How To Adjust A Water Pressure Switch On A Pump | ESD Waste2Water

How to Adjust a Water Pressure Switch

The ESD Pressure Pump is regulated by a 30 – 50 PSI Pressure Switch to Turn On & Off the pump.  At times the pressure switch needs to be adjusted.

Steps to Pressure Switch Adjustments on a Pump

• Step 1: Using a 5/16” Wrench, remove the pressure switch cove
  • SAFETY ALERT – do not touch any of the exposed wires
•  Step 2: Use a 3/8” to Tighten or loosen the larger spring (Rear Nut) to adjust the On & Off Pressures for the pump
• Step 3: Use a 3/8” to Tighten or loosen the smaller spring (Front Nut) to adjust the Off Pressure only for the pump
• Step 4: Check the adjusts made to the pressure switch – the Pressure Pump should Turn On at 30 PSI and Turn Off at 50 PSI
• Step 5: After adjustments have been made at the Pressure Pump is set, re-install the pressure switch cover

If additional assistance is needed with your pressure switch adjustment contact ESD Waste2Water, Inc Service at 800-277-3279

Recent News

• How to Tackle Heavy Metal Contamination in the Mining Industry
• 7 Sustainable Practices for Mining Operations
• 4 Ways Your Business Can Be More Eco-Friendly
• What Are Oil/Water Separators?
• Guide to Wastewater Nitrogen Removal

Categories

• DIY Videos
• Golf Courses
• Heavy Equipment
• Other
• Pollution
• Remediation
• Trade Shows
• Wash Water

Gallons of Recycled Water Gallons of Treated Water

Featuring our Solids Management System

We have created the ultimate in wash rack solids handling

Latest Blog

One of the earliest forms of environmental contamination is metal mining. This process dates back to...

Read More © 2017-2018, Waste2Water. All Rights Reserved. Privacy Policy ×

Request Information or a Quote

• InstagramThis field is for validation purposes and should be left unchanged.
• Your Name*
• Company Name*
• Email*
• Phone*
• Subject*
• Your Message*

Close