Sorensen XG 60-14 Programmable DC Power Supply 60V 14A 850W

Output Ratings

Model

Output Voltage¹

Output Current²

Output Power³

XG 6-110

6 V

110 A

670 W

XG 8-100

8 V

100 A

810 W

XG 12-70

12 V

70 A

850 W

XG 20-42

20 V

42 A

850 W

XG 33-25

33 V

25 A

835 W

XG 40-21

40 V

21 A

850 W

XG 60-14

60 V

14 A

850 W

XG 80-10.5

80 V

10.5 A

850 W

XG 100-8.5

100 V

8.5 A

860 W

XG 150-5.6

150 V

5.6 A

850 W

XG 300-2.8

300 V

2.8 A

850 W

XG 600-1.4

600 V

1.4 A

850 W

Line Regulation

Model

Voltage (0.005% of rated output voltage +2 mV)4

Current (0.01% of rated output current +2 mA)5

XG 6-110

2.3 mV

13 mA

XG 8-100

2.4 mV

12 mA

XG 12-70

2.6 mV

9 mA

XG 20-42

3.0 mV

6.2 mA

XG 33-25

3.7 mV

4.5 mA

XG 40-21

4 mV

4.1 mA

XG 60-14

5 mV

3.4 mA

XG 80-10.5

6 mV

3.1 mA

XG 100-8.5

7 mV

2.9 mA

XG 150-5.6

9.5 mV

2.6 mA

XG 300-2.8

17 mV

2.3 mA

XG 600-1.4

32 mV

2.1 mA

Load Regulation

Model

Voltage (0.005% of rated output voltage + 2 mV)6

Current (0.02% of rated output current +5 mA)7

XG 6-110

2.3 mV

27 mA

XG 8-100

2.4 mV

25 mA

XG 12-70

2.6 mV

19 mA

XG 20-42

3.0 mV

13.4 mA

XG 33-25

3.7 mV

10 mA

XG 40-21

4 mV

9.2 mA

XG 60-14

5 mV

7.8 mA

XG 80-10.5

6 mV

7.1 mA

XG 100-8.5

7 mV

6.7 mA

XG 150-5.6

9.5 mV

6.1 mA

XG 300-2.8

17 mV

5.6 mA

XG 600-1.4

32 mV

5.3 mA

Output Ratings

Model

Output Noise (rms, 300 kHz)

Output Ripple (p-p, 20 MHz)

Voltage

Current

Voltage

XG 6-110

8 mV

200 mA

50 mV

XG 8-100

8 mV

180 mA

50 mV

XG 12-70

8 mV

120 mA

50 mV

XG 20-42

8 mV

75 mA

50 mV

XG 33-25

8 mV

60 mA

50 mV

XG 40-21

8 mV

45 mA

50 mV

XG 60-14

8 mV

35 mA

50 mV

XG 80-10.5

8 mV

25 mA

80 mV

XG 100-8.5

8 mV

20 mA

80 mV

XG 150-5.6

10 mV

16 mA

100 mV

XG 300-2.8

25 mV

10 mA

150 mV

XG 600-1.4

50 mV

6 mA

250 mV

1. Maximum output voltage is guaranteed to be 0.1% of the rated voltage at zero output setting, using the front panel or digital remote programming modes. 2. Maximum output current is guaranteed to be 0.2% of the rated current at zero output setting, using the front panel or digital remote programming modes, and when measured with rated load resistance. 3. Total output power is also based on AUX1 Output Voltage (5 V) and AUX1 Output Current (0.5 A) and AUX2 Output Voltage (15 V) and AUX2 Output Current (0.5 A). 4. From 85–132 Vac or 170–265 Vac, constant load. 5. From 85–132 Vac or 170–265 Vac, constant load. 6. From no load to full load, constant input voltage. 7. For load voltage change, equal to the unit voltage rating, constant input voltage. 8. For 6 V models the current ripple is measured at 2–6 V output voltage and full output current. For all other models, the current ripple is measured at 10–100% output voltage and full output current.

Output Ratings

Model

Maximum Recommended Remote Sense Line Drop Compensation per Line 9

Up-prog. Response Time, 0~Vmax 10

Efficiency (100/200 VAC input) 11

XG 6-110

1 V

60 ms

75/77%

XG 8-100

1 V

60 ms

77/80%

XG 12-70

1 V

60 ms

79.5/82.5%

XG 20-42

1.5 V

60 ms

82/85%

XG 33-25

2 V

60 ms

83/86%

XG 40-21

2 V

60 ms

83/87%

XG 60-14

3 V

60 ms

83/87%

XG 80-10.5

5 V

100 ms

83/87%

XG 100-8.5

5 V

100 ms

83/87%

XG 150-5.6

5 V

100 ms

83/87%

XG 300-2.8

5 V

150 ms

83/87%

XG 600-1.4

5 V

250 ms

83/87%

Output Ratings

Model

Down-prog. Response Time: Full Load

Down-prog. Response Time: No Load

Over-Voltage Trip Point

XG 6-110

60 ms

300 ms

0.5–7.5 V

XG 8-100

60 ms

400 ms

0.5–10 V

XG 12-70

60 ms

500 ms

1–15 V

XG 20-42

60 ms

600 ms

1–24 V

XG 33-25

60 ms

700 ms

2–39 V

XG 40-21

60 ms

800 ms

2–44 V

XG 60-14

60 ms

900 ms

3–66 V

XG 80-10.5

100 ms

1000 ms

3–95 V

XG 100-8.5

100 ms

1200 ms

3–125 V

XG 150-5.6

100 ms

1800 ms

3–180 V

XG 300-2.8

150 ms

2200 ms

5–330 V

XG 600-1.4

250 ms

3500 ms

5–660 V

Output Performance Specifications

Temperature Coefficient

100 PPM/° C from rated output voltage, after a 30-minute warm-up*

Drift (8 hours)

0.05% of rated output voltage & current over an 8 hour interval with constant line, load & temperature, after a 30-minute warm-up

Hold-up Time

Typical 20 ms at any rated input line.

Transient Response Time 13

Less than 1 ms for 6 V to 60 V models. Less than 2 ms for 80 V to 600 V models*

Meter Accuracy

0.5% ± 1 count

Isolation 12

1500Vac or 2121Vdc between mains terminals and accessible conductive parts / chassis ground. Output to chassis 500Vac.

Environmental Specifications (Indoor Use)

Operating Temperature Range

32°F to 122°F, 100% load (0°C to 50°C)

Storage Temperature Range

-4°F to 158°F (–20° C to 70°C)

Operating Humidity Range

30–90% RH (no condensation)

Storage Humidity Range

10–95% RH (no condensation)

Operating Altitude

Up to 6,500 feet (2,000 m)

Installation Category

II (IEC 1010-1)

Pollution Degree

2 (IEC 1010-1)

Regulatory Approvals

Safety

CSA 22.2 No. 61010-1, 60950-1-07 and UL61010-1, UL60950-1-(2nd Ed) 12. Marked with cCSAus, CE for EMC & low voltage directive

EMC

Complies with EN61326-1 Complies with EN55022, Class B, FCC Part 15B for conducted emissions Complies with EN55022, Class A, FCC Part 15A for radiated emissions Complies with EN61000-4 series of standards for immunity

9. When using remote sense, the total of the load voltage and the load line drops must not exceed the rated output of the power supply. For example, for an XG 6-110 in an application with 1 V of load line loss (0.5 V/Line), the maximum available load voltage would be 6–1= 5 V. Note: The unit may operate at higher output voltages than this, but there is no guarantee that the power supply will meet performance specifications. Ultimately, the upper limit of the output voltage will be determined by internal circuitry of the power supply (non-adjustable.) 10. With rated, resistive load. 11. At maximum output power. 12. Double insulation on primary to secondary isolation barriers. Basic insulation primary to protective earth ground. 13. Time for the output voltage to recover within 0.5% at its rated output for a load change 10-90% of rated output current. Output set point 10-100%.