Stainless Steel SA-351 CF3M | NovaCast Alloy Specifications

Có thể bạn quan tâm

Home » Technical » Stainless Steel CF3M

Stainless steel SA-351 CF3M is a molybdenum bearing modification of CF3 austenitic steel alloy and is the cast equivalent of wrought AISI 316L stainless steel. It is the low-carbon modification of CF8M. The presence of molybdenum increases the general corrosion resistance and the resistance to pitting by chlorides.

CF3M has similar corrosion resistance and mechanical properties to CF8M. The difference is that the tensile yield strength of CF3M is somewhat less than that of CF8M at ambient temperatures. CF3M alloy is limited to a maximum temperature of 800F. Applications for the low carbon version (CF3M) would include valve bodies, pump casings, flanges, fittings and other pressure-containing parts where excellent corrosion resistance is required and should be used for parts that will be welded and cannot be solution annealed after welding.

For detailed chemical composition, typical mechanical properties and comparative specifications please view the CF3M data sheet by filling out the form below.

Name *

Email *

* Do you consent to us storing and using your personal information to get back in touch with you for marketing communications. Your data will NOT be shared with any 3rd-parties. YesNo

To discuss your requirements, call a member of NovaCast’s team on +44 (0) 1225 707466, send us a message here or email sales@novacast.co.uk.

All information in our data sheets and website is indicative only and is not intended to be a substitute for the full specification from which it is extracted. It is intended to provide typical values to allow comparison between metal alloy options rather than a definitive statement of mechanical performance or suitability for a particular application as these will vary with temperature, product type and product application. It is presented apart from contractual obligations and does not constitute any guarantee of properties or of processing or application possibilities in individual cases. Our warranties and liabilities are stated exclusively in our terms of trading.

Need help selecting the right casting process?

Selecting the best casting process for your project can be a challenge. Our guide covers the criteria you need to consider…

Download PDF guide

Need help with a project? Let’s talk...

Metal Specifications

NovaCast can cast a vast array of both ferrous and non-ferrous alloys using a wide choice of casting processes so we can always advise on the most appropriate combination of alloy and process for each project.

Find out more

Casting Capacities

Casting capacities at our foundry and those of our partners vary with the type of alloy and the process used. We have set out the main capacities in this table as general guidance but please contact us if your project falls outside of these specifications.

Find out more

Data Sheets

The selection of the most appropriate alloy for a casting can be a complex decision that is further complicated by having to cross reference between different standards in many countries. Our range of alloy data sheets covering the most popular alloys cast by us will provide a solid starting point for discussions.

Find out more Previous Next Datasheets and technical guides

Metal Specifications

Non-Ferrous Alloy Specifications (Aluminium and Copper-based) When the NovaCast foundry was created in Melksham over 40 years...