Working With Range And Cells In VBA - Excel Champs

Contents hide Introduction to Range and Cells in VBA Range Property Cells Property OFFSET Property More Tutorials

Introduction to Range and Cells in VBA

When you look around in an Excel workbook, you will find that everything works around cells. A cell and a range of cells are where you store your data, and then everything starts.

To make the best of VBA, you need to learn how to use cells and ranges in your codes. For this, you need to have a solid understanding of Range objects. By using it, you can refer to cells in your codes in the following ways:

  • A single cell.
  • A range of cells
  • A row or a column
  • A three-dimensional range

The RANGE OBJECT is a part of Excel’s Object Hierarchy: Application ➜ Workbooks ➜ Worksheets ➜ Range and besides inside the worksheet. So if you are writing code to refer to the RANGE object it would be like this:

Application.Workbook(“Workbook-Name”).Worksheets(“Sheet-Name”).Range

By referring to a cell or range of cells, you can do the following things:

  • You can read the value from it.
  • You can enter a value in it.
  • And, you can make changes to the format.

To do all these things, you need to learn to refer to a cell or a range of cells, and in the next section of this tutorial, you will learn to refer to a cell using different ways. To refer to a cell or a range of cells, you can use three different ways.

  • Range Property
  • Cells Property
  • Offset Property

Well, which one is best out of these depends on your requirement, but it is worth learning all three so that you can choose which one is perfect for you.

So let’s get started.

Range Property

Range property is the most common and popular way to refer to a range in your VBA codes. With the Range property, you simply need to refer to the cell address. Let me tell you the syntax.

expression.range(address)

Here the expression is a variable representing a VBA object. So if you need to refer to the cell A1, the line of code you need to write would be:

Application.Workbook(“Book1”).Worksheets(“Sheet1”).Range(“A1”)

The above code tells VBA that you are referring to cell A1 which is in the worksheet “Sheet1” and workbook ”Book1”.

Note: Whenever you type a cell address in the range object, make sure to wrap it in double quotation marks. But here’s one thing to understand. As you are using VBA in Excel there’s no need to use the word “Application”. So the code would be:

Workbook(“Book1”).Worksheets(“Sheet1”).Range(“A1”)

And if you are in Book1 there you can further trim down your code:

Worksheets(“Sheet1”).Range(“A1”)

But, if you are already in the worksheet “Sheet1” then you can further trim down your code and can only use:

Range(“A1”)

Now, let’s say you want to refer to a full range of cells (i.e., multiple cells) you need to write the code in the following way:

Range("A1:A5")

In the above code, you have referred to the range A1 to A5 which consists of five cells. You can also refer to a named range using the range object. Let’s say you have a named range with the name “Sales Discount” to refer to this you can write a code like this:

Range("Sales Discount")

If you want to refer to a non-continues range then you need to do something like this:

Range("A1:B5,D5:G10")

And if you want to refer to an entire row or a column then you need to enter a code like the one below:

Range("1:1") Range("A:A")

At this point, you have a clear understanding of how to refer to a cell and the range of cells. But to make it best with this you need to learn how to use this to do other things.

u003cstrongu003eu003cemu003ehere we have a complete list of tutorials that you can use to learn to work with ranges and cells in VBAu003c/emu003eu003c/strongu003e.

  • Count Rows using VBA in Excel
  • Excel VBA Font (Color, Size, Type, and Bold)
  • Excel VBA Hide and Unhide a Column or a Row
  • Apply Borders on a Cell using VBA in Excel
  • Find Last Row, Column, and Cell using VBA in Excel
  • Insert a Row using VBA in Excel
  • Merge Cells in Excel using a VBA Code
  • Select a Range/Cell using VBA in Excel
  • SELECT ALL the Cells in a Worksheet using a VBA Code
  • ActiveCell in VBA in Excel
  • Special Cells Method in VBA in Excel
  • UsedRange Property in VBA in Excel
  • VBA AutoFit (Rows, Column, or the Entire Worksheet)
  • VBA ClearContents (from a Cell, Range, or Entire Worksheet)
  • VBA Copy Range to Another Sheet + Workbook
  • VBA Enter Value in a Cell (Set, Get and Change)
  • VBA Insert Column (Single and Multiple)
  • VBA Named Range | (Static + from Selection + Dynamic)
  • VBA Range Offset
  • VBA Sort Range | (Descending, Multiple Columns, Sort Orientation
  • VBA Wrap Text (Cell, Range, and Entire Worksheet)
  • VBA Check IF a Cell is Empty + Multiple Cells

1. Select and Activate a Cell

If you want to select a cell then you can use the Range. Select method. Let’s say if you want to select cell A5 then all you need to do is specify the range and then add “.Select” after that.

Range(“A1”).Select

This code tells VBA to select cell A5 and if you want to select a range of cells then you just need to refer to that range and simply add “.Select” after that.

Range(“A1:A5”).Select

There’s also another method that you can use to activate a cell.

Range(“A1”).Activate

Here you need to remember that you can activate only one cell at a time. Even if you specify a range with the “.Activate method, it will select that range but the active cell will be the first cell of the range.

2. Enter a Value in a Cell

By using the range property you can enter a value in a cell or a range of cells. Let’s understand how it works using a simple example:

Range("A1").Value = "ExcelChamps"

In the above example, you have specified the A1 as a range and after that, you have added “.Value” which tells VBA to access the value property of the cell.

The next thing you have is the equals sign and then the value which you want to enter (you need to use double quotation marks if you are entering a text value). For a number, the code would be like this:

Range("A1").Value = 9988

And if you want to enter a value into a range of cells, I mean multiple cells, then all you need to do is specify that range.

Range("A1:A5").Value = "ExcelChamps"

And, here’s the code if you are referring to the non-continued range.

Range("A1:A5 , E2:E3").Value = "ExcelChamps"

3. Copy and Paste a Cell/Range

With the Range property, you can use the “.Copy” method to copy and cell and then paste it into a destination cell. Let’s say you need to copy the cell A5 the code for this would be:

Range("A5").Copy

When you run this code it will simply copy cell A5 but the next thing is to paste this copied cell to a destination cell. For this, you need to add the keyword destination after it and followed by the cell where you want to paste it. So if you want to copy cell A1 and then want to paste it to cell E5, the code would be:

Range("A1").Copy Destination:=Range("E5")

In the same way, if you are dealing with a range of multiple cells then the code would be like this:

Range("A1:A5").Copy Destination:=Range("E5:E9")

If you have copied a range of cells and then if you have mentioned one cell as the destination range, VBA will copy the entire copied range starting from the cell you have specified as a destination.

Range("A1:A5").Copy Destination:=Range("B1")

When you run the above code, VBA will copy range A1:A5 and will paste it to the B1:B5 even though you have mentioned only B1 as the destination range.

Tip: Just like the “.Copy” method you can use the “.Cut” method to cut a cell and then simply use a destination to paste it.

4. Use Font Property with Range Property

With the range property, you can access the font property of a cell which helps you to change all the font settings. There are a total of 18 different properties for the font which you can access. Let’s say you want to make the text BOLD in cell A1, the code would be:

Range("A1").Font.Bold = True

This code tells VBA to access the BOLD property of the font which is inside the range A1 and you have set this property to TRUE. Now, let’s say you want to apply strikethrough to cell A1, this time code would be:

As I said there are a total of 18 different properties you can use, so make sure to check out all of these to see which one is useful for you.

5. Clear Formatting from a Cell

By using the “.ClearFormats” method you can remove only the format from a cell or a range of cells. All you need to do is add “.ClearFormat” after specifying the range, like below:

Range("A1").ClearFormats

When you run the code above it clears all the formatting from cell A1 and if you want to do it for an entire range, you know what to do, Right?

Range("A1:A5").ClearFormats

Now the above code will simply remove the formatting from the range A1 to A5.

Cells Property

Apart from the RANGE property, you can use the “Cells” property to refer to a cell or a range of cells in your worksheet. In cell property, instead of using the cell reference, you need to enter the column number and row number of the cell.

expression.Cells(Row_Number, Column_Number)

Here the expression is a VBA object and Row_Number is the row number of the cell and Column_Number is the column of the cell. So if you want to refer to the cell A5 you can use the code below code:

Cells(5,1)

Now, this code tells VBA to refer to the cell which is at row number five and at column number one. As its syntax says you need to enter the column number as the address but the reality is you can also use the column alphabet if you want just by wrapping it in double quotation marks.

The below code will also refer to the cell A5:

Cells(5,"A")

And to VBA to select it simply add “.Select” at the end.

Cells(5,1).Select

The above code will select cell A5 which is in the 5th row and in the first column of the worksheet.

OFFSET Property

If you want to play well with ranges in VBA you need to know how to use the OFFSET property. It helps to refer to a cell that is a particular number of rows and columns away from another cell.

Let’s say your active cell is B5 right now and you want to navigate to the cell which is 3 columns right and 1 row down from B5, you can do this OFFSET. Below is the syntax which you need to use for the OFFSET:

expression.Offset (RowOffset, ColumnOffset)
  • RowOffset: In this argument, you need to specify a number that will tell VBA how many rows you want to navigate. A positive number defines a row downward and a negative number defines a row upward.
  • ColumnOffset: In this argument, you need to specify a number that will tell VBA how many columns you want to navigate. A positive number defines a column to the right and a negative number defines a left.

Let’s write a simple code for example which we have discussed above.

  1. First, you need to define the range from where you want to navigate and so type the below code:define-the-range
  2. After that, type “.Offset” and enter opening parentheses, just like below:type-offset
  3. Next, you need to enter the row number and then the column number where you want to navigate.enter-row-and-column number
  4. In the end, you need to add “.Select” to tell VBA to select the cell where you want to navigate.add-select-to-tell-vba

So when you run this code it will select the cell which is one row down and 3 columns right from cell B5.

Resize a Range using OFFSET

OFFSET not only allows you to navigate to a cell, but you can also resize the range further. Let’s continue with the above example.

Range("B5").Offset(1, 3).Select

The above code navigates you to cell E6, and now let’s say you need to select the range of cells that consists of the five columns and three rows from the E6. So what you need to do is after using OFFSET, use the resize property by adding “.Resize”.

Range("B5").Offset(1, 3).Resize

Now you need to enter the row size and column size. Type a starting parenthesis and enter the number to define the row size and then a number to define the column size.

Range("B5").Offset(1, 3).Resize(3,5)

In the end, add “.Select” to tell VBA to select the range, and when you run this code, it will select the range.

Range("B5").Offset(1, 3).Resize(3, 5).Select

So, when you run this code, it will select the range E6 to I8.

Range("A1").Font.Strikethrough = True

More Tutorials

  • Count Rows using VBA in Excel
  • Excel VBA Font (Color, Size, Type, and Bold)
  • Excel VBA Hide and Unhide a Column or a Row
  • Apply Borders on a Cell using VBA in Excel
  • Find Last Row, Column, and Cell using VBA in Excel
  • Insert a Row using VBA in Excel
  • Merge Cells in Excel using a VBA Code
  • Select a Range/Cell using VBA in Excel
  • SELECT ALL the Cells in a Worksheet using a VBA Code
  • ActiveCell in VBA in Excel
  • Special Cells Method in VBA in Excel
  • UsedRange Property in VBA in Excel
  • VBA AutoFit (Rows, Column, or the Entire Worksheet)
  • VBA ClearContents (from a Cell, Range, or Entire Worksheet)
  • VBA Copy Range to Another Sheet + Workbook
  • VBA Enter Value in a Cell (Set, Get and Change)
  • VBA Insert Column (Single and Multiple)
  • VBA Named Range | (Static + from Selection + Dynamic)
  • VBA Range Offset
  • VBA Sort Range | (Descending, Multiple Columns, Sort Orientation
  • VBA Wrap Text (Cell, Range, and Entire Worksheet)
  • VBA Check IF a Cell is Empty + Multiple Cells

⇠ Back to What is VBA in Excel

Helpful Links – Developer Tab – Visual Basic Editor – Run a Macro – Personal Macro Workbook – Excel Macro Recorder – VBA Interview Questions – VBA Codes

Từ khóa » Visual Basic Excel Range Cells