| Good workability , good cold workability. |
| Chemical compound % |
| Agent | Cu | Al | As | Fe | Mn | Ni | Pb | Sn | Zn | Other | Mass-volume g/cm3 | | Mini: | 59,0 | - | - | - | - | - | 1,6 | - | Reste | - | 8,4 | | Maxi: | 60,0 | 0,05 | - | 0,3 | - | 0,3 | 2,5 | 0,3 | - | 0,2 | |
| Mechanical properties of forged parts (EN 12420) : |
| State | Hardness HB min. | Tensile strength Rm N/mm² min. | Conventional elastic limit at 0,2Rp0,2 N/mm² min. | Stretching A % min. | | M | - | - | - | - | | H075 | 75 | (340) | (110) | (20) | | H080 | 80 | (360) | (120) | (20) | |
| Mechanical properties of plates, sheets and coils (EN1652) : |
| State | Thickness | Tensile strength Rm N/mm² | Conventional elastic limit at 0,2 Rp0,2 N/mm² . | Stretching | Hardness HV | | From | to | min. | max. | A50mm ep < or = 2,5 | A ep > 2,5 | min. | max. | | R360 | 0,3 | 5 | 360 | 440 | (max. 270) | 30 | 40 | - | - | | H090 | 0,3 | 5 | - | - | - | - | - | 90 | 120 | | R420 | 0,3 | 5 | 420 | 500 | (min. 270) | 12 | 20 | - | - | | H120 | 0,3 | 5 | - | - | - | - | - | 120 | 150 | | R490 | 0,3 | 5 | 490 | 570 | (min. 420) | 5 | 9 | - | - | | H150 | 0,3 | 5 | - | - | - | - | - | 150 | 180 | | R560 | 0,3 | 2 | 560 | - | (min. 510) | - | - | - | - | | H175 | 0,3 | 2 | - | - | - | - | - | 175 | - | |
| Mechanical properties of bars for screw cutting (EN 12164) : |
| State | Nominal size of the straight section | Tensile strength Rm N/mm² min. | Conventional elastic limit at 0,2Rp0,2 N/mm² | Stretching | Hardness HB ou HV approx | | Diameter mm | Size on flat mm | | from | more than | until and included | from | more than | until and included | A100mm % min. | A11,3 % min. | A % min. | | M | 2 | - | 80 | 2 | - | 60 | | R380 | 6 | - | 40 | 5 | - | 35 | 380 | (160) | - | 16 | 20 | (90) | | R360 | - | 40 | 80 | - | 35 | 60 | 360 | (150) | - | - | 25 | (90) | | R410 | 2 | - | 40 | 2 | - | 35 | 410 | (250) | 10 | 12 | 15 | (120) | | R490 | 2 | - | 6 | 2 | - | 5 | 490 | (370) | (4) | 6 | - | (140) | | R590 | - | 6 | 14 | - | 5 | 10 | 490 | (370) | - | 6 | 8 | (140) | | R550 | 2 | - | 6 | 2 | - | 5 | 550 | (420) | - | - | - | (150) | |
| Mechanical properties of cored bars for screw cutting (EN 12168) : |
| State | Nominal thickness of the walls mm. | Hardness | Tensile strength | Conventional elastic limit at 0,2% | Stretching | | HB | HV | Rm N/mm² approx. | Rp0,2 N/mm² approx. | A % approx. | | until and included | more than | min. | max. | min. | max. | | M | All | Untreated | | H110 | 10 | - | 110 | 160 | 120 | 170 | (410) | (250) | (15) | | H090 | - | 10 | 90 | 140 | 100 | 150 | (360) | (150) | (25) | |
| Mechanical properties of bars for die forging (EN 12165) : |
| State | Nominal size of the straight section | Hardness | Tensile strength Rm N/mm² approx. | Conventional elastic limit at 0,2 % Rp0,2 N/mm² approx. | Stretching A% approx. | | Diameter mm | Size on flat mm | | from | until and included | from | until and included | HB min. | HV min. | | M | All sizes | | H080 | 6 | 80 | 6 | 60 | 80 | 85 | (350) | (140) | (15) | |
| Mechanical properties of wires (EN 12166) : |
| State | Diameter | Tensile strength Rm N/mm² | Conventional elastic limit at 0,2Rp0,2 N/mm² | Stretching | Hardness HV | | from | more than | until | min. | Max. | A100mm % min. | A11,3 % min. | A % min. | min. | max. | | M | All sizes | - | - | - | - | - | - | - | - | | R400 | 0,5 | - | 1,5 | 400 | - | (200) | - | - | - | - | - | | R400 | - | 1,5 | 4,0 | 400 | - | (200) | 10 | - | - | - | - | | H110 | 1,5 | - | 4,0 | - | - | - | - | - | - | 110 | 140 | | R390 | - | 4,0 | 8,0 | 390 | - | (180) | - | 15 | - | - | - | | R380 | - | 8,0 | 20,0 | 380 | - | (180) | - | - | 20 | - | - | | H100 | - | 4,0 | 20,0 | - | - | - | - | - | - | 100 | 130 | | R450 | 0,5 | - | 1,5 | 450 | - | (300) | - | - | - | - | - | | R440 | - | 1,5 | 4,0 | 440 | - | (300) | 8 | - | - | - | - | | H130 | 1,5 | - | 4,0 | - | - | - | - | - | - | 130 | 160 | | R430 | - | 4,0 | 8,0 | 430 | - | (300) | - | 10 | - | - | - | | R420 | - | 8,0 | 20,0 | 420 | - | (300) | - | - | 15 | - | - | | H120 | - | 4,0 | 20,0 | - | - | - | - | - | - | 120 | 155 | | R500 | 0,5 | - | 1,5 | 500 | - | (400) | - | - | - | - | - | | R500 | - | 1,5 | 4,0 | 500 | - | (400) | 4 | - | - | - | - | | H150 | 1,5 | - | 4,0 | - | - | - | - | - | - | 150 | 180 | | R490 | - | 4,0 | 8,0 | 490 | - | (400) | - | 5 | - | - | - | | R480 | - | 8,0 | 14,0 | 480 | - | (400) | - | - | 8 | - | - | | H140 | - | 4,0 | 14,0 | - | - | - | - | - | - | 140 | 170 | | R570 | 1,5 | - | 4,0 | 570 | - | (520) | - | - | - | - | - | | H165 | 1,5 | - | 4,0 | - | - | - | - | - | - | 165 | - | |
| Mechanical properties of sections and rectangular bars (EN 12167): |
| State | Sizes | Tensile strength Rm N/mm² min. | Conventional elastic limit at 0,2Rp0,2 N/mm² | Stretching A % | Hardness | | Section | Rectangular bars thickness mm | | > at | < or = | HB min. | HV min | | M | All | All | | | | | | | R460 | - | - | 6 | 460 | (320) | (8) | - | - | | H120 | - | - | 6 | - | - | - | 120 | 125 | | R410 | - | 6 | 60 | 410 | (190) | (20) | - | - | | H105 | - | 6 | 60 | - | - | - | 105 | 110 | |
| Average physical and mechanical properties (for information only): |
| Average physical properties: | | Liquidus temperature (°C) | Solidus temperature (°C) | Solidification range (°C) | Mass-volume at 20°C (kg/dm3) | Linear expansion coefficient (10-6/°C) | | 895 | 880 | 15 | 8,45 | 20 | | Massive heat capacity at 20°C (J/kg.K) | Heat conductivity at 20°C (W/m.K) | Electrical conductivity at 20°C (%IACS) | Electrical resistivity at 20° C (10-8 W.m) | Coefficient of resistivity temperature from 0 to 100°C (10-3°C) | | 376 | 117 | 27 | 6,4 | 1,6 | | Average mechanical properties: | | Young's modulus (MPA) | Modulus of twisting (MPA) | Poisson's ratio | | Annealing | Strain aging | Annealing | Strain aging | | - | 96000 | - | 35000 | ± 0,35 | |
