No MQA On Arcam SA30 (Roon Ready Uncertified) - Support Home » Arcam Sa30 Mqa Support » No MQA On Arcam SA30 (Roon Ready Uncertified) - Support Maybe your like Arcam T61 Am/fm Rds Tuner Arcana Cleric 5etools Arcana Obscura Arcana Obscura Achievements Arcana Obscura Band No MQA on Arcam SA30 (Roon Ready uncertified) Support maciekb (Maciej Biwejnis) September 25, 2020, 4:47pm 1 Core Machine (Operating system/System info/Roon build number) Linux, Roon Core 1.6 build 610 Network Details (Including networking gear model/manufacturer and if on WiFi/Ethernet) Wired network, Netgear switch Audio Devices (Specify what device you’re using and its connection type - USB/HDMI/etc.) Arcam HDA SA30 connected via wired ethernet cable Description Of Issue After being replaced, my Arcam HDA SA30 amplifier does not recognize MQA coding. The MQA symbol was on the previous unit during playback. On the current device, the symbol does not appear on the display, but the correct sample rate is displayed (first picture), according to the audio track in Roon (second picture). Both devices have the same, latest available firmware version (705). When streaming through uPnP (from another application of course) the MQA symbol appears correctly on the display (third picture). photo_2020-09-25 18.46.391280×960 141 KB Zrzut ekranu 2020-09-25 o 18.36.55788×1352 117 KB photo_2020-09-25 18.46.441280×960 139 KB dylan (Dylan Caudill) September 25, 2020, 4:50pm 3 Hi @maciekbm Can you share a screenshot of Device Setup for the Arcam along with a screenshot of the signal path when playing MQA content to the device? Thanks! maciekb (Maciej Biwejnis) September 25, 2020, 4:58pm 4 Of course. When playing this song, the display shows 96kHz, but there is no MQA symbol. Zrzut ekranu 2020-09-25 o 18.52.46800×1456 139 KB Zrzut ekranu 2020-09-25 o 18.52.58794×1444 128 KB Zrzut ekranu 2020-09-25 o 18.53.231164×1548 127 KB Zrzut ekranu 2020-09-25 o 18.53.331166×1536 116 KB maciekb (Maciej Biwejnis) September 25, 2020, 5:03pm 5 Interestingly, the HTTP interface when playing an MQA song shows ORFS [96000], so I guess the correct signal is coming to the device? I didn’t have this problem on the previous unit, the display during MQA song playback showed exactly the same MQA symbol as I showed on one of the previous screenshots when streaming with uPnP. Zrzut ekranu 2020-09-25 o 18.58.35976×1416 111 KB ged_hickman1 September 25, 2020, 5:11pm 6 Do you need to switch off decoding in roon and get the amp to do it for the mqa light? maciekb (Maciej Biwejnis) September 25, 2020, 5:19pm 7 Thanks for the suggestions, but unfortunately that is not it. Below is how the path looks like when you turn off the decoder. Of course the device is still set as Decoder and Renderer. Zrzut ekranu 2020-09-25 o 19.16.42802×1432 129 KB anon44636269 September 25, 2020, 7:49pm 8 Set the mqa cabaliity to renderer in device settings and turn on the mqa core decoder in Roon. If that doesn’t work set the MQA cabability to decoder and renderer and turn off Roons MQA decoder. You need cabaliity to me set to some mqa setting or your dsp will destroy the mqa data. maciekb (Maciej Biwejnis) September 26, 2020, 8:10pm 9 I am happy to say that I managed to fix this case. From the settings of Arcam SA30 I made so called “NET RESET” after which I had to set all network parameters again and upload Dirac curves to the device. After this procedure the MQA signal is correctly recognized and the appropriate symbol is displayed. Zrzut ekranu 2020-09-26 o 22.04.36802×1210 110 KB photo_2020-09-26 22.10.211280×960 163 KB 1 Like maciekb (Maciej Biwejnis) September 26, 2020, 8:15pm 10 Unfortunately, I rushed to announce success. But at least I was able to discover in which case exactly the problem occurs. The MQA symbol disappears from the device when I turn on “Volume Leveling”. Without this MQA is recognized and the symbol appears on the display, after switching on the MQA symbol disappears. My experience so far with NAD C658 and Roon noris October 2, 2020, 5:56pm 11 Hello @maciekb, Since this DAC is not yet Roon Ready, we cannot comment on it’s capabilities or expected behavior until certification has been concluded. If you are still seeing this behavior after the DAC has been fully certified, please let us know and we can take another look, thanks! maciekb (Maciej Biwejnis) October 3, 2020, 4:35pm 12 Thank you, I’ll do that. 1 Like system (system) Closed October 5, 2020, 4:35am 13 This topic was automatically closed 36 hours after the last reply. New replies are no longer allowed. Tag » Arcam Sa30 Mqa Support ARCAM Two-channel Duo Declares Full Support For MQA ARCAM | MQA Partners | Experience The Best Sound No Longer MQA When Using TIDAL - Issues Playback Of MQA-CD Or MQA Encoded Music Files By SA30 MQA Tidal Streaming / Arcam SA30 Query - HiFi Wigwam Arcam's SA30 Flagship Integrated Amplifier Boasts MQA & Roon ... Audirvana Does Not Detect Arcam SA 30 As A MQA Decoder - Arcam SA30 Integrated Amplifier-DAC Streaming Through Arcam SA30-looking For Opinions - AVForums Arcam SA30 - Integrated Amplifier - The Audio Co. Arcam SA30 Review | What Hi-Fi? Arcam SA30 – Arcam SA30 Wireless Streaming Amplifier - Audio T Arcam SA30 Integrated Amplifier - Trutone Electronics