Xavax LED Bulb, G13, 900lm Replaces 18W, Tube T8, 60 Cm, Neutral ...

Use of cookies

I agree Dismiss

This website uses cookies and various web services to provide you with an optimal user experience. By using mandatory cookies, we ensure that all main functions of this website are available to you. With your agreement, further features of our website will become available to you, such as searching for retail shops, product videos and sharing content with friends. You can revoke your agreement at any time. Information on this and even more on the subject of cookies and the various web services can be found in our Privacy Policy.

Privacy Policy

Close ✕

• Home
• Products
• Luminaires and illuminants
• LED illuminants
• G13 led tubes
• 00112571

LED Bulb, G13, 900lm replaces 18W, Tube T8, 60 cm, neutral white, glass F Close ✕ Item Type : LED Tubular Lamp 8,19 EUR SRP VAT included

More product information

• LED tube as an energy-saving replacement for fluorescent tubes
• Easy exchange of fluorescent tubes, which are operated in lamp housing using starters and a conventional AC-adapter (CLB and LLB)
• No conversion of lights required - the supplied dummy starter must, however, be exchanged with the existing starter
• Immediate start without flickering even at low temperatures down to -20°C
• The brightness in the primary beam direction is almost identical to that of fluorescent tubes (except when the light is fitted with highly efficient specular louvres)
• Long service life even when switched on frequently
• Saves about 50% energy compared with conventional fluorescent tubes

What's in the Box

- 1 LED tube- 1 dummy starter- 1 operating instructions

Technical Specs

Colour Reproduction Index RA (min.)	80
Light Colour	Neutral White
Colour Consistency	6
EAR Reg.No.	DE 38720470
Electrical Efficiency Factor of the Bulb (min.)	0.9
Energy Efficiency Class A to G	F
Lamp Lumen Maintenance Factor at 6000h	0.8
Mains Frequency	50 Hz
Nominal Beam Angle	220 °
Nominal Light Output	900 lm
Nominal Power Consumption	9 W
Operating Voltage	230 V
Premature Failure Rate	5 %
Rated Beam Angle	220 °
Rated Light Output	900 lm
Start-Up Time Until 95% of Full Light Output Has Been Reached (max.)	1 s
Weighted Energy Consumption	9 kWh/1000h
Can be Dimmed	No
Colour Temperature	4000 K
Design	T8 ø 26 mm rod-shaped
Lamp socket	G 13
Lamp Survival Factor at 6000h (min.)	0.9
LED Type	SMD
Light color / color temperature	Neutral White - 4000 K
Light efficiency	100 lm/W
Nominal Service Life	30000 h
Number of Switching Cycles until Premature Failure (min.)	30000
Operating Position	360 °
Optimal Ambient Temperature	25 °C
Power Consumption of an Equivalent Incandescent Lamp	18 W
RA-Value	80
Starting Time (max.)	0.5 s
Diameter	29.5 mm
Height	600 mm
Net Weight	122 g
Lamp Current	50 mA
Lamp Lumen Factor at End of Nominal Service Life (min.)	70
Rated Power Consumption	9 W
Rated Service Life	30000 h
Bulb Serves as Replacement for Standard Bulbs of This Size	Fluorescent Tube

Note for Consumers

Only for private use and not for long-term commercial useOnly for use in individual switching (lights have their own starter for each fluorescent tube)Not suitable for electronic ballasts (lights without starters)CLB = Conventional Loss Ballast, the most widespread systemLLB = Low Loss Ballast EB = Electronic BallastAny changes to the wiring should only be carried out by qualified electricians. Incorrect installation could result in injury or damage to property.Before carrying out any conversion work, ensure that there is no voltage. Any defects due to incorrect installation are not covered by the warranty. In addition to the power consumption of the LED tubes, CLBs that have not been disconnected/bypassed in particular have a high and unnecessary power loss and can cause high voltage peaks. Voltage peaks reduce the service life of the tubes. The disconnection/bypass must only be carried out by a qualified electrician. Power loss in LLBs is considerably lower and so disconnection/bypass is not so important.If a light that has been converted to LED tubes is fitted with fluorescent tubes once again, a fluorescent tube starter will need to be refitted. Every light that has been converted to LED tubes should feature a warning notice next to the starter.The overall efficiency and light distribution is determined not just by the characteristics of the LED tubes, but also by the construction and characteristics of the lights.

Downloads

Product Data Sheet

Language English German Download

Manuals

multilingual Download