How To Clean And Maintain Your Briggs And Stratton 675 Series ...

Skip to main content Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

How to clean and maintain your Briggs and Stratton 675 Series Carburetor

Introduction

This guide takes a little more work than some of the other lawn mower replacements. You first remove the air filter, and then go behind it to remove and clean the carburetor tank. You will use a socket wrench with a 5/16" and ½" hex bit and a prying tool. Before you get started, you may want to purchase an O-ring if your lawn mower is old, as the O-ring in the carburetor tank may be worn. Cleaning the carburetor may get messy, so do not attempt it inside.

What you need

1. Step 1 How to clean and maintain your Briggs and Stratton 675 Series Carburetor

   

   • Make sure the the engine is off and the spark plug wire is removed and away from the spark plug before beginning.

   • Use a Flathead #4 screw driver to remove the 40mm screw that holds the air filter case in place.

   Edit Add a comment