ViewSonic XG270QC Review

• Recommendations
• Monitor Reviews
• Monitor Articles
• Discussion Forum
• Contact Us

• Home
• /Monitor Reviews
• /ViewSonic XG270QC

Author: Adam Simmons Date published: September 25th 2020

Introduction

For both work and pleasure, 27” WQHD (2560 x 1440) models with high refresh rate can be attractive propositions. There are models available using all three LCD panel type categories, with more emphasis recently on the VA and IPS-type panels. The ViewSonic XG270QC, of the ELITE series, takes the VA route with an emphasis on contrast. This is coupled with features such as a curved screen, Adaptive-Sync (including AMD FreeSync Premium Pro), 165Hz refresh rate and HDR support. We put this monitor through its paces to see how it performs in our usual suite or ‘real world’ tests.

Specifications

The monitor uses a 27” Samsung SVA (‘Super’ Vertical Alignment) with 1500R curve, or more specifically a Samsung CELL with custom backlight. A 165Hz refresh rate and 2560 x 1440 (WQHD) resolution is provided. True 8-bit colour is supported, whilst a 3ms grey to grey response time is specified. A 1ms MPRT (Moving Picture Response Time) is specified using the included strobe backlight setting. You should put very little weight on these specified response times, however. Some of the key ‘talking points’ for this monitor have been highlighted in blue below, for your reading convenience.

*10-bit can be selected in the graphics driver at 120Hz or below when using DP and running at the native resolution. 12-bit can be selected at 60Hz when using HDMI at the native resolution. The panel used is only an 8-bit panel, but the monitor’s scaler can add a dithering stage to facilitate work with higher bit depth content. As an Amazon Associate I earn from qualifying purchases made using the below link. Where possible, you’ll be redirected to your nearest store. Further information on supporting our work. Buy from Amazon