How To Program A Braeburn Thermostat Within Seconds

RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. As an Amazon Associate, I earn from qualifying purchases.

A few weeks ago, I was visiting my sister. We were having a lot of fun until the thermostat started playing tricks on us.

It was pretty hot outside and for some reason, the cooling inside her house was not working properly.

I check if the issue was with the HVAC system, but it was running properly.

After looking around and testing different equipment, I realized that the thermostat was not working properly.

I had an idea of how to fix Nest Thermostat issues such as the Nest thermostat not connecting to Wi-Fi but I had no idea how to program a Braeburn thermostat.

That is when I started looking for how to troubleshoot a Braeburn thermostat not cooling.

After hours of research, I found the proper way of programming a Braeburn thermostat.

To program a Braeburn thermostat, find its model number and look for its manual in the Braeburn directory. If you cannot find the manual try programming the system by locating the ‘Prog’ button on the device.

In addition to this, I have also mentioned how to replace or reset a Braeburn thermostat.

Find Braeburn Thermostat Model Number

The first thing you have to do is find the Braeburn thermostat model number.

Knowing the model number will help you find the respective model and inform the customer care about the product that you have.

The model number is usually located at the back of the thermostat.

All you have to do is remove the faceplate of the Braeburn thermostat and check the model number.

Braeburn Thermostat Manuals

Once you have the Braeburn thermostat model number, you can check for the manual online.

To check the manual for your Braeburn thermostat go to their official website and enter the model number in the search bar.

Here, you will get access to the most recent and updated manual for the thermostat you own.

Set Braeburn Thermostat

Setting the Braeburn thermostat is not exactly difficult.

These are the steps that you have to follow:

• On the Braeburn thermostat, press the date/time button and set the proper date and time.
• Press the fan button to set the fan setting based on which your HVAC system will operate. You can leave it on at all times or set a timer.

These steps will set up the basics of the thermostat. To set the heating and cooling, you will have to program the system.

Program Braeburn Thermostat

You have to program your Braeburn thermostat according to the weather. The process is fairly simple.

Follow these steps:

• Press the program button on the thermostat.
• Now press the system button. You will land on the temperature setting.
• Now, according to the time of the day, set the temperature setting you need. Use the arrow buttons to navigate.
• Now press the program button to set the mode for when no one is home.
• You will land on the temperature setting.
• Set the temperature setting you need
• Press return to save the program.

Reset Braeburn Thermostat

If you are unable to set the program or if the program is correct but the thermostat is malfunctioning, you might have to reset the thermostat.

Follow these steps:

• Select heat or cold mode from the available options.
• Go to the temperature settings and select a temperature that is at least three to four degrees higher or lower than the outside temperature.
• Now turn the switch of the thermostat off.
• The system will stop running.
• Now, press the reset button.

Note that all the saved settings will be removed after you reset the system.

Replace Braeburn Thermostat Batteries

If your thermostat is not working and the display is blank, there is a chance that the batteries are dead.

To replace the batteries, follow these steps:

• Remove the faceplate of the thermostat.
• You will see the batteries now, remove them.
• Place new batteries in the connect position.
• Put the faceplate back.
• Wait for a few minutes and turn the system back on.

Contact Customer Support

If you are still unable to program the thermostat, contact Braeburn customer support. The experts will be able to help you in a better way.

Conclusion

The Braeburn thermostat comes with several settings and programming options.

You can program the leaving time, sleeping time, returning time, and waking up time.

Based on the time and the activity, you can program the system.

This not only makes the whole process more convenient but also helps in saving a lot of energy.

This setting can be accessed by pressing the program button and using the arrow keys to navigate through the menu.

You May Also Enjoy Reading

• How To Fix Nest Thermostat Not Connecting To Wi-Fi: Complete Guide
• Best Honeywell Thermostat Models for your smart home: we did the research
• Nest Thermostat Blinking Red: How to Fix
• Nest Thermostat Blinking Green: What you need to know

Frequently Asked Questions

How to reset a Braeburn thermostat?

A Braeburn thermostat can be reset using the reset button on the device. However, turn the system off before you reset it.

How do you control a Braeburn thermostat?

Controls on a Braeburn thermostat can be accessed by pressing the program button.

How do I turn off the schedule on my Braeburn thermostat?

You can turn off the schedule on your Braeburn thermostat by accessing the menu or resetting the system.