VDSL - Wikipedia

Digital subscriber line technology VDSL

Very high speed digital subscriber line transceivers
Status	In force
Year started	2001
Latest version	(11/15)November 2015
Organization	ITU-T
Committee	ITU-T Study Group 15
Related standards	G.993.1, G.993.2
Domain	telecommunications
License	Freely available
Website	www.itu.int/rec/T-REC-G.993.2

Very high-speed digital subscriber line (VDSL)[1] and very high-speed digital subscriber line 2 (VDSL2)[2] are digital subscriber line (DSL) technologies providing data transmission faster than the earlier standards of asymmetric digital subscriber line (ADSL) G.992.1, G.992.3 (ADSL2) and G.992.5 (ADSL2+).

VDSL offers speeds of up to 52 Mbit/s downstream and 16 Mbit/s upstream,[3] over a single twisted pair of copper wires using the frequency band from 25 kHz to 12 MHz.[4] These rates mean that VDSL is capable of supporting applications such as high-definition television, as well as telephone services (voice over IP) and general Internet access, over a single connection. VDSL is deployed over existing wiring used for analog telephone service and lower-speed DSL connections. This standard was approved by the International Telecommunication Union (ITU) in November 2001.

Second-generation systems (VDSL2; ITU-T G.993.2 approved in February 2006)[5] use frequencies of up to 30 MHz to provide data rates exceeding 100 Mbit/s simultaneously in both the upstream and downstream directions. The maximum available bit rate is achieved at a range of about 300 metres (980 ft); performance degrades as the local loop attenuation increases.

Conceptual development

[edit]

The concept of VDSL was first published in 1991 through a joint Bellcore-Stanford research study. The study searched for potential successors to the then-prevalent HDSL and relatively new ADSL, which were both 1.5 Mbit/s. Specifically, it explored the feasibility of symmetric and asymmetric data rates exceeding 10 Mbit/s on short phone lines.

VDSL2 standard is an enhancement to ITU T G.993.1 that supports asymmetric and symmetric transmission at a bidirectional net data rate up to 400 Mbit/s on twisted pairs using a bandwidth up to 35 MHz.

VDSL standards

[edit]

A VDSL connection uses up to seven frequency bands, so one can allocate the data rate between upstream and downstream differently depending on the service offering and spectrum regulations. The first-generation VDSL standard specified both quadrature amplitude modulation (QAM) and discrete multi-tone modulation (DMT). In 2006, ITU-T standardized VDSL in recommendation G.993.2 which specified only DMT modulation for VDSL2.

Version	Standard name	Common name	Downstream rate	Upstream rate	Approved on
VDSL	ITU G.993.1	VDSL	55 Mbit/s	3 Mbit/s	2001-11-29
VDSL2	ITU G.993.2	VDSL2	200 Mbit/s	100 Mbit/s	2006-02-17
VDSL2-Vplus	ITU G.993.2 Amendment 1 (11/15)	VDSL2 Annex QVPlus/35b	300 Mbit/s	100 Mbit/s	2015-11-06

VDSL2

[edit]

VDSL2 is an enhancement to VDSL designed to support the wide deployment of triple play services such as voice, video, data and high-definition television (HDTV) VDSL2 is intended to enable operators and carriers to gradually, flexibly, and cost-efficiently upgrade existing xDSL infrastructure.

The protocol is standardized in the International Telecommunication Union telecommunications sector (ITU-T) as Recommendation G.993.2. It was announced as finalized on 27 May 2005,[5] and first published on 17 February 2006. Several corrections and amendments were published from 2007 to 2011.[2]

VDSL2 permits the transmission of asymmetric and symmetric aggregate data rates up to 300+ Mbit/s downstream and upstream on twisted pairs using a bandwidth up to 35 MHz on its latest version.[6] It deteriorates quickly from a theoretical maximum of 350 Mbit/s at source to 100 Mbit/s at 500 m (1640.42 ft) and 50 Mbit/s at 1000 m (3280.84 ft), but degrades at a much slower rate from there, and outperforms VDSL. Starting from 1,600 m (1 mi) its performance is equal to ADSL2+.[7]

ADSL-like long-reach performance is one of the key advantages of VDSL2. LR-VDSL2 enabled systems are capable of supporting speeds of around 1–4 Mbit/s (downstream) over distances of 4–5 km (2.5–3 miles), gradually increasing the bit rate up to symmetric 100 Mbit/s as loop-length shortens. This means that VDSL2-based systems, unlike VDSL systems, are not limited to short local loops or MTU/MDUs only,[clarification needed] but can also be used for medium range applications.

Bonding (ITU-T G.998.x) may be used to combine multiple wire pairs to increase available capacity, or extend the copper network's reach. Hybrid Access Networks [8] can be used to combine xDSL with wireless networks. This enables network operators to provide faster Internet access services over long lines.

Vplus/35b

[edit]

Vplus is a technology to achieve higher speeds over existing VDSL2 networks. It was developed by Alcatel-Lucent and standardised in November 2015 in ITU G.993.2 Amendment 1 as VDSL2 profile 35b.[2] It promises to deliver speeds of up to 300 Mbit/s downstream and 100 Mbit/s upstream on loops shorter than 250 m. On longer loops, Vplus falls back to VDSL2 17a vectoring performance.[9] Vplus uses the same tone spacing as VDSL2 17a to allow vectoring across Vplus (35b) and 17a lines, and thus mixed deployments and a smooth introduction of Vplus.[9]

Profiles

[edit]

The VDSL1 standard has three bandplans: Annex A (Asymmetric BandPlan), Annex B (Symmetric BandPlan) and Annex C (Fx BandPlan). Annex A and Annex B were formerly called Plan 998 and Plan 997 respectively. VDSL1 Annex C is intended for use in Sweden only and it uses a variable separating frequency between the second downstream band, and the second upstream band. All VDSL1 bandplans have spectrum up to 12 MHz, so the length of the copper loops must be shorter than ADSL.[10][11]

The VDSL2 standard defines a wide range of profiles that can be used in different VDSL deployment architectures; in the central office, in the cabinet or in the building for example.[12]

Profile	Bandwidth(MHz)	Number of total carriers	Carrier bandwidth(kHz)	Maximum aggregatedownstream transmitpower (dBm)	Max. downstreamthroughput(Mbit/s)	Max. upstreamthroughput(Mbit/s)
8a	8.832	2048	4.3125	+17.5	50	16
8b	8.832	2048	4.3125	+20.5	50	16
8c	8.500	1972	4.3125	+11.5	50	16
8d	8.832	2048	4.3125	+14.5	50	16
12a	12	2783	4.3125	+14.5	68	22
12b	12	2783	4.3125	+14.5	68	22
17a	17.664	4096	4.3125	+14.5	150	50
30a	30.000	3479	8.625	+14.5	230	100
35b	35.328	8192	4.3125	+17.0	300	100

VDSL2 vectoring

[edit]

Vectoring is a transmission method that employs the coordination of line signals for reduction of crosstalk levels and improvement of performance. It is based on the concept of noise cancellation, much like noise-cancelling headphones. The ITU-T G.993.5 standard, "Self-FEXT cancellation (vectoring) for use with VDSL2 transceivers" (2010), also known as G.vector, describes vectoring for VDSL2. The scope of Recommendation ITU-T G.993.5 is specifically limited to the self-FEXT (far-end crosstalk) cancellation in the downstream and upstream directions. The far-end crosstalk (FEXT) generated by a group of near-end transceivers and interfering with the far-end transceivers of that same group is cancelled. This cancellation takes place between VDSL2 transceivers, not necessarily of the same profile.[13][14] The technology is analogous to G.INP and Seamless Rate Adaptation (SRA).[15]

Although technically feasible, as of 2022, vectoring is incompatible with local-loop unbundling, but future standard amendments could bring a solution.[citation needed]

VDSL2+ Supervectoring

[edit]

Supervectoring [de] is an evolution of the vectoring technology invented and widely implemented by Deutsche Telekom,[16][17] which further increases crosstalk and interference resistance and allows for stable internet at home connections at 250 Mbit/s downstream and 100 Mbit/s upstream.

See also

[edit]

• FS-VDSL
• List of interface bit rates
• List of VDSL and VDSL2 deployments

References

[edit]

1. ^ "ITU-T Recommendation G.993.1: Very high speed digital subscriber line transceivers (VDSL)". Retrieved 24 July 2016.
2. ^ a b c "ITU-T Recommendation G.993.2: Very high speed digital subscriber line transceivers 2 (VDSL2)". Retrieved 24 July 2016.
3. ^ "VDSL Speed". HowStuffWorks. 21 May 2001.
4. ^ "G.993.1 (06/04)". ITU.
5. ^ a b "New ITU Standard Delivers 10x ADSL Speeds: Vendors applaud landmark agreement on VDSL2". News release. International Telecommunication Union. 27 May 2005. Retrieved 22 September 2011.
6. ^ "G.993.2 : Very high speed digital subscriber line transceivers 2 (VDSL2)".
7. ^ "Tyrone Fabrication Ltd., Eircom VDSL". Archived from the original on 31 January 2012. Retrieved 8 March 2012.
8. ^ Broadband Forum (2016-07-01). "TR-348 Hybrid Access Broadband Network Architecture" (PDF). Retrieved 2018-07-01.
9. ^ a b Keith Russell; Paul Spruyt; Stefaan Vanhastel (16 October 2014). "Vplus gets more out of VDSL2 vectoring". Alcatel-Lucent. Archived from the original on 25 July 2015.
10. ^ "IT-T xDSLxDSL Standards" (PDF). International Telecommunication Union (ITU). Retrieved 2024-01-08.
11. ^ "Very high speed digital subscriber line transceivers". International Telecommunication Union (ITU). Retrieved 2024-01-08.
12. ^ "G.993.2 : Very high speed digital subscriber line transceivers 2 (VDSL2)".
13. ^ tsbmail (2013-06-14). "G.993.5 : Self-FEXT cancellation (vectoring) for use with VDSL2 transceivers". Itu.int. Retrieved 2013-07-04.
14. ^ "The ITU-T's New G.vector Standard Proliferates 100 Mb/s DSL" (PDF). Archived from the original (PDF) on 2018-12-27. Retrieved 2016-07-24.
15. ^ "What is VDSL Vectoring, SRA and G.INP ?". www.draytek.co.uk. Retrieved 2021-01-25.
16. ^ "Telekom: Magenta Zuhause XL - Alle Tarifdetails auf teltarif.de!". 2020-07-14.
17. ^ heise online (2018-08-16). "Supervectoring: Telekom vermarktet VDSL mit 250 Mbit/s" (in German).

External links

[edit]

• InterOperability Laboratory: Knowledge Base
• InterOperability Laboratory: DSL Testing Services Equipment

v t e Digital subscriber line (DSL) technologies
Symmetric	ANSI / ETSI / ITU-T HDSL HDSL2 and HDSL4 SHDSL Proprietary IDSL SDSL MSDSL Etherloop HVDL DSL Rings
Asymmetric	ANSI / ETSI / ITU-T ADSL ANSI T1.413 Issue 2 G.dmt G.lite ADSL2 Annex J Annex L G.lite.bis ADSL2+ Annex M VDSL and VDSL2 deployment G.fast and MGfast Proprietary ADSL (early CAP variants) RADSL UDSL
Related	DSLAM Ethernet in the first mile Long Reach Ethernet Single Pair Ethernet

v t e ITU recommendations (standards)
Lists: List of ITU-T V-series recommendations List of ITU letter codesCategories: Category:ITU-R recommendations Category:ITU-T recommendations
G series (ITU-T)	G.114 G.165 G.703 G.704 G.706 G.707 G.709 G.711 G.718 G.719 G.722 G.722.1 G.722.2 G.729.1 G.723 G.723.1 G.726 G.728 G.729 G.783 G.798 G.806 G.811 G.983 G.984 G.987 G.988 G.991.1 G.991.2 G.992.1 G.992.2 G.992.3 Annex J Annex L G.992.4 G.992.5 Annex M G.993.1 G.993.2 G.7041 G.7042 G.7043 G.8262 G.9700, G.9701, G.9710 and G.9711 G.9960 G.9970 G.9972
H series (ITU-T)	H.222.0 H.225.0 H.235 H.239 H.241 H.245 H.248 H.261 H.262/MPEG-2 Video H.263 H.264/MPEG-4 AVC H.265/MPEG-H HEVC H.266/MPEG-I VVC H.320 H.323 H.323 Gatekeeper H.324 H.450
V series (ITU-T)	V.10 V.11 V.23 V.24 V.92
ITU-R	ITU-R 468 noise weighting ITU-R BS.1534-1 ITU-R BT.1304 ITU-R BT.470-6 ITU-R BT.470-7 ITU-R BT.601 ITU-R BT.709 ITU-R BT.2020 ITU-R BT.2100
See also: All articles beginning with "ITU"