Volvo C30 Belt And Tensioner Replacement (2007-2013)

Trang chủ » Volvo C30 Alternator Belt » Volvo C30 Belt And Tensioner Replacement (2007-2013)

Có thể bạn quan tâm

  • Free Shipping over $99! Lifetime Replacement Program
  • 310-626-8765
Close modal window Close modal window

Selectyour vehicle

Make
  • Porsche
  • BMW
  • Mercedes-Benz
  • Audi
  • Volkswagen
  • Saab
  • Volvo
  • MINI
Year Model

Can't find your vehicle? Click here.

Close modal window Pelican Parts Technical Articles Main Image
  1. Volvo Parts
  2. Volvo C30 (2007-2013) Technical Articles
  3. Volvo C30 Belt and Tensioner Replacement
Volvo C30 Belt and Tensioner Replacement
  • Applicable Models
  • Jump to Photos
  • 5 Comments

Order parts for this project

Applicable Models:

Applicable Models Applicable Models
  • Volvo C30 T5 (2008-13)
  • Volvo C30 T5 R-Design (2008-13)
Rennline Performance Products Lifetime Replacement Parts Pelican Parts Tech Forums
  • Project Time: 1 hour
  • Tab: $30
  • Talent
  • Tools: T50 Torx driver, flathead screwdriver, 13mm socket, torque wrench
  • Parts Required: Belts
  • Performance Gain: Improved engine charging system operation
  • Complementary Modification: Replace timing belt

One of the routine maintenance items that you should perform on your C30 is the inspection and if needed, replacement of your engine belts and/or belt tensioners.

The engine belts are driven off of the crankshaft and drive the alternator and air conditioning compressor. This setup utilizes spring-loaded belt tensioner pulleys that provide the proper tension for each belt at all times, making adjustment unnecessary. This belt should be checked periodically (every 5,000 miles, or when you change your oil).

When inspecting your belts, the one thing that you want to look for is cracks. If you see any cracks at all, you should replace your belt immediately. It's only a matter of time until the belt will snap and possibly leave you stranded.

Replacement of the belts requires jacking up the front end and securing it on jack stands along with removing the right front (looking towards rear of car) tire and also the wheel liner. See our articles on Jacking up Your C30 and Removing Front Wheel Liners for more information.

Note: when re-installing the belt tensioners to the engine, make sure they are seated correctly and torque each bolt to 42Nm (31ftlbs).

Hot tip

Check the condition of each tensioner pulley

Wayne R. Dempsey, Co-Founder & DIY Expert

Jared Fenton, DIY Expert

//

Project Photos

Figure 1 Shown here are the belt assemblies for the Volvo C30. Note the orientation of the belt. You'll need to install the new belts the same way. Begin by inserting a T50 Torx driver into the hole on the outer belt tensioner (green arrow).
Figure 2 Rotate the belt tensioner clockwise to release tension on the belt and slide it off the crankshaft, tensioner and AC compressor pulley. Note the cracks in the belt (green arrow). This is a sign of a belt that is just about to snap.
Figure 3 Loosen and remove the 13mm bolt (green arrow) holding the out belt tensioner to the engine. Carefully maneuver the tensioner out from the engine bay.
Figure 4 The inner belt uses the same sort of tensioner as the outer belt. Insert the T50 Torx driver in the hole (green arrow) on the inner tensioner and turn it counter-clockwise to relieve the tension on the belt. Once loose, carefully remove the belt from the AC compressor, alternator and tensioner pulleys.
Figure 5 The inner tensioner is removed the same way as the outer one. Loosen and remove the 13mm bolt (green arrow) and maneuver the tensioner out of the engine bay.
Figure 6 You'll want to check each tensioner pulley for wear or noise as you spin it. If there is any play or noise, replace the pulley. These are simply bolted on. Use a flathead screwdriver to carefully pop the dust covers (green arrows) off each pulley.
Figure 7 Now use the T50 driver to remove each bolt (green arrows) and remove the pulleys from the tensioners. Fit the new pulleys to each tensioner and you're ready to install them back on the engine along with the new belts.

Parts for this project

Free ShippingOver $99 LifetimeReplacement Built For DIYEnthusiasts

Comments and Suggestions

Wil

July 3, 2020

Do you think the engine number was removed when I had the head replaced?

Followup from the Pelican Staff:

I don't see why someone would. - Nick at Pelican Parts

Jeremy

October 2, 2018

The article mentions replacing the pulley in the last step, but I don't really see pulley for sale as a standalone part, including on pelican parts, only the complete tensioner is for sale / replaced. Pulley looks to be plastic and won't take kindly to pressing the bearing if that is even possible.

Followup from the Pelican Staff:

I can't find it either, probably not available separately. - Nick at Pelican Parts

Tom

August 17, 2018

Hi i need information on how to remove outer small belt between aircon pulley and crankshaft pulley volvo c30 2.0i 2010 petrol engine thank in advance

Followup from the Pelican Staff:

We don't currently have that tech article. If we get a chance to perform the procedure, we will be sure to document it. I would suggest you grab a repair manual, you should own one. It will have the procedure, special tools and torque specs. Give our parts specialists a call at 1-888-280-7799. - Nick at Pelican Parts

Placeholder Alt Text

makoy

December 18, 2017

Which tire and wheel well liner should be removed: driver side front or passenger side front?

Followup from the Pelican Staff:

Right side, when seated in vehicle. - Nick at Pelican Parts

GREGORY

November 27, 2017

Awesome InstructionS Thank You.Fast Question:? I AM INSTALLING Sylvania Stop light Bulbs..Tried to take out Stop light sockets and scratched my hand up real Good.Can i Use Needle Nose Plyers to turn and remove stop light bulb etc..or do i actually have to remove rear tail lenses...Bad design by Volvo!! .You Guys Rock ☆☆

Followup from the Pelican Staff:

You can use pliers. Just keep in mind to work gently and don't force anything. - Nick at Pelican Parts

Placeholder Alt Text

Modal Gallery Slideshow

  • Image caption
  • Show previous slide
  • Show next slide

Modal Gallery Slideshow

  • Image caption
  • Show previous slide
  • Show next slide

Modal Gallery Slideshow

  • Image caption
  • Show previous slide
  • Show next slide

Modal Gallery Slideshow

  • Image caption
  • Show previous slide
  • Show next slide

Modal Gallery Slideshow

  • Image caption
  • Show previous slide
  • Show next slide

Modal Gallery Slideshow

  • Image caption
  • Show previous slide
  • Show next slide

Modal Gallery Slideshow

  • Image caption
  • Show previous slide
  • Show next slide
Add a New Comment MESSAGE: (2,500 Character Max) Your Nickname: Your Email (Optional): Provide to get notified when a staff member responds to your question. Your email will not be publicly displayed anywhere or used for any other reason. Upload a Photo: Choose a file * I have read and agree to abide by the Comment Submission Guidelines. Submit comment

Got more questions? Ask any of our automotive experts.

Technical Forum Message Board Reader Questions About this Article

Applicable Models:

  • Volvo C30 T5 (2008-13)
  • Volvo C30 T5 R-Design (2008-13)

Từ khóa » Volvo C30 Alternator Belt