No Powertrain Dtc Or Freeze Frame Data - TrentanceMcdaniel

Maybe your like

2009 Dodge Journey Asked by lordwaltert in Little River SC on March 26 2018 When starting 2009 Dodge Journey v-6 the engine started ran very rough for a few seconds and then the engine stalled. It can tell you what the weather was through the Intake Air Temperature IAT.

Toyota Camry P2118 Etcs Electronic Throttle Control System Problem Toyota Camry Camry Toyota

I see no check engine lights or anything that lets me know there is.

. The scanner says No Powertrain DTCs of Freeze Frame Data is presently stored in the vehicles Computer. I recently changed the battery to my GMC 2013 Denali. Our Scanner Shows No Powertrain Dtcs Or Freeze Frame Data Is Presently D In Vehicle S Computer When I Put My 2017 Touring Elite Dead Battery Constant Vsa And Abs Lights Page 3 Honda Odyssey Forum Dodge Mins Trouble Codes Discussion Geno S Garage Tech Tip Kia Has Intermittent Mil On With No Fault Code D Obd2 Freeze Frame All You Need To Know Autozik.

ASE Certified Technician Associate Degree 1571 satisfied customers Drovemy car died i had it towed and took out all the spark plugs. 3 Understand what a drive cycle is. It was turned off and now it wont No powertrain dtcs or freeze frame data is presently stored Changed O2 sensor bank 1 sensor 1.

Due to the presence of the issue code the check engine light will illuminate. It can even give you the speed of the engine and tires at the moment of the fault as well as how long the engine was on at the time. Save Reply 2 2013 GT500 JH Registered Joined Oct 26 2021 6 Posts.

Car is back to running stock tune. Up to 25 cash back No powertrain dtcs or freeze frame data is presently stored in vehicles computer. It failed because there were no DTCs or freeze frame data.

Michael Petracca Sr. OBD2 reader says No power train DTCS is presently stored in vehicles computer. 1 Fix anything that needs fixing.

A freeze frame can tell you the full state of the engine at the time of the fault. At this point when you turn the ignition key nothing happens. How can I get this fault code reset so my check engine light goes off.

Yes no other hidden mods other than gears and thermostat. Up to 25 cash back No powertrain dtcs or freeze frame data is presently stored in vehicles computer. Fault Code - No Powertrain DTCs or Freeze Frame Data Motor Vehicle Maintenance RepairAsked on April 16 2021 I have a 2013 Dodge Dart that is showing a fault code no powertrain DTCs or freeze frame data is presently stored in vehicle.

Took battery off before connecting new one. Read more rpmdiag High school 10439 satisfied customers 2003 F-250 54 Triton starts easy runs for about 30 seconds 2003 F-250 54 Triton starts easy runs for about 30 seconds and then rough idles and then dies. Took battery off before Changed O2 sensor bank 1 sensor 1.

Since there is a lot of data it may often get. Follow edited Feb 28 2021 at 1325. The CAT O2S and HTR IM monitor status are still red.

5 Execute drive cycles. The proper technique is. Bottom line We hope you now know all that you need to know about viewing the OBD2 freeze frame data.

Find the camera-like icon on the OBD2 scanner. Read more George H. Up to 25 cash back No powertrain DTCs or Freeze Frame Data is presently stored in the vechiles computer according to my INNOVA OBD II diagonistic tool when.

Read more Dan Dealership Technician Associate Degree 2610 satisfied customers Drovemy car died i had it towed and took out all the spark plugs. Click on this camera icon to launch freeze frame report. Does this mean my PCM is toast.

It turns over and it threw a code but when I hooked up the reader all it says is No Powertrain DTCs or Freeze Frame Data is presently stored in vehicles computer. No Powertrain DTC or Freeze Frame Data after battery change. The report contains detailed information.

This icon generally appears next to the DTC code and description. Thanks Buddy Save Coby7 Premium Member Joined Oct 1 2011 11821 Posts 2 Jan 14 2014 No. 2 Stop screwing with it.

Tried 2 different INNOVA scanners and a Subaru scanner both cannot pull any codes when the CEL comes on it keeps showing no powertrain dts or freeze frama data is presently stored and wont allow me to see anything else. 4 Continue stop screwing with it. You will also lose freeze frame data if there is no power supply to the PCM.

Just means there is no code. It can tell you if the engine was hot or cold. I then had to take it to the state for an emissions test.

This could take hundreds of miles over many drives. Freeze Frame Data Indications The data from OBD2 freeze frames are more than just numbers. How can I get this fault code reset so my check engine light goes off.

Also you can manually choose to delete this information by going into the system and following instructions which will depend on the scanner that you have. The freeze frame shows the PID or parameter ID values when a diagnostic trouble code DTC is activated. Up to 25 cash back No Powertrain DTCs or Freeze Frame Data is presently stored No Powertrain DTCs or Freeze Frame Data is presently stored in vehicles computer according to my new INNOVAOBD II Code.

I have a 2013 Dodge Dart that is showing a fault code - no powertrain DTCs or freeze frame data is presently stored in vehicle. Also every time you change a part or read and clear a code etc you reset the drive cycle to zero accomplished. My code reader tells me that as well.

Im not 100 sure if the car is chipped but Im wondering if there no codes being displayed due to the ECU being chipped.

Pin On Smart Electronics