TP-LINK TL-WR842N V3.x Default Password & Login ... - RouterReset

Toggle navigation RouterReset

• All routers
• VPN
• Instructions
  • Router Brand database
  • Reset router
  • Router Login
• Router Defaults
  • Default Passwords
  • Default Gateway IPs
  • Common router ips

1. Home
2. Info
3. TP-LINK
4. TL-WR842N v3.x

TL-WR842N v3.x300Mbps Multi-Function Wireless N Router Full size picture

The TP-LINK TL-WR842N v3.x router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.It is also known as the TP-LINK 300Mbps Multi-Function Wireless N Router.It also supports custom firmwares like: OpenWrt, LEDE ProjectQuick links:Default password/LoginLogin instructionsUser ManualsFlashing Custom Firmwares

TL-WR842N v3.x router specifications (specs)

System specsCPU: 650 MHzRAM: 64 MiBFlash: 16 MiBCustom firmwares: OpenWrt, LEDE ProjectConnectivityWiFi: 300mbps (bgn)WiFi bands: 2.4GHzWiFi throughput: n/aWAN: 1 x 100mbps portETH: 4 x 100mbps portsUSB-ports: 0

Hard reset instructions for TP-LINK TL-WR842N v3.x

If your TL-WR842N v3.x router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.Your can reset your TP-LINK TL-WR842N v3.x in the following way(s):

Through the web interface

1. Open a browser and navigate to the web interface of the router (check default settings below)
2. In the menu look for System tools and under there find the Factory defaults option
3. On the Factory defaults page click on the Restore button to perform the reset.

Withe the RESET/WPS button

1. Have the unit powered on
2. Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
3. When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:

1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for TP-LINK TL-WR842N v3.x

If you have performed a reset of your TL-WR842N v3.x device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): TP-LINK_XYXYXYXYXYXYDefault Gateway IP: 192.168.0.1 TP-LINK login instructionsDefault username: admin TP-LINK router default password listDefault password: admin Default subnet mask: 255.255.255.0Default DNS server: 192.168.0.1Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the TL-WR842N v3.x

To login to the 300Mbps Multi-Function Wireless N Router and change the settings, you can follow these steps:

1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
2. Open your browser and visit http://192.168.0.1
3. You should be prompted with a login dialogue.
4. Enter the username: admin and the password adminNote: If you have already changed the password use that instead.
5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common TP-LINK credentials, as they can usually be shared across models/variants.

TL-WR842N v3.x Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.Following are the firmwares that we have identified existing for the TP-LINK TL-WR842N v3.x:

Flashing OpenWrt on the TP-LINK TL-WR842N v3.x

The TP-LINK TL-WR842N v3.x is supported by OpenWrt according to their Table of Hardware. So flashing OpenWrt onto it should be quite straigthforward.We couldn't find any specific instructions for flashin OpenWrt on the TP-LINK TL-WR842N v3.x, but since it's listed in their Table of Hardware as supported, you can head over to the OpenWrt install instructions and read on there.Note: Flashing custom firmwares is always on you're on own risk. Make sure to read OpenWrt's wikis to understand the risks and how to proceed if something goes wrong.

Flashing LEDE Project on the TL-WR842N v3.x

The TP-LINK TL-WR842N v3.x is also supported by the LEDE Project.To install LEDE aquire the correct firmware from their Firmware downloads page and then follow the instructions on their Quick Start GuideNote: Make sure to read the LEDE wikis carefully before flashing.

TP-LINK stock firmware for the TL-WR842N v3.x

Stock firmwares for the TL-WR842N v3.x are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.

Similar routers

TL-WR843N v2.x3CRWER300-73TL-WR845N v3.xXSBox R6vAmp 300 (ARN02304U8)DV 2211Report error on page(If info is incorrect)Share on Facebook Tweet this page Share on Reddit Share on VK Share by e-mail

TL-WR842N v3.x Rating

Find price

Table of contents

• Router Specs
• Factory reset instructions
• Default settings
• Login instructions
• User manuals
• Firmwares
• Similar routers

Reviews & Guides

8 Best VPN Service Providers of 2020. Top 10 Wireless Travel Routers of 2020 Top 7 NAS (Network Attached Storage) Brands of 2020 Top 10 Powerline Network Adapters of 2020 7 Best Routers under $50 of 2020. 10 Best Gaming Routers of 2020 Top Parental Control Routers of 2020 Top 10 Secure Routers of 2020 The Best DD-WRT Routers of 2020. Top 10 802.11ac Wireless Router of 2020

Need a new router?

Best priced routers Gigabit Wireless routers Wireless N routers OpenWRT supported dd-wrt supported

• Knowledge base

  Wireless Routers 101 How to perform the 30 30 30 Hard reset for routers and modems Top 12 Wireless Phone Chargers of 2020.

• Top Models by TP-LINK

  TL-WR841N v13.x TL-WR845N Archer C50 v2.x Archer C2600 v1.x TGR1900 (Google OnHub) Archer C3200 Archer C5 v2.x TD-W8960N v5.x Archer C9 v1.x Archer C7 v2.x TL-WR1043ND v2.x TL-WA901ND v3.x TL-WDR4300 TL-WR702N v1.0 TL-WA801ND v2 TL-WDR3600 TL-WDR3500 TL-WR700N TL-WA5210G TD-W8960N v1.x

• Top Brands

  TP-LINK Netgear Linksys ASUS Belkin Cisco Arris Motorola Xfinity D-Link