What Is The Conversion Factor For Nm3 To Kg/hr In Air Flow

Có thể bạn quan tâm

what is the conversion factor for nm3 to kg/hr in air flow

Question Posted / dhanagopal.v

4 Answers
140740 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

what is the conversion factor for nm3 to kg/hr in air flow..

Answer / hermann

1Nm3 (normal m3) of air is a volume of 1m3 of air under normal conditions of pressure (1 atm = 101.330 kPa) and temperature (0 deg C = 273 K) (Europe); Since air can be assumed to behave as an ideal gas under those conditions, its compressibility factor is 1; so in the relation:PV=ZmRT; Z=1;R for air= 0.287 kPa.m3/(kg.K); V=1m3; therefore 101.330*1=1*m*0.287*273; so m = 1.295 kg. Conversion factor: 1 Nm3/hr = 1.295 kg/hr

Is This Answer Correct ?

167 Yes

44 No

what is the conversion factor for nm3 to kg/hr in air flow..

Answer / kamal joshi

1 Nm3/hr = 1.295 kg/hr

Is This Answer Correct ?

72 Yes

17 No

what is the conversion factor for nm3 to kg/hr in air flow..

Answer / neelakanth pattar

As per ideal gas law PV = mRT Data : P-pressure-101.330Kpa at atm T-273K std R-0.287 Kpa/Kr.k V-1 m3 So. 101.330 x 1 = m x 0.287 x 273 m = 1.295 Kg i.e , 1 Nm3/hr = 1.295 Kg/hr 20 Nm3/hr = 20x1.2929 kg/hr

Is This Answer Correct ?

49 Yes

14 No

what is the conversion factor for nm3 to kg/hr in air flow..

Answer / rajesh gajera

The ideal gas law demonstrates that: PV=nRT in which n=m/M n= mole number m= mass or mass flow (kg/h) V= volume or volumetric flow (m3/hr) M= molecular weight of the gas for example Molecular weight of nitrogen (N2) =28 kg/kgmole In Normal conditions according to the latest SI definition P=100 kpa and T=0 C or 273.15 K R = gas constant =8.314 pa.m3/mol.K So, PV=(m/M)*R*T or m(kg/h) = (P*V*M)/(R*T) at Normal conditions then we have: m(kg/h) = M* 100* V (Nm3/h) / (8.314*273.15) or m(kg/h) = 0.044 M* V (Nm3/h) example: 20 Nm3/h of Nitrogen is equal to: m = 0.044* 28 (molecular weight) * 20 (Nm3/h) m = 7 kg/h

Is This Answer Correct ?

0 Yes

9 No

Post New Answer

More Instrumentation Interview Questions

what do u mean by 2/3 soleniod valves?

8 Answers Nile Sugar,

what are the use of belew gear in general ??

0 Answers

Why went

9 Answers

How process line mpm calculation is done?

0 Answers

control modes

1 Answers Vedanta,

why t/c is connected parallel and what is the purpose of it

2 Answers

Valve positioner and actuators in detail.

0 Answers MIEPL,

Absolute pressure is 700psi,what will be the gauge pressure?

1 Answers IFFCO,

What is the input impedence of an OPAMP as an ideal device.

1 Answers CCIE,

why 4ma show higher zero ? i have transmiter flow renge 0-1000 m3/h but 4 ma show in monitoring 200 m3/h and 20 ma show 1000 m3/h i want when 4ma show 0 m3/h and 20ma 1000m3/h

3 Answers

how we can check level probe and controller

2 Answers

What is hook's law

4 Answers

For more Instrumentation Interview Questions Click Here Categories