[SOLVED] Windows 10 100% Disk Usage In Task Manager

X

No file downloaded?

Try again... Step 1 Step2 Step3 Step4

To

install

Driver Easy

We only recommend products we believe in. Products that work. But, just so you know, we may earn commission in doing so.

Home › Knowledge Base › Technical Tips

[SOLVED] Windows 10 100% disk usage in Task Manager

Sophie Luo

Last Updated: 1 month ago 850

If your Windows 10 Task Manager shows 100% disk usage, something is causing your hard drive to over-work. The good news is, it’s usually not a hard problem to fix.

Before you start troubleshooting, check if it’s a temporary system glicth. You can do that by simply restarting the PC and see if the issue persists.

8 fixes for 100% disk usage on Windows 10

Here are a few fixes that have helped other users resolve their Windows 10 100% disk usage problem. You may not need to try them all; just work your way down the list until you find the one that works for you.

1. Disable SuperFetch service
2. Update your device drivers
3. Perform a disk check
4. Reset Virtual Memory
5. Disable Antivirus Software temporarily
6. Fix your StorAHCI.sys driver
7. Check the health of your disk
8. Switch to ChromeOS

Fix 1: Disable SuperFetch

SuperFetch helps to decrease boot time and make must-load programs more efficiently. However, it has been identified as a potential cause of disk performance issues in Windows 8 and later versions of Windows, including Windows 10. Here’s how to stop this service:

1) On your keyboard, press Windows logo key, type command prompt, then select Run as administrator.

2) Click Yes at the User Account Control prompt.

3) The command prompt will once again display. Type in the following command:

net.exe stop superfetch

4) Hit Enter on your keyboard.

5) If the command above isn’t valid, try the following one instead:

net.exe stop sysmain

6) Wait for a few minutes to see if your computer starts performing better. Or check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem!

If the 100% disk usage problem persists, try the next method, below.

Fix 2: Update your device drivers

The 100% disk usage problem in Windows 10 could indicate a driver issue. In other words, it could mean that you’re using a faulty or outdated device drivers.

You can automatically update all your device drivers to the latest correct version with Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. Though Driver Easy is a paid software, it offers a 7-day free trial so you can be sure it’s right for you.

With Driver Easy, updating drivers only takes 2 clicks:

1. Download and install Driver Easy.
2. Run Driver Easy and click Scan Now button. Driver Easy will then scan your computer and detect any outdated or faulty drivers.
3. Click Update All to automatically download and install the correct version of all the drivers that are missing or outdated on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All. You can opt for the 7-day free trial, or you can go Pro now at a discounted price).
4. Check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem!

The Pro version of Driver Easy comes with full technical support. If you need assistance, please contact Driver Easy’s support team at support@drivereasy.com.

If the 100% disk usage problem persists, try the next method, below.

Fix 3: Perform a disk check

1) On your keyboard, press Windows key and X at the same time, then choose Command Prompt (Admin).

2) Click Yes at the User Account Control prompt.

3) The command prompt will once again display. Type in the following command:

chkdsk.exe /f /r

4) Hit Enter on your keyboard, then type Y to confirm that you’d like to perform the disk check the next time you restart your computer. Please make sure you have closed all of your applications first.

IMPORTANT: Disk check will start the next time you boot your PC and it might take some time to complete (could be a day for some). If, when you restart, you don’t have time to wait for the disk check to complete, you can skip it. You’ll need to reschedule it again, as described above, though.

5) Once you’ve completed the disk check, check your computer’s disk usage again: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem!

If the 100% disk usage problem persists, try the next method, below.

Fix 4: Reset Virtual Memory

Virtual memory can be considered an extension of your computer’s physical memory. It’s a combination of RAM and a portion of your hard drive. When the RAM isn’t enough to perform a task, Windows will temporarily store files in virtual memory, then swap them back to RAM when required.

To reset virtual memory: 1) On your keyboard, press Windows key and Pause/ Break key at the same time. Then choose Advanced System Settings on the left panel.

2) Go to the Advanced tab, then click Settings.

3) Go to the Advanced tab again, and choose Change… in the Virtual memory section.

4) Ensure the Automatically manage paging file size for all drives checkbox is NOT ticked.

5) Select your windows drive (the hard drive or partition that has Windows installed on it – usually C:), and enter an Initial size and Maximum size for your virtual memory:

• Initial size – This value varies, depending on your computer. If you’re not sure what value to use, just enter whatever the number is in the Recommended category.
• Maximum size – Don’t set this value too high. It should be about 1.5 times the size of your physical RAM. e.g. A PC with 4 GB (4096 MB) of RAM should have no more than about 6,144 MB virtual memory (4096 MB x 1.5).

Once you’ve entered your virtual memory values, click Set, then click OK to continue.

6) Clear all your computer’s ‘temp’ files. On your keyboard, press Windows key and R at the same time, then in the Run form, type temp and hit Enter. This will invoke Windows Explorer with your Temp folder open, showing you all the temp files on your computer.

7) Select all the files in the Temp folder and delete them.

8) Check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem!

If the 100% disk usage problem persists, try the next method, below.

Fix 5: Disable Antivirus Software temporarily

If you’ve installed antivirus or anti-malware programs such as Norton, Kaspersky, AVG, Avast Behavior Shield or Malwarebytes, you should temporarily turn them off or disable them to see if they’re causing your disk usage problem.

Please see your antivirus software’s documentation to learn how to disable it. You might also find these links useful:

• How to temporarily turn off Norton Antivirus program?
• How to stop AVG temporarily?
• How to disable Avast temporarily?

Note that Microsoft has its own default anti-malware, Windows Defender. It’s automatically enabled even if you also have other antivirus applications installed. Even if you disable your other antivirus programs, Windows Defender is always there for you during that certain time range. So, no need to worry too much about temporarily turning antivirus off.

Once you’ve disabled your antivirus, check your computer’s disk usage again: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve found the problem, and you should contact the vendor of your antivirus software to see if they can provide some help.

If the 100% disk usage problem persists, try the next method, below.

Fix 6: Fix your StorAHCI.sys driver

Note: A million thanks to our warm-hearted reader Javier for the following solution.

The Windows 10 100% disk usage problem might also be caused by some Advanced Host Controller Interface PCI-Express (AHCI PCIe) models running with the inbox StorAHCI.sys driver due to a firmware bug.

Here’s how to determine if this is your problem and fix it:

1) Open Device Manager by pressing Windows logo key and X at the same time to choose Device Manager.

2) Expand the IDE ATA/ATAPI Controllers category, and double-click the AHCI controller.

3) Go to the Driver tab and click Driver Details. If you can see storahci.sys stored in a path of system32 folder, then you are running the inbox AHCI driver.

4) Close the Driver Details window and go to Details tab. From the drop-down menu, select Device Instance Path. Make note of the path, starting from VEN_.

5) Type regedit in the search box of Start panel, then hit Enter on your keyboard to run Registry Editor. Then go to:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\<AHCI Controller>\<Random Number>\Device Parameters\Interrupt Management\MessageSignaledInterruptProperties

The <AHCI Controller> here refers to the name you see from step 2).

The <Random Number> differs on different machines.

6) Double click the MSISupported key and change the value to 0.

7) Restart your computer after the change, then check your computer’s disk usage: Type “task manager” in the Windows search bar and select Task Manager, then in the Processes tab, look at the % at the top of the Disk column. If it’s no longer 100%, you’ve fixed the problem!

Fix 7: Check the health of your disk

You should also check if it’s a hardware problem, which could help you locate the culprit. You don’t need to be a professional to check for disk health, there’re solutions like HD Tune and CrystalDiskInfo in place that can help you find out the stats of your disk.

Here’s how you can check the disk health easily with HD Tune:

1. Download and install the latest version of HD Tune. (The trial version is enough for troubleshooting. You can get a license if you want to learn more about the disk’s performance.)
2. Launch HD Tune. Select the Health tab. Here you can see the S.M.A.R.T info of your disk. (S.M.A.R.T is a monitoring system providing a series of attributes or diagnostics for each disk model.) At this moment, you don’t need to figure out each entry’s meaning — simply check if there’s any one of them has a Status that is not “Ok“. If you see a warning, you may need to google the entry label and determine your next step.
3. On the top left corner, you can toggle the drop down menu to select the disk (if you have multiple). This will allow you to check the health of each disk.

You’d also need to check if the disk has bad blocks. Before you start, note that this process could take hours to complete. You may want to try other fixes before this one.

1. In HD Tune, select the Error Scan tab. First make sure the Quick Scan checkbox is unchecked. Then click Start.
2. Once it completes, check the graph and look for yellow or red blocks. If there’re any red (damaged) blocks, you should consider backing up your data and replace the faulty disk.
3. Again, you can use the drop down menu on the top left corner to scan different disk. It’s recommended you scan all the disk to make sure all your hard drives are in good condiction.

Tips to secure your data: Since hard drives have a finite lifetime and can fail without a warning, consider using a free backup software like AOMEI Backupper to create a system image, especially when the disk carries important data. A backup system protects you against random disk failures.

Fix 8: Switch to ChromeOS

Windows is a very old technology. Sure, Windows 10 is relatively new, but it’s still just the latest iteration of a decades-old operating system, designed for a bygone era (pre-internet).

Now that we have the internet, fast connection speeds, free cloud storage, and endless web apps (like Gmail, Google Docs, Slack, Facebook, Dropbox and Spotify), the entire Windows way of doing things – with locally installed programs and local file storage – is totally outdated.

Why is that a problem? Because when you’re constantly installing uncontrolled third-party programs, you’re constantly opening the door to viruses and other malware. (And Windows’ insecure permission system compounds this problem.)

Plus the way Windows manages installed software and hardware has always been a problem. If your computer shuts down unexpectedly, or a program installs, uninstalls or updates incorrectly, you can get ‘registry’ corruptions. That’s why Windows PCs always slow down and become unstable over time.

Also because everything’s installed and saved locally, it doesn’t take long before you run out of disk space, and your disk gets fragmented, which makes everything even slower and more unstable.

For most people, the simplest way to solve Windows problems is to ditch Windows altogether, and switch to a faster, more reliable, more secure, easier to use and cheaper operating system…

Google ChromeOS.

ChromeOS feels much like Windows, but instead of installing heaps of programs to email, chat, browse the internet, write documents, do school presentations, create spreadsheets, and whatever else you normally do on a computer, you use web apps. You don’t need to install anything at all.

That means you don’t have virus and malware problems, and your computer doesn’t slow down over time, or become unstable.

And that’s just the start of the benefits…

To learn more about the benefits of ChromeOS, and to see comparison videos and demos, visit GoChromeOS.com.

• disk drive
• performance
• Task Manager

17731773 people found this helpful

Available in other languages

Deutsch

[GELÖST] Datenträger 100 ausgelastet | Windows 10 Ihr PC läuft immer langsamer und Sie finden, dass die Datenträgerauslastung im Task-Manager 100% beträgt? Hier bieten wir Ihnen 10 effekttive Lösungen an!

Della Huang

Della Huang

Français

[6 Solutions] Utilisation disque à 100% sur Windows 10 Votre PC se ralentit et la surcharge de votre disque vous ennuie ? 6 solutions avec des images et des étapes détaillées sont présentées ici pour vous.

Vivienne Duan

Vivienne Duan

Help Us Improve Article Label Name* Email* Label Name* Email* 850 Comments Most Voted Newest Oldest Inline Feedbacks View all comments Load Rest of Comments

Related Articles

Fixed: ‘Antimalware Service Executable’ High CPU on Windows 11/10

April Cai 2 weeks ago

How to Connect Two Monitors to My Laptop

Lillian Lai 2 weeks ago

How to Update BIOS in Windows 11

Sophie Luo 2 weeks ago

How to Set Up Three Monitors (2024)

Ellie Zhuang 2 weeks ago

How to Improve Gaming Performance on Windows 11 (2024)

Marcus Liang 2 weeks ago

[SOLVED] Valorant Black Screen On Startup

Brinksley Hong 3 weeks ago

By

Sophie Luo

I'm a technical writer for Driver Easy. Before finding my love for writing tech posts, I had passion for technology goes back much further. I love tinkering with computers, smartphones, and other tech toys. I write articles to help people solve their problems, whether it's a hardware issue or system error. I'm inspired when my articles are of help, and that's what I have been aiming for. All I do every day is to write articles that are easy to read, and I do hope you find instructions in my posts easy to follow.

Contributor(s):

• 
• 
• 
• 

Insert