E6000 - Eclectic Products

Maybe your like

× Original Glaze Coat Outdoor Glaze Coat ORIGINAL GLAZE COAT Imperial Metric Length (in) Width (in) Thickness per Layer (in) Thickness must be between 0.0625" and 0.25" Invalid fraction Volume (in³) 0.0 Volume (fl oz) 0.0 Surface Area (ft²) 0.0 Side A (Resin) (fl oz) 0.0 Side B (Hardener) (fl oz) 0.0 Product Volume Needed 0.0 fl oz / 0.0 ml Pints 0.0 kits Quarts 0.0 kits Gallons 0.0 kits 24 fl oz / 709 mL 0.0 kits 96 fl oz / 2.8 L 0.0 kits

Available Products:

Home / Adhesives / E6000 / E6000

E6000

E6000 is formulated to meet high performance industrial requirements. The self-leveling formula forms a powerful bond with most any material and will remain flexible once cured. E6000 Industrial will handle just about any project DIYers or PROs throw at it!

Tough – Stronger and 30X more flex than Polyurethane!
Chemical resistant – safe for applications exposed to dilute acids and dilute caustics
Waterproof
Washer/Dryer safe
Paintable – paint to match surrounding area to make UV-resistant
Temperature resistant – unaffected by extreme heat or cold once cured
Flexible – excellent for bonding items subject to vibration

WARNING: This product can expose you to chemicals including toluene which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

Size	Choose an option0.18 fl oz0.50 fl oz1.0 fl oz2.0 fl oz3.7 fl oz10.2 fl oz1 Gallon5 GallonDrum
Color	Choose an optionClearBlackWhite

E6000 quantity Add to cart

Instructions
Product Specs
Data Sheets
FAQs
Product Images

INSTRUCTIONS

Follow these step-by-step directions when using E6000:

Read directions and test small area before use.

Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
TUBE: Puncture inner seal using pointer cap (if tube has a foil seal). CARTRIDGE: Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
Apply directly to surfaces to be bonded or repaired.
Allow 24 hours for curing–Maximum bond strength may not be reached for up to 72 hours.
TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle.
Clean uncured adhesive with acetone or citrus-based solvents.

Product is paintable and immediately resistant to precipitation upon application.

Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products.

PRODUCT SPECS

Sizes Available:	1.0 fl oz, 3.7 fl oz, 10.2 fl oz,
Gallon, 5 Gallon, Drum
Color:	Clear, Black (3.7 oz and 10.2 oz only)

WARNING: This product can expose you to chemicals including perchloroethylene which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

DATA SHEETS

SAFETY DATA SHEET

SDS SHEET REQUESTS: To request an SDS, please use the below link and include the following information

Product name and description.
Product Sales Part Number or UPC (if available).
Product color.
Country of usage.
Language desired.

SDS Request Email Link: [email protected]

TECHNICAL DATA SHEET

E6 Craft TDS US CAN MEX ME AU NZ_REV 6 (English)E6000 Industrial Clr_Blk US CAN MEX TDS – REV 3 (English)

FAQS

What temperature range does E6000 withstand? E6000 can be applied in temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). When cured, E6000 can withstand temperatures between -40 °F and 180 °F (-40 °C and 82 °C).

Is E6000 UV resistant? E6000 may be painted over for maximum UV resistance. Clear E6000 is not formulated for exposure to sunlight.

Can E6000 be used on Styrofoam™? No. E6000 is also not recommended for use on any polystyrene, polyethylene or polypropylene plastics.

Will E6000 crack or break under stress? No, E6000 dries to a rubber-like consistency that is flexible and moves with adhered material.

How long does E6000 take to dry? E6000 starts getting tacky in approximately 2 minutes and begins setting in approximately 10 minutes. A full cure takes between 24 and 72 hours.

Remember, temperature and humidity will affect dry time. To speed drying, apply heat using a handheld dryer set on low. Do not hold heat directly on E6000.

What is used to clean up uncured E6000? Small amounts of acetone or citrus-based solvents for uncured E6000. Cured E6000 may be removed by cutting and scraping.

PRODUCT IMAGES

US 300 dpi / RGB / actual size	150 dpi / RGB / 4 inch\|600 pixels (H)
E6000 0.18 fl oz Tube – Clear 300 dpi US	E6000 0.18 fl oz Tube – Clear 150 dpi US
E6000 0.5 fl oz Tube – Clear 300 dpi US	E6000 0.5 fl oz Tube – Clear 150 dpi US
E6000 1.0 fl oz Tube – Clear 300 dpi US	E6000 1.0 fl oz Tube – Clear 150 dpi US
E6000 3.0 fl oz Carded Tube – Clear 300 dpi US	E6000 3.0 fl oz Carded Tube – Clear 150 dpi US
E6000 3.7 fl oz Tube – Black 300 dpi US	E6000 3.7 fl oz Tube – Black 150 dpi US
E6000 3.7 fl oz Tube – High Viscosity Clear 300 dpi US	E6000 3.7 fl oz Tube – High Viscosity Clear 150 dpi US
E6000 3.7 fl oz Tube – Automotive/Industrial Clear 300 dpi US	E6000 3.7 fl oz Tube – Automotive/Industrial Clear 150 dpi US
E6000 3.7 fl oz Carded Tube – Clear 300 dpi US	E6000 3.7 fl oz Carded Tube – Clear 150 dpi US
E6000 10.2 fl oz Cartridge – Clear 300 dpi US	E6000 10.2 fl oz Cartridge – Clear 150 dpi US
E6000 10.2 fl oz Cartridge – Black 300 dpi US	E6000 10.2 fl oz Cartridge – Black 150 dpi US
E6000 10.2 fl oz Cartridge – HV Clear 300 dpi US	E6000 10.2 fl oz Cartridge – HV Clear 150 dpi US
E6000 Gallon & Larger Can Label 300 dpi US	E6000 Gallon & Larger Can Label 150 dpi US
E6000 Precision Tips 1.0 fl oz Card 300 dpi US	E6000 Precision Tips 1.0 fl oz Card 150 dpi US
E6000 Automotive/Industrial 3.7 fl oz Card 300 dpi US	E6000 Automotive/Industrial 3.7 fl oz Card 150 dpi US

CANADIAN 300 dpi / RGB / actual size	150 dpi / RGB / 4 inch\|600 pixels (H)
E6000 59.1 mL Carded Tube – Clear 300 dpi CA	E6000 59.1 mL Carded Tube – Clear 150 dpi CA
E6000 109.4 mL Carded Tube – Clear 300 dpi CA	E6000 109.4 mL Carded Tube – Clear 150 dpi CA
E6000 301.6 mL Cartridge – Clear 300 dpi CA	E6000 301.6 mL Cartridge – Clear 150 dpi CA