Scheppach HM80L Translation From Original Manual Page 11

× Bookmark added × Added to my manuals

1. Manuals
2. Brands
3. Scheppach Manuals
4. Saw
5. HM80L
6. Translation from original manual

Scheppach HM80L Translation From Original Manual page 11 Undercut mitre saw 3901105915; 3901105941; 3901105942 Hide thumbs Also See for HM80L:

• Instruction manual (336 pages)
,
• Translation of original instruction manual (256 pages)
,
• Translation from original manual (188 pages)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 Table Of Contents 105

• page of 105 Go / 105
• Contents
• Table of Contents
• Troubleshooting
• Bookmarks

Table of Contents

Advertisement

Available languages

• EN
• FR
• DE
• IT
• PL
• SE
• CZ
• DK
• FI
• SK
• More

Available languages

• ENGLISH, page 11
• FRANÇAIS, page 18
• DEUTSCH, seite 3
• ITALIANO, pagina 26
• POLSKI, strona 81
• SVENSKA, sida 94
• ČEŠTINA, strana 47
• DANSK, side 40
• SUOMI, sivu 33
• SLOVENČINA, strana 75
• NORSK, side 87
• LIETUVIŲ, puslapis 71
• LATVIEŠU, 61. lappuse
• EESTI, lehekülg 54

Enlarged version MANUFACTURER: scheppach Fabrikation von Holzbearbeitungsmaschine GmbH Günzburger Straße 69 D-89335 Ichenhausen DEAR CUSTOMER, we wish you a pleasant and successful working experi- ence with your new machine. According to the applicable product liability law the man- ufacturer of this device is not liable for damages which arise on or in connection with this device in case of: • improper handling, • non-compliance with the instructions for use, • repairs by third party, non authorized skilled workers, • installation and replacement of non-original spare parts, • improper use, • failures of the electrical system due to the non-com- pliance with the electrical specifications and the VDE 0100, DIN 57113 / VDE 0113 regulations Recommendations: Read the entire text of the operating instructions prior to the assembly and operation of the device. These operating instructions are intended to make it eas- ier for you to get familiar with your device and utilize its intended possibilities of use. The operating instructions contain important notes on how to work safely, properly and economically with your machine and how to avoid dangers, save repair costs, re- duce downtime, and increase the reliability and working life of the machine. In addition to the safety regulations contained herein, you must in any case comply with the applicable regulations of your country with respect to the operation of the ma- chine. Put the operating instructions in a clear plastic folder to protect them from dirt and humidity, and store them near the machine. The instructions must be read and carefully observed by each operator prior to starting the work. Only persons who have been trained in the use of the machine and have been informed on the related dangers and risks are allowed to use the machine. The required minimum age must be met. In addition to the safety notes contained in the present operating instructions and the special regulations of your country, the generally recognized technical rules for the operation of wood working machines must be observed. LEGEND, FIG. 1 1 Grip 2 Start switch 3 Base 4 Joint for casing / base 5 Rotary table 6 Motor 7 Saw blade 8 Table insert 9 Ratchet lever 10 Saw blade guard, fixed 11 Saw blade guard, moveable 12 Chip bag 13 Clamping jaw HM80L Scope of delivery tooling for sawblade change SW 6 Technical Data Dimensions L x W x H mm ø revolving table mm Table height mm 210/30/2,6/1,6 WZ 24 Saw blade ø mm Speed 1/min Cutting rate m/s Swivel range Tool cutting edge inclination Doublemitering 45º x 45º 45°, 30°, 22,5°, 15°, 0°, Adjustments Weight kg Cut data for rip cutting 90°/90°/ 90°/45° 45°/90° 45°/45° Drive Motor V/Hz Input W Subject to technical modifications! The height of the workpiece must be at least 3 mm. Make sure that the workpiece is always secured with the clam- ping device. Information on noise The noise levels of the machine during operation are as follows: L : 99.6dB(A) K=3dB(A) pA L : 112.6dB(A) K=3dB(A) wA Vibration: 4.51m/s K=1.5m/s 2 Warning: Noise can seriously damage your health. If the engine noise exceeds 85 dB (A), please wear appropriate hearing protection. If the electrical connection is faulty, the current may drop when the machine starts. This may affect other machines (e.g. flashing lights). If the elec- tric output corresponds to Zmax <0.27, such interference should not occur. (If it does, notify your dealer). • The vibration emission value given below has been measured by a standardized test, and can be used for comparing one power tool to another; • The vibration emission value given below may also be used for a first assessment of exposure. Warning: • The vibration emission value may vary during actual use of the power tool from the specified value, depend- ing on the manner in which the power tool is used; • Try to keep exposure to vibration to a minimum. Ex- amples of ways to reduce vibration levels are wearing Undercut Mitre Saw dust collector bag workpiece holder 3 supports 2 carbon brushes Operating instructions 690 x 550 x 440 385 x 150 55 5000 55 2 x 45° 45° left 15°, 22,5°, 30°, 45° 7,7 120 x 60 mm 80 x 60 mm 120 x 35 mm 80 x 35 mm 220-240 ~ 50 S6 25% 1500W 2 11 Table of Contents Previous Page Next Page

• 1
• ...
• 8
• 9
• 10
• 11
• 12
• 13
• 14
• 15

Show Quick Links

• Quick Links:
• Allgemeine Hinweise
• Montage
• General Safety Notes
• Proper Use
• Maintenance
• Troubleshooting

Hide quick links:

Permanently Temporary Cancel

Advertisement

Table of Contents

Need help?

Do you have a question about the HM80L and is the answer not in the manual?

Ask a question Go to Questions and Answers

Related Manuals for Scheppach HM80L

• Saw Scheppach HM80L Instruction Manual Cross-cut mitre saw (336 pages)
• Saw Scheppach HM80L Translation Of Original Instruction Manual Undercut mitre saw (256 pages)
• Saw Scheppach HM80L Translation Of Original Instruction Manual Undercut (228 pages)
• Saw Scheppach HM80L Translation From Original Manual Undercut mitre saw (188 pages)
• Saw Scheppach HM80L Translation From Original Manual Undercut undercut mitre saw (85 pages)
• Saw Scheppach HM80L Translation From Original Manual Undercut mitre saw (60 pages)
• Saw Scheppach HM80L Translation Of Original Instruction Manual Undercut mitre saw (40 pages)
• Saw Scheppach HM80Lxu Instruction Manual Slide compound mitre saw (81 pages)

• Saw Scheppach HM80Lxu Translation From The Original Instruction Manual Sliding cross cut mitre saw (260 pages)
• Saw Scheppach 5901201901 Translation From The Original Instruction Manual Sliding cross cut mitre saw (200 pages)
• Saw Scheppach HM80MP Translation From The Original Instruction Manual Sliding cross cut mitre saw (33 pages)
• Saw Scheppach HM80MP Translation From The Original Instruction Manual Sliding cross cut mitre saw (232 pages)
• Saw Scheppach HM80DB Translation From The Original Instruction Manual (268 pages)
• Saw Scheppach HM81 Instruction Manual Cross-cut mitre saw (56 pages)
• Saw Scheppach HM216 Original Operating Instruction Sliding cross-cut mitre saw (124 pages)
• Saw Scheppach HM216 Translation Of The Original Operating Instructions (116 pages)

Related Products for Scheppach HM80L

• Scheppach HM80Lxu
• Scheppach HM80MP
• Scheppach HM80DB
• Scheppach HM81
• Scheppach HM81LXU
• Scheppach HM100lu
• Scheppach HM140L
• Scheppach HM90MP

• Scheppach HM110T
• Scheppach HM135B
• Scheppach HM90LXU
• Scheppach HM110MP
• Scheppach HM305SL
• Scheppach HM2000 SE
• Scheppach HM185
• Scheppach HM210L

Table of Contents

Print

Print page 11 Print document (105 pages)

Rename the bookmark

Cancel

Delete bookmark?

Cancel Delete

Delete from my manuals?

Cancel Delete

Login

Sign In OR Sign in with Facebook Sign in with Google Don't have an account? Sign up! Restore password

Upload manual

Upload from disk Upload from URL Thank you for your help!