C26000 Cartridge Brass - Atlas Bronze
Atlas carries C26000 Cartridge Brass, sometimes called brass or copper alloy 260, in Sheet / Plate and Tubing. We carry a very large range of sizes and will cut the material to length. Of all the brasses, C26000 is the most ductile and is used in greater quantity than any other copper-zinc alloy.
C26000 Cartridge Brass has excellent to good corrosion resistance in most environments, but is not suitable for use with certain materials, such as acetic acid, moist ammonia or ammonia compounds, hydrochloric acid and nitric acid.
C26000 / 260 Brass Typical Uses
Some of the typical areas that C26000 is used are as follows:- Air Pressure
- Conveyor Systems
- Sound Proofing Equipment
- Chain
- Bead Chain
- Tubing for Instruments and Machines
- Heat Exchangers
- Pump Cylinders
- Wire Screens
- Pumps
- Liners
- Power Cylinders
C26000 / Brass Alloy 260 Chemical Composition
(%max., unless shown as range or min.)
Cu | Fe | Pb | Zn | |
---|---|---|---|---|
Min./Max. | 68.5-71.5 | 0.05 | 0.07 | Rem. |
Nominal | 70 | - | - | 30 |
Note: Cu + Sum of Named Elements, 99.5% min.
C26000 / 260 Brass Mechanical Properties
(measured at room temperature, 68 F (20 C)
Temper | Section | Cold | Typ/ | Temp | Tensile | Yield | Yield | Yield | El | Rockwell | Vickens | Brinell | Shear | Fatigue | Izod | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Work | Min | Strength | Strength | Strength | Strength | Hardness | Hard. | Hard. | Strength | Strength* | Impact | |||||||
(0.5% ext. | (0.2% | (0.05% | Strength | ||||||||||||||||
under load) | offset) | offset) | |||||||||||||||||
in. | % | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb | ||
mm. | C | MPa | MPa | MPa | MPa | MPa | MPa | J | |||||||||||
Tube | |||||||||||||||||||
H80 | 0 | 35 | TYP | 68 | 78 | 64 | - | - | 8 | 82 | - | - | 73 | - | - | - | - | - | 0 |
0 | 20 | 538 | 441 | - | - | 8 | 82 | - | - | 73 | - | - | - | - | - | 0 | |||
Flat Products | |||||||||||||||||||
OS015 | 0.04 | 0 | TYP | 68 | 53 | 22 | - | - | 54 | - | - | 78 | 43 | - | - | - | 35 | 14 | 0 |
1 | 20 | 365 | 152 | - | - | 54 | - | - | 78 | 43 | - | - | - | 241 | 97 | 0 | |||
H02 | 0.04 | 0 | TYP | 68 | 62 | 52 | - | - | 25 | 70 | - | - | 65 | - | - | - | 40 | 18 | 0 |
1 | 20 | 427 | 359 | - | - | 25 | 70 | - | - | 65 | - | - | - | 276 | 124 | 0 | |||
Flat Products | |||||||||||||||||||
H06 | 0.04 | 0 | TYP | 68 | 86 | 65 | - | - | 5 | 88 | - | - | 76 | - | - | - | 46 | - | 0 |
1 | 20 | 593 | 448 | - | - | 5 | 88 | - | - | 76 | - | - | - | 317 | - | 0 | |||
OS100 | 0.04 | 0 | TYP | 68 | 44 | 11 | - | - | 66 | - | - | 54 | 11 | - | - | - | - | 13 | 0 |
1 | 20 | 303 | 76 | - | - | 66 | - | - | 54 | 11 | - | - | - | - | 90 | 0 | |||
OS035 | 0.04 | 0 | TYP | 68 | 49 | 17 | - | - | 57 | - | - | 68 | 31 | - | - | - | 34 | 14 | 0 |
1 | 20 | 338 | 117 | - | - | 57 | - | - | 68 | 31 | - | - | - | 234 | 97 | 0 | |||
H04 | 0.04 | 0 | TYP | 68 | 76 | 63 | - | - | 8 | 82 | - | - | 73 | - | - | - | 44 | 21 | 0 |
1 | 20 | 524 | 434 | - | - | 8 | 82 | - | - | 73 | - | - | - | 303 | 145 | 0 | |||
Flat Products | |||||||||||||||||||
H08 | 0.04 | 0 | TYP | 68 | 94 | 65 | - | - | 3 | 91 | - | - | 77 | - | - | - | 48 | 23 | 0 |
1 | 20 | 648 | 448 | - | - | 3 | 91 | - | - | 77 | - | - | - | 331 | 159 | 0 | |||
Rod | |||||||||||||||||||
OS050 | 1 | 0 | TYP | 68 | 48 | 16 | - | - | 65 | - | - | 65 | - | - | - | - | 34 | - | 0 |
25.4 | 20 | 331 | 110 | - | - | 65 | - | - | 65 | - | - | - | - | 234 | - | 0 | |||
H00 | 1 | 6 | TYP | 68 | 55 | 40 | - | - | 48 | 60 | - | - | - | - | - | - | 36 | - | 0 |
25.4 | 20 | 379 | 276 | - | - | 48 | 60 | - | - | - | - | - | - | 248 | - | 0 | |||
Tube | |||||||||||||||||||
OS025 | 0 | 0 | TYP | 68 | 52 | 20 | - | - | 55 | - | - | 75 | 40 | - | - | - | - | - | 0 |
0 | 20 | 359 | 138 | - | - | 55 | - | - | 75 | 40 | - | - | - | - | - | 0 | |||
Flat Products | |||||||||||||||||||
OS070 | 0.04 | 0 | TYP | 68 | 46 | 14 | - | - | 65 | - | - | 58 | 15 | - | - | - | 32 | 13 | 0 |
1 | 20 | 317 | 97 | - | - | 65 | - | - | 58 | 15 | - | - | - | 221 | 90 | 0 | |||
Rod | |||||||||||||||||||
H02 | 1 | 20 | TYP | 68 | 70 | 52 | - | - | 30 | 80 | - | - | - | - | - | - | 42 | 22 | 0 |
25.4 | 20 | 483 | 359 | - | - | 30 | 80 | - | - | - | - | - | - | 290 | 152 | 0 | |||
Flat Products | |||||||||||||||||||
OS050 | 0.04 | 0 | TYP | 68 | 47 | 15 | - | - | 62 | - | - | 64 | 26 | - | - | - | - | - | 0 |
1 | 20 | 324 | 103 | - | - | 62 | - | - | 64 | 26 | - | - | - | - | - | 0 | |||
Tube | |||||||||||||||||||
OS050 | 0 | 0 | TYP | 68 | 47 | 15 | - | - | 65 | - | - | 64 | 26 | - | - | - | - | - | 0 |
0 | 20 | 324 | 103 | - | - | 65 | - | - | 64 | 26 | - | - | - | - | - | 0 | |||
Flat Products | |||||||||||||||||||
H10 | 0.04 | 0 | TYP | 68 | 99 | 65 | - | - | 3 | 93 | - | - | 78 | - | - | - | - | - | 0 |
1 | 20 | 683 | 448 | - | - | 3 | 93 | - | - | 78 | - | - | - | - | - | 0 | |||
H01 | 0.04 | 0 | TYP | 68 | 54 | 40 | - | - | 43 | 55 | - | - | 54 | - | - | - | 36 | - | 0 |
1 | 20 | 372 | 276 | - | - | 43 | 55 | - | - | 54 | - | - | - | 248 | - | 0 | |||
OS025 | 0.04 | 0 | TYP | 68 | 51 | 19 | - | - | 55 | - | - | 72 | 36 | - | - | - | - | - | 0 |
1 | 20 | 352 | 131 | - | - | 55 | - | - | 72 | 36 | - | - | - | - | - | 0 |
Từ khóa » C26000
-
Machinability
-
C26000 Alloy
-
Cartridge Brass UNS C26000 - AZoM
-
C26000 Copper Alloys Material Property Data Sheet
-
Copper Alloys C26000 70-30 Brass – Austral Wright Metals
-
C26000 Cartridge Brass "70/30" - Aviva Metals
-
UNS C26000 Cartridge Brass Copper Alloy Wire | Ulbrich
-
[PDF] C26000 - KME
-
[PDF] C26000 (CuZn30) - Aurubis
-
C26000 Cartridge Brass (C260) - ASTM B36 | Farmers Copper, LTD.
-
[PDF] C26000 (Cartridge Brass, 70%)
-
Cartridge Brass, UNS C26000 (260 Brass), OS070 Temper Flat ...
-
Brass Alloy C26000 Fasteners
-
ASTM F468/F468M UNS C26000 Brass Bolts, Stud Bolts