Shimano Deore XT FH-M8000 135mm Rear Hub Dimensions

Trang chủ » Fh-m8000 Hub » Shimano Deore XT FH-M8000 135mm Rear Hub Dimensions

Có thể bạn quan tâm

part of kstoerz.com
  • Log in
  • Register
  • Calculator
  • Bench
  • Rims
  • Hubs
  • Manufacturers
  • Builds
  • Contribute
  • How to Measure
  • Tech Info
  • About
Shimano Deore XT FH-M8000 135mm Rear hub

Add this hub to your bench
Hub Data
Manufacturer Shimano
Model Deore XT FH-M8000
Descriptor
Position Rear
Axle Type 10mm
OLN 135 mm
Spoke Interface Type J-Bend
Brake Compatibility disc, Centerlock
Drive Interface Shimano 8/9/10/DynaSys (34.95mm)
Internal Gearing none
Dynamo Type none
Spoke Hole Diameter 2.6 mm
Left Flange Diameter 44 mm
Right Flange Diameter 45 mm
Left Flange Offset 34.1 mm
Right Flange Offset 20.3 mm
Mid-Flange Offset -6.9 mm (to the left)
Weight 331 g
URL
Metadata
Hub ID 472
Record Status Public
Created Apr 12, 2019 3:37pm
hub dimension diagram PLEASE NOTE: Shimano publishes hub dimensions in a relatively confusing manner on bike.shimano.com. They seem to provide the outside-to-outside flange spacing, and an overall offset of the flanges as a whole. Wheelbuilders are interested in the distance from the midpoint between locknut faces to the middle of the flange (not the inside or outside face). When necessary, I convert Shimano's data into useful spoke calculation dimensions with some simple arithmetic, and factor in 3mm thick hub flanges (an approximation). The formula is to divide spacing by two, add or subtract the overall offset, then subtract half of our assumed 3mm flange thickness. Please check the notes to see if the values for this part are derived from Shimano's published data or actual measurements of a hub specimen. -Karl anonymous contrib. Flange data calculated from Shimano's specs assuming 3mm flange thickness. -Karl 5/4/2023 -- Confirmed dimensions and weight on a new 32h specimen during a build. -Karl part image

page generated in 0.001 seconds

© 2009-2026 Karl Stoerzinger

Valid XHTML 1.0 Strict

Từ khóa » Fh-m8000 Hub