Voron 0.1 Kit - LDO Docs!

Thank you for purchasing the LDO Voron 0.1 Kit! Before starting your build, we highly recommend checking out our tips and features below.

(LDO Distributors / Resellers check here, BOM check here，Assembly Manual check here)

¶ Features & Extras

• Stainless Steel Linear Rails - That's right, no more worrying about rusty rails. Remember to properly lubricate your linear rails!
• Linear Rail Mounting Bar - Our kit includes 5 custom 7H size linear rail mounting bar to secure the linear rails onto the extrusions, (no need to fiddle with tiny m2 nuts on a thin plastic part)
• Brass Heatset Insert Tool - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.
• Pre-cut & Pre-wired - Our kit includes all necessary wiring: cut to just the right length and pre-crimped or soldered to their respective parts. See our supplementary wiring guide here.
• Partially Threaded Screws - The small pack of partially threaded SHCS screws (M3x30/x35) are for the mini-afterburner, they help reduce wear on the Guidler and Latch parts.
• Hex Wrenches - We found that 1.5mm hex wrenches wear out easily, so we threw in a bunch of them. However, you should definitely still buy a set of good quality hex wrenches.
• Threadlocker - Rev. A kits include a small tube of threadlocker for use on grub(set) screws. Starting from Rev. B, a separate bag of set screws with precoated threadlocker is included.
• 2mm Drill Bit - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.
• RTV Glue - Rev. A kits include a tube of RTV glue for securing the heatpad to the aluminium build plate. Check out this great video by Nero3D for assembling a safe build plate. Starting from Rev. B, build plates will ship partially assembled with the heatpad and RTV glue pre-applied.

¶ Tips

• Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_0_questions channel.
• Since printed parts are NOT included with the kit, it is recommended get them from through the Voron Print It Forward program if you are unable to print them for yourself. They will provide the essential parts for a very reasonable cost to get your printer working.
• Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when the manual is ambiguous or unclear.
• Use the No-Drop Nut mod by zruncho, this mod helps secure hex nuts within the extrusion.
• Check out Nero 3D's Youtube channel, he has a ton of videos on assembling Voron printers.
• Get a serial number once you finish building your Voron.
• The stock LDO kits include 2mm tophat panels, all other panels are 3mm (see supplementary print guide).However, some vendors will include their own unique panels, check with your vendor.
• The Z axis cable chain may include more links than needed. When installing, move the build plate to the top most position, then fit the cable chain and remove links as needed. Beware, if your cable chain is too long, it may interfere with Z homing!

¶ Guides

• Printed Parts Guide (LDO supplement) - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.
• Wiring Guide - We created this supplementary wiring guide to make wiring your printer a breeze.
• Nuts in 1515 Extrusions - See our short guide here for tips on handling nuts in 1515 aluminium extrusions.
• Tuning Guide - We highly recommend reading over this very detailed tuning guide by Ellis to help print out the best possible looking parts.

¶ Bill of Material (BOM)

¶ Build/Review Videos

• Nero 3D's V0.1 Build Marathon
• Vector 3D V0.1 Youtube Playlist
• ModbotArmy V0.1 Youtube Playlist
• This Designed That