Crowcon Xgard (Type 1) Intrinsically Safe Toxic And Oxygen Detector

• ZETTLER
• Ancillary
• Audio Visual
• Call Points
• Detection
• Panels

• FEATURED PRODUCT
• Fireclass Zettler SensorLaser Plus Relay Controller Set

• 8/16/80 RANGE
• Ancillary
• Audio Visual
• Call Points
• Detection
• Panels

• Terms & Conditions
• Returns

• Home
• Crowcon Xgard (Type 1) Intrinsically Safe Toxic and Oxygen Detector

• Part Number: XG1-xx-xx-xx
• Categories: Fixed Detectors (Gas Detection)

• Description
• Datasheets
• Got a Question?

Crowcon Xgard (Type 1) Intrinsically Safe Toxic and Oxygen Detector

The Xgard range is a comprehensive selection of fixed point gas detectors that meet the diverse requirements for gas detection in industries throughout the world. This includes many water treatment, oil and gas, power, research facility and manufacturing installations. Intrinsically Safe (I.S.) or Flameproof (Exd) versions are available, with case options comprising high-grade alloy, stainless steel or chemically resistant GRN polymer. Certifications include IECEx, ATEX, UL, GOST-R and MED. Comes with ATEX as standard, contact us if you need otherwise.

Type 1 detectors are fixed-point Exia Intrinsically Safe toxic and oxygen gas detector using an electrochemical sensor within an Xgard enclosure, which also contains the amplifier/transmitter to provide a 2-wire 4 to 20mA output. Operating temperature -40 to +50°C (range varies for some sensor types). Type 1 Xgard detectors come in a glass-reinforced nylon material as standard.

Overview

Intrinsically Safe (I.S.) or Flameproof (Exd) versions are available, with case options comprising high-grade alloy, stainless steel or chemically resistant GRN polymer. Certifications include IECEx, ATEX, UL and GOST-R.

Low cost of ownership

• Designed for easy installation and maintenance – keeps costs down
• Three junction box options – designed to make replacement of sensors and sinters extremely simple. Spare sensors simply plug-in
• Many spare parts are common to all Xgard models – keeps spares holding requirements to a minimum

Flexible installation options

• Designed for either wall or ceiling mounting – no need for additional brackets
• Can accommodate M20, 1/2? NPT or 3/4? NPT cable glands – suits all site requirements
• High temperature models are available for hot environments (up to 150oc)
• Accessories are available for duct mounting and sampling applications as well as remote gassing – simple sensor checking

Wide range of sensors

• Poison resistant pellistors, for all flammable detection needs including hydrocarbons, hydrogen, ammonia, jet fuel, leaded petrol and vapours containing halogens
• Electrochemical sensors are used to detect a vast range of toxic gases and oxygen
• Thermal conductivity sensors are available to monitor % volume concentrations of gases

Rugged and reliable

• Manufactured using a choice of three materials: glass reinforced nylon, highly durable aluminium with a tough polyester coating, or 316 stainless steel for ultimate corrosion resistance – designed to operate even in the harshest environments
• Spray deflectors and weatherproof caps are available for use in areas subject to regular wash-downs, or offshore environments
• All models have been validated to the functional safety standard IEC 61508 (SIL 1 to SIL 3)

Key Features

• Designed for easy installation and maintenance - keeps costs down
• Many spare parts are common to all Xgard models - keeps spares holding requirements to a minimum
• Designed for either wall or ceiling mounting - no need for additional brackets
• Can accommodate M20, 1/2" NPT or 3/4" NPT cable glands - suits all site requirements (all detectors are sold with 1 x M20 gland as standard, please Contact Us if you need otherwise)
• High temperature models are available for hot environments (up to 150oc)
• Accessories are available for duct mounting and sampling applications as well as remote gassing - simple sensor checking
• Electrochemical sensors are used to detect a vast range of toxic gases and oxygen
• Manufactured using a choice of three materials: glass reinforced nylon, highly durable aluminium with a tough polyester coating, or 316 stainless steel for ultimate corrosion resistance - designed to operate even in the harshest environments
• Spray deflectors and weatherproof caps are available for use in areas subject to regular wash-downs, or offshore environments
• All models have been validated to the functional safety standard IEC 61508 (SIL 1 to SIL 3)

Please Note: this product range is available in a wide variety of different gases. If none of the above models are suitable for you, or if want to know more about the Crowcon products we stock and distribute, please Contact Us or call us on +44 (0)1254 207532 and a member of the team will be happy to assist with your project needs.

Have you got a question about this product?

Email us or Call Us on +44 (0)1254 207532

Related Products

Crowcon Xgard S011918 Duct Mounting Kit

Crowcon Xgard Flamgard Txgard C01052 Spray Deflector

Crowcon Xgard Flamgard Txgard C01051 Collector Cone

Crowcon Xgard Flamgard Txgard C01442 Weatherproof Cap

Crowcon Xgard Txgard C01339 Flow Plate

Crowcon Xgard C011063 Sun Shield

Crowcon Xgard Flamgard Txgard C03005 Calibration Adaptor

Crowcon Ammonia (0-25ppm) Xgard Type 1 Sensor (S011667/S)

£499.80 + VAT

Crowcon Ammonia (0-50ppm) Xgard Type 1 Sensor (S011566/S)

£546.75 + VAT

Crowcon Ammonia (0-100ppm) Xgard Type 1 Sensor (S011567/S)

£546.75 + VAT

Crowcon Bromine (0-3ppm) Xgard Type 1 Sensor (S011658/S)

£572.67 + VAT

Crowcon Carbon Monoxide (0-50ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011572/S)

£393.66 + VAT

Crowcon Carbon Monoxide (0-100ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011574/S)

£393.66 + VAT

Crowcon Carbon Monoxide (0-150ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011576/S)

£393.66 + VAT

Crowcon Carbon Monoxide (0-200ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011578/S)

£393.66 + VAT

Crowcon Carbon Monoxide (0-250ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011259/S)

Crowcon Carbon Monoxide (0-300ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011580/S)

£393.66 + VAT

Crowcon Carbon Monoxide (0-500ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011582/S)

£393.66 + VAT

Crowcon Carbon Monoxide (0-1000ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011584/S)

£393.66 + VAT

Crowcon Carbon Monoxide (0-2000ppm) Xgard Type 1 Replacement Sensor (S011586/S)

£393.66 + VAT

Crowcon Chlorine (0-3ppm) Xgard Type 1 Replacement Sensor (S011588/S)

£477.09 + VAT

Crowcon Chlorine (0-10ppm) Xgard Type 1 Replacement Sensor (S011590/S)

£464.94 + VAT

Crowcon Chlorine (0-100ppm) Xgard Type 1 Replacement Sensor (S011600/S)

Crowcon Chlorine (0-50ppm) Xgard Type 1 Replacement Sensor (S011598/S)

Crowcon Chlorine Dioxide (0-1ppm) Xgard Type 1 Replacement Sensor (S011690/S)

£682.83 + VAT

Crowcon Ethylene Oxide (0-10ppm) Xgard Type 1 Replacement Sensor (S011558/S)

£680.40 + VAT

Crowcon Hydrogen Sulphide (0-10ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011608/S)

£393.66 + VAT

Crowcon Hydrogen Sulphide (0-100ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011616/S)

£393.66 + VAT

Crowcon Hydrogen Sulphide 0-250ppm) Xgard Type 1 Replacement Sensor (S011620/S)

£393.66 + VAT

Crowcon Hydrogen Sulphide (0-1000ppm) Xgard Type 1 Replacement Sensor (S011624/S)

£452.79 + VAT

Crowcon Sulphur Dioxide (0-5ppm) Xgard Type 1 Replacement Sensor (S011636/S)

£435.78 + VAT

Crowcon Sulphur Dioxide (0-20ppm) Xgard Type 1 Replacement Sensor (S011644/S)

£435.78 + VAT

Crowcon Sulphur Dioxide (0-100ppm) Xgard Type 1 Replacement Sensor (S011652/S)

£435.78 + VAT

Crowcon Volatile Organics (0-100ppm) Xgard Type 1 Replacement Sensor (S011560/S)

£554.04 + VAT

Crowcon Hydrogen Sulphide (0-2ppm) Type 1 / Type 2 Replacement Sensor (S011604/S)

£375.03 + VAT

Crowcon Hydrogen Sulphide (0-5ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011606/S)

£393.66 + VAT

Crowcon Hydrogen Sulphide (0-20ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011610/S)

£393.66 + VAT

Crowcon Hydrogen Sulphide (0-30ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011612/S)

£393.66 + VAT

Crowcon Hydrogen Sulphide (0-50ppm) Xgard Type 1 Type 2 Replacement Sensor (S011614/S)

£393.66 + VAT

Crowcon Hydrogen Sulphide (0-200ppm) Xgard Type 1 / Type 2 Replacement Sensor (S011618/S)

£393.66 + VAT

Crowcon Xgard Type 1 (ATEX only) Nylon Sensor Retainer (S012982/S)

£28.35 + VAT

Crowcon Xgard Aluminium Sensor Retainer with Sinter (S012133/S)

£76.95 + VAT