User Manual Scheppach HM80Lxu (English - 248 Pages)

Manua.ls Manua.ls Scheppach saws · Scheppach HM80Lxu manual7.7 · 5give review PDF manual  · 272 pages English tutorialquestions specs

Scheppach HM80Lxu

HM80Lxu

Art.Nr.

5901201901

AusgabeNr.

5901201850

Rev.Nr.

03/08/2017

 www.scheppach.com /  [email protected] /  +(49)-08223-4002-99 /  +(49)-08223-4002-58DEZug-, Kapp- und GehrungssägeOriginalbetriebsanleitung6-17GB

Sliding cross cut mitre saw

Translation from the original instruction manual18-28FRScie à ongletTraduction des instructions d’origine29-40NLTrek-, kap- en verstekzaagVertaling van de originele handleiding41-52ITSega circolare per tagli obliquiTraduzione delle istruzioni per l‘uso originali53-64ESSierra de tracción, oscilante y para cortar ingletesTraducción de las instrucciones originales de funcionamiento65-77PTSerra de esquadriaTradução do manual de instruções original78-89CZKapovací a pokosová pila s pojezdemPřeklad originálního návodu k obsluze90-100SKTesárska, kapovacia a pokosová pílaPreklad originálu návodu na obsluhu101-112PLPiła ukośnaTłumaczenie oryginalnej instrukcji obsługi113-124GRΦαλτσοπριονο και πριονι καθετης οπηςΜετάφραση του πρωτοτύπου των οδηγιών χρήσης125-137FIKatkaisu- ja jiirisahaKäännös alkuperäisestä käyttöohjeesta138-149NOTømmer-, kapp- og gjærsagOversettelse av den originale bruksanvisningen150-161SEStock-, kap- och geringssågÖversättning av original-bruksanvisning162-173DKKappe- og Geringssave med udtræckKäännös alkuperäisestä käyttöohjeesta174-185TRGönye ve kırpma makinasıOrjinal operasyon el kitabından çevirilmiştir186-197EEtõmbe-, otsamis- ja eerungisaagTõlge Originaalkasutusjuhend198-209LTDvirankis skersinio ir įstrižinio pjaustymo pjūklasVertimas originali naudojimo instrukcija210-221LVŠķērszāģis, sagarināšanas zāģis un leņķzāģis Tulkošana no oriģinālā lietošanas instrukcija222-232SIPotezna, čelilna in zajerala žagaPrevod originalnih navodil za uporabo233-244HUVonó-, fejező- és gérvágó fűrészForditás az eredeti használati utasitásból245-256HRVlačna, presječna i kutna pilaPrijevod originalnog priručnika za uporabu257-268

Need help?

Do you have a question about the Scheppach HM80Lxu and is the answer not in the manual?

Ask a question

• Receive updates on solutions
• Get answers to your question

1 / 272 Page: 1

Manual

View the manual for the Scheppach HM80Lxu here, for free. This manual comes under the category saws and has been rated by 5 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Scheppach HM80Lxu or do you need help?

Ask your question here

Need help?

Do you have a question about the Scheppach HM80Lxu and is the answer not in the manual?

Ask a question

• Receive updates on solutions
• Get answers to your question

Question and answer

Number of questions: 1MMarek Łataś ·4 years ago

I bought a miter saw and there is no nameplate, only a number on the engine. I would like to know the model of Scheppach.

zoom-in View photoThis message has been automatically translated 0 Same questionType your response here Add my comment

1 comment

EEmma of manua.lsi2 years ago

The sliding miter saw model Scheppach HM80Lxu does not have a nameplate. To find out the model, please check the number on the motor.

This answer is automatically generated 0 Post reactionAsk a question

Product Images (7)

+2

Scheppach HM80Lxu specifications

Below you will find the product specifications and the manual specifications of the Scheppach HM80Lxu.

The Scheppach HM80Lxu is a saw with an input power of 1500 W, making it suitable for various cutting tasks. With an AC input frequency of 50 Hz, it operates efficiently. Its dimensions include a height of 485 mm, a width of 770 mm, and a depth of 700 mm. This saw weighs 12760 g, making it relatively lightweight and easy to maneuver. The blade diameter of the Scheppach HM80Lxu is 210 mm, allowing for precise cuts. The blade has a bore size of 30 mm, ensuring compatibility with a wide range of blades. The maximum idle speed of this saw is 5000 RPM, providing fast and efficient performance. Built with a blade thickness of 1.6 mm, the Scheppach HM80Lxu offers durability and long-lasting use. It is powered by an AC source, enabling consistent and reliable operation. With its compact size and lightweight design, this saw is suitable for both professional and DIY projects. It provides accurate and high-quality cuts, making it a versatile tool for woodworkers and carpenters. The Scheppach HM80Lxu is built with premium materials, guaranteeing its reliability and durability over time. In summary, the Scheppach HM80Lxu is a powerful and efficient saw with a range of useful features. Its compact design, along with its impressive cutting capabilities, makes it an ideal choice for a variety of cutting tasks.

Input power 1500 WHeight 485 mmBlade diameter 210 mmIdle speed (max) 5000 RPM

General

Brand	Scheppach
Model	HM80Lxu | 5901201901
Product	saw
Language	English
Filetype	User manual (PDF)

Power

Input power	1500 W
AC input frequency	50 Hz
AC input voltage	220-240 V
Power source	AC

Weight & dimensions

Height	485 mm
Width	770 mm
Weight	12760 g
Depth	700 mm

Packaging content

Blade diameter	210 mm
Blade bore	30 mm
Blade thickness	1.6 mm

Performance

Idle speed (max)

5000 RPM

show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Scheppach HM80Lxu below.

How can I safely change the blade on my Scheppach HM80Lxu?

Prior to blade replacement, always disconnect the power supply for safety. Loosen the arbor nut using the appropriate wrench, remove the old blade, and securely attach the new blade, ensuring it is properly aligned and tightened. 2

How do I correctly align the blade on my Scheppach HM80Lxu?

Ensure that the blade is parallel to the miter fence and perpendicular to the table by adjusting the blade tilt and position accordingly. 0

What is the recommended speed or RPM for cutting different materials using the Scheppach HM80Lxu?

It is advised to consult the manufacturer's guidelines for specific material cutting speeds. However, for general reference, slower speeds of around 3,000 RPM are suitable for hardwoods, while faster speeds of approximately 4,500 RPM work well for softwoods. 0

How can I efficiently adjust the depth of cut on my Scheppach HM80Lxu?

Utilize the depth adjustment mechanism provided on the saw. Loosen the locking mechanism, adjust the height of the blade, and then firmly tighten the lock in the desired position. 0

How should I maintain and clean my Scheppach HM80Lxu to ensure optimal performance?

Regularly clean the saw's table and remove any debris or sawdust that may accumulate. Lubricate the necessary parts as suggested by the manufacturer to prevent rust and ensure smooth operation. Additionally, perform general maintenance checks periodically to ensure all components are in good condition. 0

What is the input power of the Scheppach HM80Lxu?

The input power of the Scheppach HM80Lxu is 1500 W. This high power rating ensures efficient cutting and makes it suitable for heavy-duty tasks. 0

What is the blade diameter of the Scheppach HM80Lxu?

The blade diameter of the Scheppach HM80Lxu is 210 mm. This larger blade size allows for deeper and wider cuts, making it a versatile saw for various applications. 0

What is the idle speed (max) of the Scheppach HM80Lxu?

The idle speed (max) of the Scheppach HM80Lxu is 5000 RPM. With a high idle speed, this saw is capable of making smooth and precise cuts, especially for cutting through tough materials. 0

What is the blade thickness of the Scheppach HM80Lxu?

The blade thickness of the Scheppach HM80Lxu is 1.6 mm. This thin blade thickness allows for finer and more accurate cuts, making it ideal for projects that require precision. 0

What is the power source of the Scheppach HM80Lxu?

The power source of the Scheppach HM80Lxu is AC. This means it can be powered by a standard electrical outlet, making it convenient and easy to use without the need for batteries or other power sources. 0

What is the weight of the Scheppach HM80Lxu?

The Scheppach HM80Lxu has a weight of 12760 g.

What is the height of the Scheppach HM80Lxu?

The Scheppach HM80Lxu has a height of 485 mm.

What is the width of the Scheppach HM80Lxu?

The Scheppach HM80Lxu has a width of 770 mm.

What is the depth of the Scheppach HM80Lxu?

The Scheppach HM80Lxu has a depth of 700 mm.

How do I remove rust from my Scheppach saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

Is the manual of the Scheppach HM80Lxu available in English?

Yes, the manual of the Scheppach HM80Lxu is available in English .

Is your question not listed? Ask your question here

Related product manuals

Scheppach HM81LXU

manual52 pages

Scheppach HM90Lxu

manual80 pages

Scheppach HM100Lxu

manual272 pages

Scheppach TS310

manual352 pages

Scheppach HM140L

manual148 pages

Scheppach HS110

manual396 pages

Scheppach CSP2540

manual368 pages

Scheppach MT140

manual260 pages

Scheppach DECO-XL

manual308 pages

Scheppach HM216SPX

manual420 pages View all Scheppach manuals View all Scheppach saw manuals