Default Settings Of The Netgear R7000

• Home
• Netgear
• R7000

Login data for the user interface

IP address: 192.168.1.1 (or http://www.routerlogin.net) Username: admin Password: password

Preconfigured Wi-Fi settings

SSID: on a sticker on the router’s case Password: on a sticker on the router’s case

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Netgear R7000, you have to do the following steps for access:

1. Turn on router
2. Establish a connection between the device and the router via network cable or Wi-Fi*
3. Open browser
4. Paste IP address or URL in the address bar and then confirm with ‘Enter’ key
5. Enter username and password in the open user interface and confirm again

This router can also be configured with the provided software.

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Netgear R7000 to its default settings, you have to do the following steps:

1. Turn on router
2. Press Reset button and hold for at least 7 seconds
3. Device is automatically restarted
4. Default settings have been restored

Execute software reset

With the Netgear R7000, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.