XH Connector - JST

Có thể bạn quan tâm

Product Catalogue
- PCB Connectors / Tabs
  - Board to Board Connectors
  - Card Edge Connectors
  - FFC/FPC Connectors
  - PC/Memory Card Connectors
  - Ribbon Cable Connectors
  - Wire to Board Connectors (Crimp Type)
  - Wire to Board Connectors (IDC Type)
  - Memory Card Connectors
  - Headers, Pins and Wrap Posts
  - Jumper Connectors
  - Compression & Battery Type Connectors
  - Antenna and Miniature Co-axial Connectors
  - PCB Tab Terminals
- Application Tooling
  - Extraction / Insertion Tools
  - Fully Automatic Crimping Machines
  - Fully Automatic IDC Machines
  - Hand Press (For ID Connectors)
  - Wire Processing Accessories
  - Hand Tools (For Crimp Contacts)
  - Hydraulic Tools (For Closed Barrel Terminals)
  - Pneumatic Press (For ID Connectors)
  - Pneumatic Tools (For Closed Barrel Terminals)
  - Crimping Press (For JST standard applicators)
  - Applicators (JST Standard)
  - Pneumatic Press (For TOR Terminals)
  - Applicators (Industry Standard)
  - Hand Tools (For ID Connectors)
  - Hand Tools (For Non-Insulated Terminals)
  - Hand Tools (For Insulated Terminals)
  - Hand Tools (For Chain Terminals)
  - Applicators (For ID Connectors)
- Crimp Terminals/Splices
  - Bullet Terminal
  - Button Contact
  - Cluster Pin Terminal
  - Cluster Socket
  - Fork Tongue Terminal
  - Ignition Connector
  - Magnet Wire Connector
  - Splice Terminal (Piercing Type)
  - Positive Lock Connector
  - Ring Tongue Terminal
  - Splice Terminal
  - Splice (For Heater Wires)
  - TAB-IN Terminal
  - TAB-IN-TAB Terminal
  - TAB-ON Terminal (Flag)
  - TAB-ON Terminal (Piggyback)
  - TAB-ON Terminal (Straight)
  - TAB-ON-TAB Terminal
  - Microswitch Connector
  - RAST Connector System
- DIN Solderless Terminals/Splices
  - A - Ring Tongue Terminal
  - B - Spade Tongue Terminal
  - C - Parallel Splice
  - D - Butt Splice
  - E - Pin Terminal
  - F - Insulated Disconnect Terminal
- I/O Connectors
  - D Subminiature Connectors
  - I/O (Input/Output) Connectors
  - Mini-DIN Connectors
  - USB Connectors
  - IEEE 1394 Connectors
  - Combination Connectors
  - Modular Jack Connectors
  - AV Connectors
- Solderless Splices
  - Butt Splice
  - Parallel Splice
  - Butt (Window Type) Splice
  - Oval Type Splice
  - Copper Tubular Splice
  - Closed-End Splice
- Solderless Terminals
  - Ring Terminals
  - Fork Tongue Terminal
  - Fork Tongue (Hook) Terminal
  - Spade Tongue Terminal
  - Locking Spade Terminal
  - Flanged Spade Tongue Terminal
  - Bullet Terminal
  - Copper Tubular Lug Terminal
  - Knife Disconnect Terminal
  - Lipped Blade Terminal
  - Pin Terminal
  - Quick Disconnect Terminal
  - Ring Tongue (Double Hole) Terminal
  - Ring Tongue (Flag) Terminal
  - Blade Terminal
  - Wire End Ferrules
- Wire to Wire Connectors
  - Waterproof Connectors
  - Panel Mounted Connectors
  - High Frequency Connectors
  - Hybrid (I/O) Type Connectors
  - General Form Connectors
- Earth Straps
  - A - Shunt Wires (1 Hole Terminal)
  - B - Shunt Wires (2 Hole Terminal)
  - C - Shunt Wires (4 Hole Terminal)
  - D - Shunt Wires (6 Hole Terminal)
  - E - Shunt Wires (9 Hole Terminal)
  - F - Shunt Wires (5 Hole Terminal)
- Tape-on Terminals/Splices
  - A - Ring Tongue Terminal
  - B - Spade Tongue Terminal
  - C - Flanged Spade Tongue Terminal
  - D - Closed-End Splice
  - E - Quick Disconnect Terminal
- Automotive Connectors
  - Wire to Board Crimp style Connectors
  - FFC/FPC Connectors
  - Wire to Wire Connectors
  - High Frequency Connectors
  - Waterproof Connectors
  - Squib Connectors
  - Interface Connectors
  - Board to Board Connectors
  - High Voltage Connector
- Factory Automation Connectors
  - Wire to Board Connectors (Crimp Type)
  - Wire to Wire Connectors
  - I/O (Input/Output) Connectors
- Insulation Sleeves - OBSOLETE
  - Soft Insulation Sleeves - OBSOLETE
- Domestic Appliance
  - Bullet Terminal
  - Button Contact
  - Cluster Pin Terminal
  - Cluster Socket
  - Fork Tongue Terminal
  - Ignition Connector
  - Magnet Wire Connector
  - Microswitch Connector
  - Positive Lock Connector
  - RAST Connector System
  - Ring Tongue Terminal
  - Splice (For Heater Wires)
  - Splice Terminal
  - Splice Terminal (Piercing Type)
  - TAB-IN Terminal
  - TAB-IN-TAB Terminal
  - TAB-ON Terminal (Flag)
  - TAB-ON Terminal (Piggyback)
  - TAB-ON Terminal (Straight)
  - TAB-ON-TAB Terminal
  - General Form Connectors
  - Panel Mounted Connectors
  - Waterproof Connectors
Services
- Sales Support
- Product Technical Support
- Design and Development
- Tooling Technical Support
- Laboratory and Testing
- Warehouse and Logistics
About
- Our Branches worldwide
- Job Opportunities
Contact

Quality Management

We have an organisational structure that is accredited to IATF16949 ‘Quality Management System’. Find out more Search Log in / register GB INBEZA

XH CONNECTOR 2.5mm Pitch Disconnectable Crimp Style Enquire about this product

Features
Specification
Downloads
Tooling
Samples

Enlarge Diagram

The XH connector was developed based on the high reliability and versatility of our NH series connectors.

The connector is very small with a mounting height of 9.8mm (.386"). Yet it meets the needs for high-density mounting and miniaturization of electronic equipment, including VCRs, radio-cassette players, and car stereo systems

Original folded beam contact

The protected, folded beam contact in this connector provides high contact pressure with an over-stress stop feature. This ensures dependable continuity when used with low voltage, low current carrying circuits (dry circuits). The wire crimp section is mechanically decoupled from the post insertion section which, in turn, prevents the mating area from being adversely affected by crimping.

Box-shaped shrouded header

The four-sided, box-shaped shroud prevents the receptacle from being misinserted or pried during insertion and removal. The shroud also prevents foreign matter from reaching the posts and resists contact deformation due to handling and shipping. Furthermore, a serrated, oversized square post is pressure-fit into each square hole to completely protect the post against heat and to prevent flux from entering during dip soldering.

Header with a boss

This header has a boss (projection) on the bottom of the housing to prevent improper insertion in printed circuit boards.

Whisker prevention

The contact is treated with a reflow process and the square post is copper-undercoated and tin/lead-plated to prevent whiskers from being generated.

Interchangeability

This header is interchangeable with those of 2.5mm (.098") pitch insulation displacement NR and NRD connectors and board-to-board JQ connectors.

Conforming to the HA terminal

The 4-circuit XH connector conforms to the HA terminal specified in JEM 1427 (Japanese Electric Machine Industry Association Standards).

Standards

UL Recognized E60389
CSA Certified LR20812
TUV Certified J50014297

RoHS Compliant

01 - Connection Type:	Printed Circuit Board Connectors
02 - Product Type:	Wire to Board Crimp style Connectors
03 - Pitch / Style:	2.50mm
04 - Current rating:	3A AC,DC
05 - Voltage rating:	250V AC,DC
06 - Temperature range:	-25 to +85 Degrees Celsius
07 - Available number of circuits:	1 to 20
13 - PCB Mount Style:	Surface Mount Technology (SMT)
13 - PCB Mount Style:	Through-hole Technology (THT)

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Additional Information

This product series has some additional information related to it that you can download from the list below.

1) Catalogue Page 2) Handling Manual 3) 2D Drawing 4) 3D Model 5) List of Registered Overseas Standards Tool Types

Click on a Tool Type/Category to view related tools to this series.

Applicators (Industry Standard) Applicators (JST Standard) Crimping Press (For JST standard applicators) Extraction / Insertion Tools Hand Tools (For Crimp Contacts) Can't find a Tool?

If you're having trouble finding the right tool, please contact our sales team.