petrol Pressure Washers

Aussie Pumps Slow Speed Blaster Scud 5.0Renegade R3000-9 5.0Briggs & Stratton Sprint 3200 4.0Mastercraft SPW3000V 5.0Dewalt DXPW3400SC 5.0See more Keri C.4yVote (1)More

What is the pump made from? Is it a commercial grade pump?

shootingstar  3yVoteMore

Cardboard

Reply App6yVote (1)More

Here in details you write maximum water flow 5.7 liter per minute I guess it's a typing mistake

Reply Harrymichelle7yVoteMore

I've just finished cleaning the deck and it did a good job however when cleaning the machine and packing it up i noticed the hose has been melted in a few places , How Have I managed to do this ? I did not notice a warning sticker to tell me to keep it clear of any parts of the machine .

Stratton C.  7yVoteMore

Bro are you stupid, it’s an engine it’s going to get hot. Common sense will help you

Harrymichelle  7yVote (2)More

Thanks Bro , for your very helpful advice , Yes I must be stupid . Common sense was a tad damp that day .

Reply Kimbo7yVoteMore

Can you put deck cleaning solution in the soap tank?

Reply Nudge7yVoteMore

Hi there

Can u buy a hose extension to work at heights and unit can stay on ground level? Will it affect the unit if so.

Cheers

Reply Jan7yVoteMore

I purchased this one yesterday..set it up fine until I attached the 5 in 1 nozzle. Water pressure fills the wand but nothing comes out of the nozzle. Any ideas?

bmorey  7yVoteMore

Nozzle selector not lined up with arrow?

Reply Kenneth O7yVoteMore

Where can I buy the new hose?

bmorey  7yVoteMore

external link 

Reply Macy8yVoteMore

I've only just bought this unit. I went to use the soap spray today to clean my deck. When I put the nozzle on the soap spray setting and turned it on, there was very little pressure. So much so that I could put my hand in front of the spray. Hence it didn't clean my deck very well. Is it supposed to come out at any discernible pressure???

bmorey  8yVoteMore

This is correct behaviour. The soap setting is very low pressure and only for applying soap, not for cleaning. The cleaning comes in when you wash off the soap and grime on the high pressure setting.

Reply Al Uren9yVoteMore

Anyone having an issue with the pressure as it starts well then after a couple of minutes it drops back?

Simo  9yVoteMore

Sorry I haven't experienced this issue. All i can suggest is to make sure it's primed fully and the water source is unrestricted and clean. Also, Are you turning the choke off after first starting?

Reply

Get an answer from our members and Ryobi representatives

Ask your questionSubmit your questionPreviousAussie Pumps Slow Speed Blaster Scud5.0 Renegade R3000-95.0 Briggs & Stratton Sprint 32004.0 Mastercraft SPW3000V5.0 Dewalt DXPW3400SC5.0 Briggs & Stratton Sprint 28005.0 Stihl RB 8005.0 Dewalt Petrol Pressure Washer DXPW44155.0 ToolPro Petrol Pressure Washer 6.5HP5.0 Jet-USA 5000 PSI TX870 Gen II4.0 NextCompare best Petrol Pressure Washers

Extra Information

Compare best Petrol Pressure Washers

Aussie Pumps Slow Speed Blaster Scud 5.0Renegade R3000-9 5.0Briggs & Stratton Sprint 3200 4.0Mastercraft SPW3000V 5.0Dewalt DXPW3400SC 5.0See more

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.