S4100C Combustible Gas Detector - MSA Safety

Skip to main content Home / Fixed Gas & Flame Detection / Gas Detectors / S4100C Combustible Gas Detector S4100C Combustible Gas Detector S4100C Combustible Gas Detector The S4100C Intelligent Sensor is a self-contained microprocessor-based transmitter with integral three-digit readout. It is designed to measure and display concentrations of combustible gases in the 0-100% LEL range, but will continue to display concentrations up to 120% LEL. The sensing element may be incorporated in the transmitter housing or remotely mounted at distances up to 620 meters. The S4100C records the number of successful calibrations, computes the sensor output in mV during calibration and stores in non-volatile memory.

This product has been replaced by the S5000 Gas Monitor. See its many advantages here: msasafety.com/s5000.

Show Less Read More Ask a Question Discontinued × Product discontinued. View Part Numbers S4100C Combustible Gas Detector Discontinued × Product discontinued. Highlights Videos Specifications Approvals Literature Highlights

• EExe (increased safety) approval provides high level of water ingress protection for harsh environments
• 10-35 VDC operation allows longer cable runs and lower cost installation
• Selectable calibration gas level with non-standard gas concentrations possible
• Three (3) digit LED displays up to 120% LEL and alarm status
• Fully adjustable alarm levels with open collector outputs lower wiring costs and allows for flexible operation
• Industry standard 4-20 mA output for remote alarm and fault indication
• RS-485 Dual Modbus Serial Output, in addition to 4-20mA, provides measurement, setup and status of up to 247 nodes

Videos Show More Videos Show Less Videos Specifications Gas Name Acetone Acetaldehyde Acetic Acid Acetronitrile Acetylene Acrylonitrile Amylamine Benzene Butadiene Amyl Acetate Butane Butene Butyl Acetate Dioxane Decane Cyclohexane Butyl Alcohol Dimethylamine Diethyl Ether Dodecane Ethane Ethyl Alcohol Ethanol Ethylamine Ethylbenzene Ethylene Ethyl Ether Ethylene Oxide Formaldehyde Gasoline Heptane Isopropyl Alcohol Hexane Isoprene Hydrogen Isopropyl Ether Isopropylamine Jet Fuel Methyl Alcohol Methane Methyl Ethyl Ketone Methyl Methacrylate Naptha Octane Propyl Acetate Pentane Propane Propyl Alcohol Propylene Oxide Propylamine Propylbenzene Styrene Propylene Tetrahydrofuran Tetrahydrofurfuryl Alcohol Vinyl Chloride Trimethylamine Triethylamine Xylene Methanol Vinyl Ethyl Ether Vinyl Acetate Markets General Industry Oil & Gas Utilities Approvals Approvals subject to change without notice and may differ based on configuration, part number and/or country. Contact Customer Service or check approval label on product for specific approval information.

Certifications

• ATEX
• CE
• BV

Literature

View literature available in English

• Frequently Bought Together

MC600 Multi-Channel Controller The MC600 is a microprocessor-based multi-channel controller that provides six channels of continuous gas detection. It can be configured as either a local gas detection system, or it can be networked to provide a large plant-wide distributed safety system. It is compatible with our hydrocarbon sensors, H2S sensors, as well as our S4000CH, S4100C, S4000TH, S4100T, IR400, IR5500, IR700, TS4000H, Observer, and Surveyor gas detectors. View Details Catalytic Bead Sensors The General Monitors catalytic bead gas sensors are well known for their sensitivity, reliability and longevity and make them the first choice for most users of the catalytic oxidation gas detection principle. Every component is manufactured in-house to ensure optimum performance. Careful matching of the active and reference elements ("beads") result in a sensor that has negligible zero drift with respect to changes in humidity, pressure, and temperature. View Details Catalytic Bead Accessories General Monitors offers a wide variety of accessories for our catalytic bead gas sensors. View Details Your Viewing History S4100C Combustible Gas Detector The S4100C Intelligent Sensor is a self-contained microprocessor-based transmitter with integral three-digit readout. It is designed to measure and display concentrations of combustible gases in the 0-100% LEL range, but will continue to display concentrations up to 120% LEL. The sensing element may be incorporated in the transmitter housing or remotely mounted at distances up to 620 meters. The S4100C records the number of successful calibrations, computes the sensor output in mV during calibration and stores in non-volatile memory. This product has been replaced by the S5000 Gas Monitor. See its many advantages here: msasafety.com/s5000. View Details × Close Part Number(s) S4100C Combustible Gas Detector Contact customer service for ordering information Contact customer service for ordering information /EA Details Where to Buy Details × Close × Close

Ask a Question

× Thank you! An MSA representative will be in touch soon. Un représentant de MSA vous contactera bientôt. Ein MSA-Ansprechpartner wird sich in Kürze bei Ihnen melden. ×

Where to Buy

MSA's network of distributors can help find the right product for you.

FIND US

Stay Informed

Sign up to get the latest industry resources, product information, monthly newsletter, and related topics.

SUBSCRIBE