Waterslide Decals: The Ultimate Guide On How To Use Them

FacebookEmailMessengerPinterestPrintShare

Knowing how to use waterslide decals creates fun new crafting possibilities! Learn all you need to know about how to use waterslide decals in this tutorial.

If you're a crafter, you know there are many media you can use to create fantastic new things. There's paint, fabric, vinyl, and much more. Today, I want to show you a new medium: decals. Specifically, waterslide decals.

Decals are images with a sticky backing that you can adhere to your preferred surface. You're probably wondering if decals and stickers are the same thing. The answer is yes, and no.

All decals are stickers, but not all stickers are decals. Here's why: Decals are printed on vinyl, while stickers have a paper backing.

I am here today to show you everything you ever wanted to know about waterslide decals! Plus, I'll show you how to use waterslide paper to make decals for hard surfaces.

This is a great way to transfer an image onto a surface with an inkjet or laser printer, and it might just be the answer you are looking for for a craft project you have in mind. So, let's dive into this craft medium for mugs and more!

Note: If you want more ideas for working with stickers and decals, check out our Summer Stickers, Cricut Car Decals, and KitchenAid Mixer Decals!

Pin

Table of Contents

Toggle

• Waterslide Decals Video Tutorial
• What Are Waterslide Decals?
• How To Make Waterslide Decals
  • Types Of Waterslide Paper
  • Supplies Needed For Waterslide Decals
    • Images Used
  • Sizing And Printing Your Images
  • Sealing The Image
  • Cutting Your Waterslide Paper
• How To Apply Waterslide Decals
  • • Step 1: Submerge Decals In Water
    • Step 2: Clean Mug
    • Step 3: Place Waterslide Decal On Mug
    • Step 4: Push Out Any Air Bubbles
    • Step 5: Dry Up Excess Water
    • Step 6: Set Mug Aside To Dry
    • Step 7: Bake Mug
    • Step 8: Set Mug Aside To Cure
• Waterslide Decals Tips And Tricks
• FAQs About Waterslide Decals
  • Are Waterslide Decals Dishwasher-Safe?
  • Are Water Decals Food-Safe?
  • How Long Do Waterslide Decals Last?
  • What other types of projects can I use waterslide decals for?
• 5 Cricut Vinyl Projects

Waterslide Decals Video Tutorial

You can watch me use waterslide paper to make decals in the video below. This is often the easiest way to explain a process like this, so just hit play on the box below.

Be sure to subscribe to our YouTube channel!

If you can't see the video or missed some steps, I have all the information you need to make your own decals from waterslide paper in written form, too!

What Are Waterslide Decals?

First things first, what are waterslide decals?

They are decals that you can print on with either your laser or your inkjet printer. Then you put a sealer on it, soak it in water to remove the backing, and slide it off the backing onto your surface. You cure it on the surface itself by baking it.

You can apply these decals to hard surfaces, such as mugs, tumblers, and plates.

Pin

How To Make Waterslide Decals

As I mentioned above, if you missed the video or just need written instructions, below is everything you need to know about making and applying your waterslide decals!

Types Of Waterslide Paper

I am using clear waterslide decal paper. This type of paper is available in clear and white, and you can pick the one you prefer for your project. It also comes in versions for both inkjet and laser printers. Be sure to pick the type that works with your printer and the version you want for your project before getting started.

NOTE: Always check the instructions that come with the brand of waterslide decal paper you are using! I am going to walk through the procedure for the brand that I am using below, but double-check that the instructions are the same for your brand.

Pin

Supplies Needed For Waterslide Decals

• Printers Jack Waterslide Decal Paper
• Printer (you can see which I use here)
• Cricut machine (or you can use scissors)
• Spray Sealer – I have linked to the matte version because the gloss version is no longer available. However, if you still want to use gloss, check out this gloss spray sealer alternative.
• Rubbing alcohol
• Paper towel
• Paintbrush
• Water
• Matte tape (if you have issues cutting with a Cricut)
• Mugs, wine glasses, or another surface

Images Used

• Rainbow image
• Cactus image
• Feather image

Pin

Sizing And Printing Your Images

I find that a size of around 2 to 3 inches tall works for most small mugs and wine glasses. You will, of course, need to size your images for the item you are using before printing.

Here are a few printing tips that may help.

• Check settings: make sure to click the glossy paper option and choose the best print quality.
• Cover the entire sheet with decals to maximize the number you can get from one sheet (this paper is relatively expensive).
• Load your paper so it prints on the shiny side. Note: The backside of the brand that I used had writing on it, so it was easy to tell the front from the back.

Pro Tip: You can use Cricut Design Space for this step. For most images, you can use the “flatten” setting or upload as a “print then cut file” into your Cricut. For more complicated images, you may need to place a shape behind the image and flatten it to that shape. There is also a new offset feature in Cricut Design Space that can help.

You can see the exact steps for your Cricut in the video above if you are having issues with the “print then cut” function.

Sealing The Image

After you print, allow the image to dry for at least 10 minutes without touching it.

Once it dries, spray with three coats of acrylic sealer. I like to spray with one coat in each direction. Spray in one direction, then allow to dry for 30 minutes. Turn your paper and spray in another direction, then allow it to dry for 30 minutes. Finally, spray at your last angle and allow to dry for 30 minutes.

I think it's important to note that you can't really tell that the sheet has been sprayed. Once your final coat has dried for at least 30 minutes, you are ready to cut.

Pin

Cutting Your Waterslide Paper

You can use scissors to trim around the images by hand at this point. However, I like to use my Cricut and the “print then cut” function to make things a bit easier.

Note: Make sure to cut all the way through your paper. This is NOT like cutting a sticker with a kiss cut. I use the medium cardstock setting on my Cricut to ensure a clean, thorough cut in this material.

Pin

Pro Tip: If you have trouble cutting your waterslide paper on your Cricut machine, use matte tape around your registration marks after it prints. Usually, this helps the Cricut read the marks and cut them properly.

Pin

How To Apply Waterslide Decals

Now that you have some decals cut out, it is time to apply them to your surfaces!

Step 1: Submerge Decals In Water

You will need some water in a small container or cup for application. Submerge each decal in the water for 30 to 60 seconds. Don't panic when you see it curling slightly; that's normal.

Step 2: Clean Mug

While the decal is soaking, make sure the surface of your mug is clean and dry. I recommend cleaning it with rubbing alcohol and then wiping it down with a clean cloth.

Pin

Note: You may notice that I am using a roll of masking tape under the mug handle to help me hold the mug or wine glass level in these images. You can use whatever works best for you here.

Step 3: Place Waterslide Decal On Mug

Next, wet the surface where you will apply the image. You can use a paintbrush or just your fingers for this. Remove the waterslide decal from the water and place it approximately where you want it on the mug.

The decal should already be separated from the backing paper. Hold the decal with one finger while you slide the backing paper out with the opposite hand. You can move the decal around on the mug at this point because everything is wet.

Step 4: Push Out Any Air Bubbles

Once it is where you want it to stay, start pushing out any bubbles or wrinkles in the decal. You can use your paintbrush for this step.

Step 5: Dry Up Excess Water

Then use a paper towel to push the water out and dry it up. Start in the middle and work your way out to each edge, drying up the water.

Pro Tip: You do need to be pretty gentle on all of these steps.

Pin

Step 6: Set Mug Aside To Dry

Once you have it how you want it and have dried it with your paper towel, let the entire thing dry for at least 3 hours.

Step 7: Bake Mug

Next, bake your waterslide decals according to the package directions. In my case, that was 230 degrees F for 10-15 minutes.

Note: For surfaces like wood that you don't want to bake, you can let them air dry instead.

Pin

Step 8: Set Mug Aside To Cure

After you bake your projects, let them sit for 3 days to set so the colors fully come out.

Once your project has been set, you are ready to use your mug or wine glass. Trust me, you will love working with this fun medium so much that you might want to make some additional projects, as I did!

Pin

Waterslide Decals Tips And Tricks

I ended up liking the decals that were trimmed close around the edge the best.

Additionally, I liked the results from small decals because they looked better overall and were less likely to wrinkle.

Pin

The larger decals tend to show wrinkles and imperfections, especially when applied to a rounded surface.

Pin

This wine glass highlights what happens when you put a clear decal on a clear surface. Notice how you are able to see through the decal.

This is an example of where you might want to use the white waterslide decal paper.

Pin

You will be able to feel these images on the glass, as they sit on top rather than being baked into it or ceramic. It feels similar to when you apply vinyl to the glass.

Pin

FAQs About Waterslide Decals

Here are answers to some of the most frequently asked questions I receive about using waterslide decals. If your question isn’t listed, feel free to drop it in the comments and I’ll be happy to help!

Are Waterslide Decals Dishwasher-Safe?

Unfortunately, they are not dishwasher safe when you apply them using these directions. You will need to hand-wash them.

To make them dishwasher-safe, you would have to do something else to the top to make it more permanent.

For example, if you put a waterslide decal on a tumbler, you could epoxy over the decal. Or, you could try dishwasher-safe Mod Podge on a project like a mug.

You would need to take an extra step to make these waterslide decals dishwasher-safe. It would be similar in that respect to using vinyl that you cut on your Cricut machine. With vinyl, you add it to your mug, then apply a sealer over the top.

Waterslide decals are more like printable vinyl, since you can print on them.

Are Water Decals Food-Safe?

I cannot find anything on them that says they're food-safe.

Products must undergo a rigorous certification process to be deemed food-safe. While these decals may not be toxic, they have not been certified as being food-safe.

When you're making a mug, keep your design about 1/2 an inch below the lip to stay to be safe. This way, your lips would not touch the decal when you're drinking coffee.

How Long Do Waterslide Decals Last?

Because we put that sealer on top, you don't need to worry about the ink fading or washing away.

If you're pretty careful with your mugs or glasses that have waterslide decals and take care of them, they can last for many years. However, do know that with “normal” wear and tear, the glue will start to break down after 3-5 years.

What other types of projects can I use waterslide decals for?

I have seen them used most often on items such as mugs or wine glasses. However, you could use them on ceramic tiles, and I love them on these candles from Fun Stuff Crafts!

Pin

So, now that you know how to use waterslide decals, will you use them to make projects for yourself or someone else? I think you will really like these for a variety of surfaces. Now I want to try using these on wood!

5 Cricut Vinyl Projects

Do you love these waterslide decals and want more vinyl crafts? Check out the projects below!

Pin Cricut Labels: 3 Ways to Make Them Learn about 3 super easy ways to make Cricut labels! These are great ideas for organizing every room in your home in minutes! READ MORE Pin How to Make Cheer Bows with a Cricut Learn how to make a cheer bow with ribbon and heat transfer vinyl cut on your Cricut! Easy to make and your cheerleader will love them! READ MORE Pin Tumbler And Mug Sublimation Using An Oven If you’re looking for a custom mug, you’ll want to know how to create your own mug sublimation using an oven! The process is so much easier than you might think, and you’ll have custom mugs and tumblers in no time! READ MORE Pin Vinly Geometric Art Make your own geometric art piece using all of those scraps of Cricut vinyl that you have been saving! READ MORE Pin Sprinkle Coffee Mug Turn a plain white mug into an adorable sprinkle mug using this easy-to-follow tutorial! READ MORE

Pin

FacebookEmailMessengerPinterestPrintShare