Tool Length Compensation (G43 G44 And G49) - Ques10

Ask Search Ask Question Login × ×

Welcome back.

and 3 others joined a min ago.

Continue with Google

Continue with email

0 1.6kviews Tool Length Compensation (G43 G44 and G49)

written 6.5 years ago by teamques10 ★ 70k

modified 3.8 years ago by krithikkm200 • 10

cad cam cae ADD COMMENT FOLLOW SHARE EDIT 1 Answer 0 30views

written 6.5 years ago by teamques10 ★ 70k

In an CNC Programming Tool length compensation Code is used to adjust for differences in length between different tools, without worrying about those differences in your part program.

This standard length is the Reference Tool. In general, you load the Reference Tool, jog the Z axis down until that tool touches some surface, and set the Z Reference position there. The control memorizes this position of its Z axis. You then load each other tool, bring that tool down until it touches the same surface, and tell the control to measure the tool. The control compares the Z axis position with this tool touching the surface to the previously stored Z Reference position. The difference in Z axis positions is stored as the length offset for the tool.

Clearly, to touch the same surface with a shorter tool, you have to move the Z axis down further. This results in a negative offset. The shorter the tool, the more the negative offset. To touch the same surface with a longer tool, you don't have to move the Z axis down as far. This results in a positive offset. The longer the tool, the larger (or less negative) the offset.

Listed below are the Three G-Code used only for the tool length compensation,

G43 Tool Length Compensation + (plus)

G44 Tool Length Compensation - (Minus)

G49 Cancel Tool length Comp G43 and G44

ADD COMMENT SHARE EDIT Please log in to add an answer. Community

• Users
• Levels
• Badges

Content

• All posts
• Tags
• Dashboard

Company

• About
• Team
• Privacy

Submit question paper solutions and earn money