Single-port 10GE And 10-port FE/GE (LNW910)

Trang chủ » Cổng Fe Ge » Single-port 10GE And 10-port FE/GE (LNW910)

Có thể bạn quan tâm

Single-port 10GE and 10-port FE/GE (LNW910)

Allowed PTMs for LNW910 packs

The table below lists the PTMs that may be used in the LNW910 circuit pack.

Only the Alcatel-Lucent specified PTM transceivers listed below are compatible with Alcatel-Lucent 1665 DMXtend software. If non-Alcatel-Lucent specified PTM transceivers are installed in Alcatel-Lucent 1665 DMXtend, the system will reject that transceiver, and that port will become inoperable (until approved parts are installed).

The LNW910 circuit pack and most of the supported PTMs are approved for OSP deployments. You must install OSP PTMs that are approved for industrial temperatures to install the LNW910 in OSP environments.

Supported Ethernet PTMs
Table 10-81: Supported Ethernet PTMs for LNW910

Apparatus code

Description

SGEMEC1

SFP, 100 Mb/s and GbE Copper, Fast Ethernet 100 Mbits: Gigabit Ethernet 1.25 Gbits, OSP hardened/Industrial temperature, (−40°C to 85°C)

X10GMC2

XFP, 10GE LAN PHY, I-64.1, 10 km, 10GBASE-LR, 1310 nm, SM, OSP hardened/Industrial temperature, (−40°C to 85°C)

X10GMC4

XFP, 10GE LAN PHY, I-64.2b, 40 km, 10GBASE-ER, 1550 nm, SM, OSP hardened/Industrial temperature, (−40°C to 85°C)

X10GMC5

XFP, 10GE LAN PHY, P1L1-2D2 80 km, 10GBASE-ZR, 1550 nm, SM, extended temperature, (−5°C to 85°C)

GE-1X2XFC-SX-I1

GbE short-reach, Multi-Mode PTM, supports Ethernet and Fibre-Channel traffic, LC-type connectors, OSP hardened/Industrial temperature, (−40°C to 85°C), (GbE/FC/2FC-850).

GE-1X2XFC-LX-I1

GbE long-reach, Single-Mode PTM, supports Ethernet, FICON, and Fibre-Channel traffic, LC-type connectors, OSP hardened/Industrial temperature, (−40°C to 85°C), (GbE/FC/2FC-1310)

100BASE-LX-I1

Optical Fast Ethernet PTM, LC-type connectors , OSP hardened/Industrial temperature, (−40°C to 85°C), (FE-1310SM)

1000BASE-ZX-I1

GbE very long-reach, 1550 nm, Single-Mode PTM, supports Ethernet, LC-type connectors, and is OSP hardened/Industrial temperature, (−40°C to 85°C), (GbE-1550)

Format specification

The Ethernet/SAN interfaces comply with the following formatting standards:

  • Maximum frame size see Packet size in different tagging modes

  • Transparent mode only for VLAN management

  • Ethernet to SONET Mapping, G.7041 (GFP) and G.707 (Virtual Concatenation)

  • GFP-F SONET protection (G.7041)

Performance monitoring

Performance monitoring capabilities are available for the LNW910. For detailed PM parameter thresholds on the interfaces, see Performance monitoring.

September 2013Copyright © 2013 Alcatel-Lucent. All rights reserved.

Từ khóa » Cổng Fe Ge