Selecting A Cuff Size | Target:BP

Trang chủ » Bp X 32 » Selecting A Cuff Size | Target:BP

Có thể bạn quan tâm

Devices with an upper arm cuff provide the most accurate blood pressure readings. Wrist cuffs should not be used unless the patient cannot use an upper arm cuff due to arm size being too large to fit a cuff or for medical reasons. Finger devices should never be used. Clinical guidelines do not recommend the use of finger devices because they are less accurate than upper arm devices. Similarly, cuffless BP devices such as smartwatches are not recommended for the diagnosis or management of high BP until further studies demonstrate greater precision and reliability.

Measuring a person's arm.

Measure Your Patient’s Arm

Wrap a tape measure around the patient’s bicep, at mid-arm to determine the arm circumference (typically measured in cm).

Select a Cuff Size Based on Arm Circumference

The ideal cuff bladder length is ≥ 80 percent of the patient’s arm circumference. The ideal cuff bladder width is ≥ 37 percent of the patient’s arm circumference.

Arm Circumference Recommended Cuff Size (width x length in cm)
cm in
22 – 26 8.7 – 10.2 12 x 22 (small adult)*
27 – 34 10.6 – 13.4 16 x 30 (adult)*
35 – 44 13.8 – 17.3 16 x 36 (large adult)*
45 – 52 17.7 – 20.5 16 x 42 (extra-large adult)
*Many devices are sold with variable size cuffs that will fit sizes ranging from small to large. Extra-large cuffs might be sold separately. Note, BP device manufacturers do not consistently size cuffs as described above, so check device specifications for the range of arm circumferences covered. Example: If a patient has a 40 cm arm circumference, 80% of the arm circumference is 0.8 x 40 cm = 32 cm. The minimum cuff length that can be used for this person is 32 cm, which is typically a large adult cuff, but this might vary across manufacturers.

Manage Devices

Once you have purchased the correct devices, get organized with our device inventory and management tools.

Up Next: Training Patients

Từ khóa » Bp X 32