TOP 3 Mercedes MB CAN Filter At .uk [Statistics]

• 

On basis of website statistics, the customer service makes a list of MB CAN Filters and offered the TOP 3 Mercedes CAN Filter here:

Rank	Item No.	Ordered items	Price
1	SE103-B	MB CAN Filter 8 in 1 for W221 W204 W212 W166 and X166 W172 W218 W246	€40.99
2	SE103	MB CAN Filter 3 in 1 for W222 W217 W205 (New Mercedes Benz S-series C-series)	€36.99
3	SE129	MB CAN Filter 12 in 1 for W221 W204 W207 W212 W166 and X166 W218 W172 W246 W176 W117 W156	€37.30

What is Mercedes CAN filter used for?

Mercedes CAN filter is designed for Mercedes-Benz W221 W204 W207 W212 W166 and X166 W218 W172 W246 W176 W117 W156 etc. models. These filters block old mileage data from EZS module. If you have installed filter on Mercedes-Benz vehicle in EZS module, then original dealer workshop scanner (like Mercedes Star Diagnosis Multiplexer or Xentry) will show same mileage in EZS as in vehicles instrument cluster. Also works for older vehicles like E-class W211, S-class W220, Sprinter. Mercedes-Benz filter can be installed also in instrument cluster, but in this case in EZS-EIS will stay old odometer mileage value.

Where to get MB CAN Filter wring diagram for Mercedes?

MB CAN Filter on Mercedes C-class W204 1- prepare Mercedes CAN filter board check – resistor 121 must be soldered and solder second configuration points like in pictures 2- Remove EZS board from casing. Carefully disconnect board from mechanic – look on picture. 3- Remove from EZS board SMD part marked with red “X”. With short, good isolated wire connect Mercedes CAN filter to EZS board according picture: 1-1 (C1H), 2-2(C1L), 3-3(C2H), 4-4(C2L), 5-5(GND), and 6-6 (+5V). 4- After connection, insulate Mercedes CAN filter board with heat shrink or insulation tape. Put it carefully to EZS casing.

Mercedes-Benz CAN Filter on Mercedes E-class W212 1- prepare Mercedes CAN filter board: check – resistor 121 must be soldered and solder second configuration points like in pictures. 2- Remove EZS board from casing. Carefully disconnect board from mechanic – look on picture. 3- Remove from EZS board SMD part marked with red “X”. With short, good isolated wire connect Mercedes CAN filter to EZS board according picture: 1-1 (C1H), 2-2(C1L), 3-3(C2H), 4-4(C2L), 5- 5(GND), and 6-6 (+5V). 4- After connection, insulate Mercedes CAN filter board with heat shrink or insulation tape. Put it carefully to EZS casing.

Mercedes CAN filter wiring diagram reference: http://obd2-diag.blogspot.com/2016/07/mb-can-filter-wring-diagram-for.html

How to use MB CAN FILTER?

http://www.obdexpress.co.uk/wholesale/yh-mb-can-filter-18-in-1.html

Here add two item more and more popular at obd2express:

SE130

MB CAN Filter 3 in 1 for W222 W217 W205 (New Mercedes Benz S/C series)

SE130-B

MB Can Filter W251 W164 G55

Related posts:

1. MB CAN Filter on Mercedes C-class W204 User Guide
2. MB CAN Filter on Mercedes E-class W212 Connection Diagram
3. How to choose Mercedes MB CAN Filter for your Benz
4. CANEMU CAN Filter for Mercedes C-class W204 installation instructions
5. How to install and connect MB CAN Filter 8-in-1 or 5-in-1

• MB CAN Filter
• MB CAN Filter 12 in 1
• MB CAN Filter 5 in 1
• Mercedes-Benz CAN Filter

Previous article Next article Search for:

• 
• 
• 

Most Viewed

• Digiprog 3 Car List OK via OBD - 70,480 views
• Digiprog 3 update instruction and vehicle list free download - 36,028 views
• New Digiprog 4 Or Digiprog 3,Which One is better? - 32,003 views
• Using Digiprog 3 V4.94 to program EEPROM Guide - 30,537 views
• How to install OBD2 Odometer Correct tool for Ford - 27,957 views
• How to update OBDSTAR X300M Software - 25,333 views
• Obdstar X300M Odometer Correction Car List Download（14-06-2017） - 24,666 views
• Digiprog3 V4.94 Clone Mileage Correction Feedback (Most Comprehensive) - 22,310 views

Categories

• CAN Filter
• Digimaster 3
• Digiprog 3
• GODIAG
• OBDSTAR
• Odometer correction tool
• Tacho Pro
• Uncategorized

Recent Posts

• Yanhua ACDP Module 34 Mileage calibration for VW MK8 Golf 5D
• Yanhua YH35XX: Different mileage in software and dashboard?
• LAUNCH X431 PAD7 Query Actual Mileage of Mercedes-Benz W213
• Can changed language in OBDSTAR ODOMaster?
• How to recover data after Yanhua ACDP2 fails read VW Golf dashboard

Blogroll

• OBDexpress.co.uk
• vvdishop
• vxdiag shop

Archives

Archives Select Month February 2026 January 2026 November 2025 October 2025 September 2025 August 2025 July 2025 June 2025 May 2025 April 2025 March 2025 February 2025 January 2025 December 2024 November 2024 October 2024 September 2024 August 2024 July 2024 June 2024 May 2024 April 2024 March 2024 February 2024 January 2024 December 2023 November 2023 October 2023 September 2023 July 2023 June 2023 May 2023 April 2023 March 2023 February 2023 January 2023 December 2022 October 2022 September 2022 August 2022 July 2022 June 2022 May 2022 April 2022 March 2022 February 2022 January 2022 December 2021 November 2021 October 2021 September 2021 August 2021 July 2021 June 2021 May 2021 April 2021 March 2021 February 2021 January 2021 December 2020 November 2020 October 2020 September 2020 August 2020 July 2020 June 2020 May 2020 April 2020 March 2020 February 2020 January 2020 December 2019 November 2019 October 2019 September 2019 August 2019 July 2019 June 2019 May 2019 April 2019 March 2019 February 2019 January 2019 December 2018 November 2018 October 2018 September 2018 August 2018 July 2018 June 2018 May 2018 April 2018 March 2018 February 2018 January 2018 December 2017 November 2017 October 2017 September 2017 August 2017 July 2017 June 2017 May 2017 April 2017 March 2017 February 2017 January 2017 December 2016 November 2016 October 2016 September 2016 August 2016 July 2016 June 2016 May 2016

Mileageprogrammer SiteMap

Copyright © 2026 | WordPress Theme by MH Themes