CW612N - Patel Metal Alloys

CW612N Home > Metal > Forging Brass > CW612N

Chemical Composition

Elements	Min (%)	Max (%)
Cu	59.00	60.00
Pb	1.60	2.50
Sn	-	0.30
Fe	-	0.30
Al	-	0.05
Ni	-	0.30
Total Others	-	0.20
Zn	Remainder

Mechanical Properties According To EN12164 (As Per Temper R410)

Range (mm)		From	To	UTS Min (N/mm²)	PS Min (N/mm²)	Elongation Min (%)	Hardness Min	Hardness Max
Round (Dia)		2	40	410	230	12	-	-
Hex (A/F)		2	35	410	230	12	-	-
Square (A/F)		2	35	410	230	12	-	-

PHYSICAL PROPERTIES
Melting Point - Liquidus°F	1640
Melting Point - Solidus°F	1620
Density lb/cu in. at 68°F	0.305
Specific Gravity	8.44
Electrical Conductivity % IACS at 68°F	27
Thermal Conductivity Btu/ sq ft/ ft hr/ °F at 68°F	69
Coefficient of Thermal Expansion 68-57210⁻⁶ per °F (68 – 572°F)	11.5
Specific Heat Capacity Btu/ lb /°F at 68°F	0.09
Modulus of Elasticity in Tension ksi	15000
Modulus of Rigidity ksi	5600

FABRICATION PROPERTIES
Technique	Suitability
Soldering	Excellent
Brazing	Good
Oxyacetylene Welding	Not Recommended
Gas Shielded Arc Welding	Not Recommended
Coated Metal Arc Welding	Not Recommended
Spot Weld	Not Recommended
Seam Weld	Not Recommended
Butt Weld	Fair
Capacity for Being Cold Worked	Poor
Capacity for Being Hot Formed	Excellent
Forgeability Rating	100
Machinability Rating	80

Typical Uses

• Builders Hardware
• Building
• Consumer
• Electrical
• Industrial

Our Quality Policy

Our prime focus is to manufacture and supply only Quality copper alloys extrusions. To ensure quality, we adhere to all the standard compliance check and keep our quality standard updated with the help of progressive and sharing learning.

Metal Range

• Free Machining Brass
• Forging Brass
• Leaded Brass

Product Range

• Rods and Bars View Products
• Hollow View Products
• Sections & Profiles View Products
• Ingots View Products
• Billets View Products

Contact

If you require any further information, feel free to contact us.

Quick Contact

Subscribe to our mailting list for latest updates and new product launch.