Đầu Dò Phased Array Mảng Pha Kép Kiểm Tra ăn Mòn DLA

Trang chủ » đầu Dò Phased Array » Đầu Dò Phased Array Mảng Pha Kép Kiểm Tra ăn Mòn DLA

Có thể bạn quan tâm

Bỏ qua nội dung Đầu dò Phased Array mảng pha kép kiểm tra ăn mòn DLAĐầu dò Phased Array mảng pha kép kiểm tra ăn mòn DLA - Ảnh 2Đầu dò Phased Array mảng pha kép kiểm tra ăn mòn DLA - Ảnh 3Đầu dò Phased Array mảng pha kép kiểm tra ăn mòn DLA - Ảnh 4Đầu dò Phased Array mảng pha kép kiểm tra ăn mòn DLA - Ảnh 5Đầu dò Phased Array mảng pha kép kiểm tra ăn mòn DLA - Ảnh 6 Trang chủ / Hãng sản xuất / Olympus Đầu dò Phased Array mảng pha kép kiểm tra ăn mòn DLA

Đầu dò Dual Linear Array ™ để kiểm tra ăn mòn cung cấp nhiều ưu điểm so với đầu dò siêu âm thông thường. Giải pháp sử dụng đầu dò mảng kép giúp cải thiện năng suất thông qua các tính năng như độ phủ lớn hơn, tốc độ quét nhanh hơn, và hình ảnh C-scan với mật độ điểm dữ liệu tăng lên. Kỹ thuật pitch-catch được sử dụng cho phép tăng cường độ phân giải gần bề mặt và phát hiện pitting tốt hơn trong các ứng dụng khảo sát ăn mòn so với đầu dò PAUT tiêu chuẩn, tăng khả năng phát hiện các khuyết tật ăn mòn.

The new Dual Linear Array™ probe offers several advantages over conventional ultrasonic dual element transducers for corrosion survey applications. This phased array solution improves productivity through features such as larger beam coverage, faster scan speed, and C-scan imaging with increased data-point density. View in Olympus website (English).

Liên hệ nhận báo giá [contact-form-7 id="11055" title="Contact for Quote"] SKU: 7.5DL32-32X5-REX1 Danh mục: Kiểm tra ăn mòn, Olympus, Phased Array (PAUT) Thẻ: Đầu dò phased array kiểm tra ăn mòn, đầu dò phased array mảng biến tử kép, DLA, PAUT Chọn theo danh mục
  • Hãng sản xuất
    • Automation Dr. Nix
    • Blue Star E&E
    • Carestream
    • DR SYSTEMS
    • DRTECH
    • DÜRR NDT
    • Eclipse Scientific
    • EXTENDE
    • GUL
    • HJKIR
    • IDK
    • Innospection
    • iX Cameras
    • Jireh
    • Kyoung Do
    • LGC Standard
    • Marktec
    • MFE Enterprises
    • Microtek
    • MR Chemie
    • Olympus
    • Proceq
    • Rigaku
    • SPECTRO-UV
    • Talcyon
    • TOS
    • VAST
    • VeriPhase
    • YXLON
    • ZChem
  • Phương pháp
    • Chụp ảnh phóng xạ (RT)
      • Chỉ thị chất lượng ảnh
      • Chụp quét cắt lớp (CTE)
      • Ống phát tia X
      • Quét phim kỹ thuật số (CR)
      • Tấm cảm biến X-Quang kỹ thuật số (DR)
    • Điện từ trường (ET)
      • Dòng điện xoáy (ECT)
      • Dòng xoáy mảng pha (ECA)
      • SLOFEC
      • Từ trường dò (MFL)
    • Hạt từ tính (MT, MPI)
      • Cuộn dây từ hóa
      • Gông từ xách tay (Magnetic Yokes)
      • Hóa chất MT
      • Trạm kiểm tra từ
    • Hồng ngoại (IRT)
    • Huỳnh quang tia X (XRF)
    • Kiểm tra độ cứng
      • Ấn lõm
      • Bật nẩy
    • Nhiễu xạ tia X (XRD)
    • Phân tích rung động (VA)
    • Phát xạ âm
    • Quan sát hình ảnh (VT, RVI, HSV)
      • Kính hiển vi
    • Siêu âm (UT)
      • Cộng hưởng âm
      • Đầu dò Phased Array (PAUT)
      • Đầu dò siêu âm (UT)
      • FMC/TFM
      • Phản xạ xung âm (APR)
      • Phased Array (PAUT)
      • Phụ kiện siêu âm
      • Siêu âm đầu dò quay
      • TOFD
      • Từ giảo
    • Sóng dẫn hướng
    • Thẩm thấu lỏng (PT, LPI)
      • Hóa chất PT
      • Trạm kiểm tra thẩm thấu
    • Tự động
  • Ứng dụng
    • Đo chiều dày
      • Đo chiều dày chai nhựa
      • Đo chiều dày lớp phủ
    • Đo độ cứng
    • Đo độ dẫn điện
    • Giám định pháp y
    • Hệ thống giám sát
    • Hệ thống kiểm tra tự động
    • Khoáng vật học
    • Kiểm tra ăn mòn
    • Kiểm tra ăn mòn ứng suất nứt
    • Kiểm tra mối hàn
      • Kiểm tra mối hàn đa thành phần kim loại
    • Kiểm tra ở nhiệt độ cao
    • Kiểm tra pipeline
    • Kiểm tra vật đúc
    • Nghiên cứu và phát triển
    • Nội soi đo lường
    • Nội soi khuyết tật
    • Phát hiện bong tách
    • Phát hiện khuyết tật
    • PWHT
    • Quay video tốc độ cao
    • Sản phẩm tiêu dùng/RoHS
    • Scanner & phụ kiện
    • Tube testing
    • Xác nhận nhanh hợp kim (PMI)

Đầu dò Dual Linear Array ™ để kiểm tra ăn mòn cung cấp nhiều ưu điểm so với đầu dò siêu âm thông thường. Giải pháp sử dụng đầu dò mảng kép giúp cải thiện năng suất thông qua các tính năng như độ phủ lớn hơn, tốc độ quét nhanh hơn, và hình ảnh C-scan với mật độ điểm dữ liệu tăng lên. Kỹ thuật pitch-catch được sử dụng cho phép tăng cường độ phân giải gần bề mặt và phát hiện pitting tốt hơn trong các ứng dụng khảo sát ăn mòn so với đầu dò PAUT tiêu chuẩn, tăng khả năng phát hiện các khuyết tật ăn mòn khó kiểm tra.

Nhờ các tính năng mới như các lỗ tiếp nước trong nêm, đường kính thay đổi để có thể thích nghi tốt hơn với độ cong của ống, nêm có thể dễ dàng thay thế, hỗ trợ kiểm tra nhiệt độ cao, đầu dò ăn mòn của DLA bây giờ đã có thể được sử dụng để gắn trên những bộ quét thực hiện kiểm tra lập bản đồ ăn mòn tự động.

Lợi ích và tính năng của đầu dò DLA

  • Sử dụng các kết nối dây tiếp nhận xung (PR) tiên tiến hỗ trợ các định luật tiêu cự phức tạp

    • Phương pháp tập trung toàn phần (TFM)

    • Chụp ảnh đồng pha (PCI)*

  • Công nghệ Pitch-catch giúp giảm biên độ phản xạ bề ămtj để có độ phân giải bề mặt tối ưu

  • Khả năng phát tia được tối ưu hóa

  • Các tập tin luật tiêu cự tích hợp trên máy dò khuyết tật OmniScan™ X3

  • Phát huy tối đa khi sử dụng máy dò khuyết tật OmniScan X4 và OmniScan X3 64

  • Khả năng tương thích với các thiết bị có mô-đun PR

  • Tương thích với phần mềm kiểm tra và phân tích tiên tiến WeldSight™

  • Phát hiện các khuyết tật nông tới 1 mm (0,04 in.) dưới bề mặt

  • Phạm vi chùm âm rộng lên tới 30 mm (1,18 in.)

  • Độ sâu kiểm tra điển hình từ 1 đến 80 mm trong thép cacbon

  • Hệ thống điều chỉnh nhanh thích ứng với đường kính từ 4 inch đến phẳng

  • Nêm có thể thay thế, hệ thống dẫn nước tích hợp và chân chống mài mòn cacbua bền bỉ

*PCI chỉ khả dụng trên máy phát hiện lỗi OmniScan X3 64.

 

Các tính năng phần mềm OmniScan

Hình chiếu cạnh, chiếu bằng và chiếu đứng (B-scan, D-scan, C-scan).Tín hiệu A-scan có độ phân giải cao, không nén.Hai cổng có thể định cấu hình linh hoạt.Phân tích nhanh trên OmniScan hoặc trên máy tính sử dụng phần mềm OmniPC™.

Tính năng mới, khả năng mới

Sự kết hợp giữa đầu dò ăn mòn DLA và máy dò khuyết tật OmniScan SX là một lựa chọn kiểm tra hợp lý. Giải pháp này rất dễ cài đặt và đơn giản khi sử dụng: tải tập tin cài đặt được cung cấp, kiểm tra thông số hiệu chuẩn, sau đó có thể tiến hành công việc và lưu ghi dữ liệu.

Cho dù bạn muốn kiểm tra sử dụng bộ mã hóa hoặc thực hiện lập bản đồ ăn mòn tự động với MapROVER ™, đầu DLA cho phép bạn nhanh chóng và dễ dàng thực hiện quét C-Scan trên bề mặt nhẵn. Hệ thống giữ ổn định đầu dò sáng tạo kết hợp với nêm có thể tháo lắp và các tính năng cung cấp tiếp âm tự động hoạt động trên các đường ống có đường kính nhỏ từ 4 inch. Đầu dò ăn mòn DLA cũng có phiên bản nhiệt độ cao có khả năng kiểm tra các bề mặt lên tới 150 ° C (300 ° F).

Đầu dò ăn mòn DLA được sử dụng với máy quét MAPROVER để kiểm tra tự động.
Đầu dò ăn mòn DLA được sử dụng với máy quét MAPROVER để kiểm tra tự động.

Kỹ thuật Dual Array Pitch-Catch

Giống như thiết kế của các đầu dò UT biến tử kép, hai đầu dò mảng tuyến tính kết hợp các biến tử truyền và nhận riêng biệt gắn trên nêm và hơi nghiêng. Cấu hình này tạo ra các chùm âm có biên độ phản xạ bề mặt giảm đáng kể. Điều này dẫn độ phân giải bề mặt tăng lên, cung cấp khả năng phát hiện các khuyết tật quan trọng như pitting, creep, và HIC.

Phát-Thu

Phát-Thu

Xung-Vọng

Xung-Vọng

So với phased array pulse-echo, kỹ thuật pitch-catch tạo ra rất ít xung phản hồi bề mặt, giúp độ phân giải gần bề mặt tốt hơn.

  B-scan hình ảnh ăn mòn trên ống thép carbon.

B-scan hình ảnh ăn mòn trên ống thép carbon.

Kỹ thuật PE với nhiều vùng trắng biểu hiện tín hiệu bị mất

Kỹ thuật TR sử dụng DLA không có khoảng trắng

Kỹ thuật quét đa nhóm và đa góc

Đầu dò DLA có thể sử dụng ở chế độ quét đa nhóm và đa góc để xây dựng tín hiệu tốt hơn với các ứng dụng khó. Trên một đầu dò DLA sẽ cùng lúc sử dụng 3 nhóm phát theo các góc -10 độ, 0 độ và 10 độ. Tín hiệu cuối cùng sẽ là tín hiệu có được từ cả 3 góc độ khác nhau.

  • Kiểm tra tốt hơn các vùng với ăn mòn nhiều và ăn mòn pitting
  • Phân biệt dễ dàng giữa tách lớp hay ăn mòn
  • Phân biệt giữa HIC và pitting
  • Độ nhạy có thể để ở mức thấp mà vẫn thu được tín hiệu phản hồi tốt. Do vậy kết quả đánh giá kích thước chính xác hơn.
  • Có thể sử dụng đo đỉnh xung thay vì đo sườn
  • Thiết bị yêu cầu hỗ trợ quét nhiều nhóm (Omniscan MX2) và phải sử dụng TomoView để merge dữ liệu.
Kỹ thuật kiểm tra ăn mòn đa nhóm và đa góc với PAUT
Kỹ thuật kiểm tra ăn mòn đa nhóm và đa góc với PAUT
Hình ảnh C-Scan trước khi merge dữ liệu với tín hiệu BW bị mất và bão hòa
Hình ảnh C-Scan sau khi merge không còn BW loss và tín hiệu bão hòa
Merged DLA 3 groups – C và D-scan
Merged DLA 3 groups – C và D-scan

Mã đặt hàng các sản phẩm đầu dò siêu âm phased array Dual Linear

Part Number Item Number Tần số/Frequency (MHz) Số biến tử/Number of Elements Pitch (mm) Active Aperture (mm) Elevation (mm) Chiều dài cáp/Cable Length (m) Application
7.5DL32-32X5-REX1-P-2.5-OM-IHC-PR-RW Q3301867 7.5 Dual 32 1 32 5 2.5 Sử dụng với thiết bị hỗ trợ PR độc lập, giúp sử dụng hết tiềm năng của thiết bị trên các kỹ thuật mới như TFM và PCI.
7.5DL32-32X5-REX1-P-5-OM-IHC-PR-RW Q3302172 7.5 Dual 32 1 32 5 5 Sử dụng với thiết bị hỗ trợ PR độc lập, giúp sử dụng hết tiềm năng của thiết bị trên các kỹ thuật mới như TFM và PCI.
7.5DL32-32X5-REX1-P-2.5-OM-IHC-RW Q3300635 (bản không PR) 7.5 64 (2 × 32) 1 32 5 2.5 Thủ công/Manual
7.5DL32-32X5-ULT1-H150-2.5-OM-IHC-RW Q3300636 (bản không PR) 7.5 64 (2 × 32) 1 32 5 2.5 Thủ công – Chịu nhiệt độ cao/Manual high-temperature
7.5DL32-32X5-REX1-P-7.5-OM-IHC-RW Q3300649 (bản không PR) 7.5 64 (2 × 32) 1 32 5 7.5 Thủ công và tự động/Manual and automated
REX1-KIT-ACC Q3300541             it of accessories for REX1 Stabalizing ring
SREX1-KIT Q7200746             Kit of nine (9) Rexolite wedges compatible with REX1 IHC-RW DLA corrosion probe. Kit includes: One (1) flat wedge to cover from flat down to 24in OD plus eight (8) AOD wedges to cover the range from 24in OD down to 4.5in OD.
SREX1-0L Q7200729             Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0 Refracted Angle, Longitudinal Wave.

Mã đặt hàng nêm REX1

Material IDPart IDDescription
REX2-K-ENC1-64-5DEGQ7500224REX2 corrosion inspection kit for Manual inspection with included Mini-Wheel encoder or Semi-Automated inspection with the optional MapSCANNER. Includes one dual array probe (7.5DL64-64X5-REX2-P-7.5-OM-PR-RW), one small carriage with 4 non-magnetic wheels, one ENC1-AL-7.5-LM-MAG mini-wheel encoder, one SREX2 Flat wedge. Does not include irrigation part, ScanDeck, cable protective sleeve and encoders.
REX2-K-Manual-Yenc-64-5DEGQ7500222REX2 corrosion mapping scanner kit. Includes one dual array probe (7.5DL64-64X5-REX2-P-7.5-OM-PR-RW), one HydroFORM2 carriage with 4 magnetic wheels, one encoder for scan axis, a ScanDeck, irrigation parts, cable protection zipper sleeve, Flat wedge and 7.5m long encoder cable with Lemo connector compatible with current generation of OmniScan instruments. (Y-encoder? - this is the same description as above)
7.5DL64-64X5-REX2-P-7.5-OM-PR-RWQ3302584***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 7.5 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
REX2-K-Manual-64-5DEGQ7500221REX2 corrosion mapping scanner kit. Includes one dual array probe (7.5DL64-64X5-REX2-P-7.5-OM-PR-RW), one HydroFORM2 carriage with 4 magnetic wheels, one encoder for scan axis, a ScanDeck with clicker feature, irrigation parts, cable protection zipper sleeve, Flat wedge and 7.5m long encoder cable with Lemo connector compatible with current generation of OmniScan instruments.
7.5DL32-64X5-REX2-P-7.5-OM-PR-RWQ3302579***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 32 (X2) Elements, 64X5 mm Total Active Aperture, 2.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 7.5 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:64PR Phased Array Instruments or higher.
REX2-K-64-5DEGQ7500225REX2 corrosion inspection kit for Manual inspection with optional Mini-Wheel encoder or Semi-Automated inspection with the optional MapSCANNER. Includes one dual array probe (7.5DL64-64X5-REX2-P-7.5-OM-PR-RW), one small carriage with 4 non-magnetic wheels, one SREX2 Flat wedge. Does not include irrigation part, ScanDeck, cable protective sleeve and encoders.
REX2-K-AUT-64-5DEG-30mQ750022330m REX2 corrosion mapping scanner kit for automated inspection. Includes one dual array probe (7.5DL64-64X5-REX2-P-30-OM-PR-RW), one HydroFORM2 carriage with 4 non-magnetic wheels, irrigation parts, one SREX2 Flat wedge. Does not include ScanDeck, cable protective sleeve and encoders.
7.5DL64-64X5-REX2-P-30-OM-PR-RWQ3302587***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 30 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL64-64X5-REX2-P-15-OM-PR-RWQ3302586***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 15 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL64-64X5-REX2-P-10-OM-PR-RWQ3302585***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 10 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL64-64X5-REX2-P-5-OM-PR-RWQ3302583***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 5 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL64-64X5-REX2-P-2.5-OM-PR-RWQ3302582***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 2.5 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL32-64X5-REX2-P-30-OM-PR-RWQ3302581***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 32 (X2) Elements, 64X5 mm Total Active Aperture, 2.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 30 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:64PR Phased Array Instruments or higher.
7.5DL32-64X5-REX2-P-15-OM-PR-RWQ3302580***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 32 (X2) Elements, 64X5 mm Total Active Aperture, 2.00 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 15 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:64PR Phased Array Instruments or higher.
7.5DL64-64X5-1DEG-REX2-P-30-OM-PR-RWQ3302578***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 30 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL64-64X5-1DEG-REX2-P-15-OM-PR-RWQ3302577***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 15 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL64-64X5-1DEG-REX2-P-7.5-OM-PR-RWQ3302576***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 64 (X2) Elements, 64X5 mm Total Active Aperture, 1.00 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 7.5 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:128PR Phased Array Instruments.
7.5DL32-64X5-1DEG-REX2-P-30-OM-PR-RWQ3302575***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 32 (X2) Elements, 64X5 mm Total Active Aperture, 2.00 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 30 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:64PR Phased Array Instruments or higher.
7.5DL32-64X5-1DEG-REX2-P-15-OM-PR-RWQ3302574***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 32 (X2) Elements, 64X5 mm Total Active Aperture, 2.00 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 15 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:64PR Phased Array Instruments or higher.
7.5DL32-64X5-1DEG-REX2-P-7.5-OM-PR-RWQ3302573***NOTE: Requires a HydroFORM2 carriage to be used. Refer to "Rex2-K" part numbers if the customer does not own a HydroFORM2***. Standard Phased Array Probe, 7.5MHz, Dual Linear Array, 32 (X2) Elements, 64X5 mm Total Active Aperture, 2.00 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, REX2 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 7.5 Meter Cable Length, Omniscan Connector Type. Removable Wedge. Compatible with XX:64PR Phased Array Instruments or higher.
7.5DL32-32X5-REX1-Q3301867Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, Removable Wedge, and Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software.
7.5DL32-32X5-REX1-Q3302173Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, Removable Wedge, and Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software.
10DL64-32X5-1DEG-REX1-P-2.5-OM-HC-PRQ3301737Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring, Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge. WEDGE IS NOT REPLACEABLE
10DL64-32X5-5DEG-REX1-P-2.5-OM-HC-PRQ3301733Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 5 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring,Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
7.5DL64-32X5-REX1-P-5-OM-IHC-PR-RWQ3302320Custom Phased Array Probe, 7.5 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software.
5DL32-32X5-REX1-P-Q3302195Standard Phased Array Probe, 5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Apertures, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, Removable Wedge, and Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software.
7.5DL32-32X5-REX1-Q3302172Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, Removable Wedge, and Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software.
5DL32-32X5-REX1-P-Q3302028Standard Phased Array Probe, 5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge
7.5DL32-32X5-REX1-P-5-OM-HCQ3300058Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5.0 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
7.5DL32-32X5-REX1-P-2.5-OM-HCQ3300057Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
7.5DL32-32X5-REX1-P-5-OM-IHC-RWQ3301174Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
5DL32-32X4-REX1-P-15-OM-IHC-PR-RWQ3302501Custom Phased Array Probe, 5MHz, Dual Linear Array, 32 (X2) Elements, 32X4 mm Total Active Aperture, 1.00 mm Pitch, 4 mm Elevation, REX1 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 15 Meter Cable Length, Omniscan Connector Type. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even compatible with instruments with wiring for PR modules only.
10DL64-32X5-1DEG-REX1-P-10-OM-IHC-PR-RWQ3302380Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 10 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X5-1DEG-REX1-P-7.5-OM-IHC-PR-RWQ3302379Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X5-1DEG-REX1-P-5-OM-IHC-PR-RWQ3302378Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X5-1DEG-REX1-P-2.5-OM-IHC-PR-RWQ3302377Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1-Degree Roof Angle Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X5-REX1-P-10-OM-IHC-PR-RWQ3302376Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X5-REX1-P-7.5-OM-IHC-PR-RWQ3302375Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 5-Degree Roof Angle Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 10 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
7.5DL32-32X5-REX1-M-2.5-OM-IHC-RWQ3302358Custom Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, Removable Wedge. Compatible with WeldSight Software.
7.5DL32-32X5-REX1-M-5-OM-IHC-RWQ3302316Custom Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, Metal Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge
10DL64-32X5-REX1-PQ3302218Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
7.5DL32-32X5-REX1-Q3302029Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Tyco Zero Interface Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7DL32-32X5-REX1-P-Q3301914Custom Phased Array Probe, 7 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes and Carbide Wear Face Adjustable Ring, Wiring for PR Modules, Removeable Wedge, and Manufactured for EN Compliance. Manufactured for EN Compliance. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software.
REX1-KIT-WASHQ3301869Kit of (3x) ABS Washers for REX1 Case Style
5DL32-32X5-REX1-P-7.5-OM-IHC-PR-RWQ3302308Standard Phased Array Probe, 5.0 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments with wiring for PR modules only.
10DL64-32X5-REX1-P-5-OM-IHC-PR-RWQ3302291Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL32-32X5-REX1-P-5-OM-IHC-RWQ3301779Phased Array Probe, 10 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes and Carbide Wear Face Adjustable Ring and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X4-REX1-P-2.5-OM-HCQ3300168Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x4 mm Total Active Aperture, 0.5 mm Pitch, 4 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge. WEDGE IS NOT REPLACEABLE
10DL64-32X5-REX1-P-2.5-OM-IHC-RWQ3301417Custom Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation Holes, Scanner Holes and Carbide Wear Face Adjustable Ring and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X5-1DEG-REX1-P-10-OM-HC-PRQ3301740Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 10 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring, Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge. WEDGE IS NOT REPLACEABLE
10DL64-32X5-1DEG-REX1-P-7.5-OM-HC-PRQ3301739Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring, Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge. WEDGE IS NOT REPLACEABLE
10DL64-32X5-1DEG-REX1-P-5-OM-HC-PRQ3301738Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 1 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring, Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge. WEDGE IS NOT REPLACEABLE
10DL64-32X5-5DEG-REX1-P-10-OM-HC-PRQ3301736Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 5 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 10 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring, Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge. WEDGE IS NOT REPLACEABLE
10DL64-32X5-5DEG-REX1-P-7.5-OM-HC-PRQ3301735Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 5 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring, Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
10DL64-32X5-5DEG-REX1-P-5-OM-HC-PRQ3301734Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 5 Degree Roof Angle, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring, Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.WEDGE IS NOT REPLACEABLE
7.5DL32-32X5-REX1-P-2.5-HY-IHC-RWQ3301451Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Hypertronics Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
3.5DL32-32X5-REX1-P-5-OM-IHC-RWQ3301272Standard Phased Array Probe, 3.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-15-OM-IHC-RWQ3301134Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 15 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-2.5-ZTZ-IHCQ3301466Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Tyco Zero Interface Connector. Includes Irrigation, Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
10DL32-32X5-REX1-P-2.5-OM-IHC-RWQ3301465Phased Array Probe, 10 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes and Carbide Wear Face Adjustable Ring and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge.
2DL32-32X5-REX1-P-2.5-OM-IHC-RWQ7201086Custom Phased Array Probe, 2.0 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
5DL32-32X5-REX1-P-2.5-OM-IHC-RWQ3301217Standard Phased Array Probe, 5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-31-OM-IHC-RWQ3301192Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 31 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-10-OM-IHC-RWQ3301175Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 10 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
1.5DL32-32X5-REX1-P-2.5-OM-HCQ3300921Standard Phased Array Probe, 1.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
7.5DL32-32X5-REX1-P-20-OM-IHC-RWQ3300783Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 20m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-1.6-OM-IHC-RWQ3300752Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 1.6 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
5DL32-32X5-REX1-P-30-OM-IHC-RWQ3300658Standard Phased Array Probe, 5.0 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 30 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-30-OM-IHC-RWQ3300657Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 30 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
5DL32-32X5-REX1-P-7.5-OM-IHC-RWQ3300650Standard Phased Array Probe, 5.0 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-7.5-OM-IHC-RWQ3300649Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 7.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
7.5DL32-32X5-REX1-P-2.5-OM-IHC-RWQ3300635Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Irrigation, Scanner Holes, Carbide Wear Face Adjustable Ring, and Removable Wedge. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability.
5DL32-32X5-REX1-P-30-OM-HCQ3300620Custom Phased Array Probe, 5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 30 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
REX1-KIT-ACCQ3300541REX1-KIT-ACC: kit of accessories for REX1 Stabalizing ring
7.5DL32-32X5-REX1-P-30-OM-HCQ3300480Custom Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 30 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
7.5DL32-32X5-REX1-P-15-OM-HCQ3300479Custom Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 15 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring.Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
5DL32-32X5-REX1-P-2.5-OM-HCQ3300336Standard Phased Array Probe, 5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
7.5DL32-32X5-REX1-P-10-OM-HCQ3300059Standard Phased Array Probe, 7.5 MHz, Dual 32 Element Arrays, 32x5 mm Total Active Aperture, 1.0 mm Pitch, 5 mm Elevation, Integrated Rexolite Delay Line, Case Type 1, PVC Sheathing, 10 m Cable Length, Omniscan Connector. Includes Scanner Holes and Carbide Wear Face Adjustable Ring. Wired Odd/Even (1-2,3-4 etc) compatible with instruments without a Pulser/Receiver module or integrated Pulser/Receiver capability. WEDGE IS NOT REPLACEABLE
SREX2-0L-AOD4.5Q7203665Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
REX1 RAIL KITQ7790208REX1 kit including rails, screws and carbides
SREX2-0L-AOD6.625Q7203667Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
CARBIDE WEAR PINS for REX1 CASE TYPEQ6900030Kit of (12x) carbide wear pins for REX1 case style.
PLASTIC WEAR PINS for REX1 CASE TYPEQ3300352Kit of (12x) plastic wear pins for REX1 case style
SREX2-0L-AOD8.625Q7203668Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD60Q7203676Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 48 inches (1219.2 mm) to 60 inches (1524 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD48Q7203675Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 36 inches (914.4 mm) to 48 inches (1219.2 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD36Q7203674Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 30 inches (762 mm) to 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD30Q7203673Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 24 inches (609.6 mm) to 30 inches (762 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD24Q7203672Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 16 inches (406.4 mm) to 24 inches (609.6 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD16Q7203671Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD12.75Q7203670Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD10.75Q7203669Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0L-AOD5.563Q7203666Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection in the circumferential direction.
SREX2-0LQ7203664Standard Rexolite Wedge for REX2 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave.
SREX1-0L-AOD26Q7203475Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 26 inches (660.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD24Q7200737Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 16 inches (406.4 mm) to 24 inches (609.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
10DL64-32X5-5DEG-RQ3302030Standard Phased Array Probe, 10 MHz, Dual 64 Element Arrays, 32x5 mm Total Active Aperture, 0.5 mm Pitch, 5 mm Elevation, 5 Degree Roof Angle for thickness range from 4 to 30mm, Integrated Rexolite Delay Line, Case Type REX1, PVC Sheathing, 2.5 m Cable Length, Tyco Zero Interface Connector. Includes Scanner Holes, Carbide Wear Face Adjustable Ring. Wired for use on instruments with pulser/receiver modules. Compatible with WeldSight Software. Note: Although all 10 MHz Dual Linear Array probes are manufactured with 10 MHz piezo-composite, the tested center frequency specification of the REX1 models shifts down to approximately 9.0 MHz because of attenuation occurring in the integrated wedge. WEDGE IS NOT REPLACEABLE
SREX1-0L-AOD12.75Q7200735Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
SREX1-0L-AOD8.625Q7200733Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
SREX1-0LQ7200729Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave.
SREX1-0L-AOD1.9Q7202060Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 1.9 inches (48.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SCREW KIT FOR DLAQ7790198Kit of (12x) Screws and Retaining washers for ULT1 and REX1 Removable Wedge (RW) probes
SREX1-0L-AOD48Q7202830Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0 Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 48 inches (1219 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD42Q7202829Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0 Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 42 inches (1066.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD36Q7202828Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0 Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 36 inches (127 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AID6Q7202639Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0 Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 6 inches (152.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AID26.5Q7202361Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0 Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 26.5 inches (673.1 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AID15.21Q7202323Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0 Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 15.21 inches (386.334 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
STABILIZATION RINGQ3302101Replacement Ring Assembly for REX1 probes. Kit contains Lever, Dowel Pin, Washer, Plate Pivot, Plate carbide support, Screws, Wear Plate and Carbides.
SREX1-0L-AID4Q7203135Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching 4 inches (101.6 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
SREX1-0L-AID30Q3301891Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 30 inches (762 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD5Q7202063Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 5 inches (127 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD2.875Q7202062Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 2.875 inches (73.025 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD2.375Q7202061Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 2.375 inches (60.325 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD1.315Q7202059Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 1.315 inches (33.401 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD4Q7201569Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching 4 inches (101.6 mm) Axial Outside Diameter (AOD) for circumferential inspection of corrosion on pipes NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD3.5Q7201568Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching 3.5 inches (88.9 mm) Axial Outside Diameter (AOD) for circumferential inspection of corrosion on pipesNOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD3.25Q7201567Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching 3.25 inches (82.55 mm) Axial Outside Diameter (AOD) for circumferential inspection of corrosion on pipes NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD2.75Q7201566Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching 2.75 inches (69.85 mm) Axial Outside Diameter (AOD) for circumferential inspection of corrosion on pipes NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD2.5Q7201565Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching 2.5 inches (63.5 mm) Axial Outside Diameter (AOD) for circumferential inspection of corrosion on pipes. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD2.25Q7201564Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching 2.25 inches (57.15 mm) Axial Outside Diameter (AOD) for circumferential inspection of corrosion on pipes. NOTE: This wedge is not compatible with the stabilization ring
SREX1-0L-AOD1.5Q7201169Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 1.5 inches (38.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring.
SREX1-0L-AID2.6Q7201155Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 2.6 inches (66 mm) to 3 inches (76.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
SREX1-0L-AOD3Q7201117Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 3 inches (76.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring.
SREX1-0L-AOD2Q7201116Custom Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 2 inches (50.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. NOTE: This wedge is not compatible with the stabilization ring
SREX1-KITQ7200746Kit of nine (9) Rexolite wedges compatible with REX1 IHC-RW DLA corrosion probe. Kit includes: One (1) flat wedge to cover from flat down to 24in OD plus eight (8) AOD wedges to cover the range from 24in OD down to 4.5in OD.
SREX1-0L-AOD16Q7200736Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
SREX1-0L-AOD10.75Q7200734Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
SREX1-0L-AOD6.625Q7200732Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
SREX1-0L-AOD5.563Q7200731Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
SREX1-0L-AOD4.5Q7200730Standard Rexolite Wedge for REX1 IHC-RW Dual Linear Array Corrosion Probe, 0° Refracted Angle, Longitudinal Wave. The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
SCREW KIT M3 X 22.5 (MKIX1639)Q3300555Kit of (10x) SCRW-10416; M3 X 22.5 (MKIX1639), HexHead Screw for REX1 Stabilizing Ring

Tải file liên quan

Có tất cả 2 file, kích thước 1,3 MiB với 3.006 lượt tải trong mục DLA PROBE.

Hiển thị từ 1 tới 2 trong tổng số 2 file.

DLA PROBE

Catalog đầu dò DLA» 1,2 MiB - 1.679 hits - 1 Tháng 1, 2020Catalog đầu dò DLA

Cấu hình cài đặt sẵn cho đầu dò DLA trên OmniScan MX2/SX» 143,3 KiB - 1.327 hits - 1 Tháng 1, 2020Các file cấu hình cài đặt sẵn để sử dụng với các khoảng hội tụ khác nhau. Giúp cài đặt nhanh.

Có thể bạn thích…

Thiết bị siêu âm Phased Array nhỏ gọn OmniScan SX Xem nhanh

Siêu âm Phased Array nhỏ gọn OmniScan SX

NEW Thiết bị siêu âm Phased Array và TFM OmniScan X3 Xem nhanh

Thiết bị siêu âm Phased Array và TFM OmniScan X3

Sản phẩm tương tự

Thiết bị siêu âm Phased Array OmniScan MX2 Xem nhanh

Thiết bị Siêu âm Phased Array OmniScan MX2

Hệ thống kiểm tra thanh kim loại (BIS-PA) Xem nhanh

Hệ thống kiểm tra thanh kim loại (BIS-PA)

Các giải pháp kiểm tra ống tự động Xem nhanh

Các giải pháp kiểm tra ống tự động

Kiểm tra ống HDPE sử dụng Phased Array Xem nhanh

Nêm Polymer tiếp âm khô sử dụng trong siêu âm (Dry Couplant Material)

Hệ thống kiểm tra phôi kim loại quay tự động (RBIS) Xem nhanh

Hệ thống kiểm tra phôi kim loại quay tự động (RBIS)

Thiết bị siêu âm sử dụng trong dây truyền tự động FOCUS PX Xem nhanh

Thiết bị FOCUS PX / PC / SDK kiểm tra Phased Array tích hợp trên dây truyền sản xuất

Bộ quét siêu âm tự động có thể thay đổi hướng SteerROVER Xem nhanh

Bộ quét siêu âm tự động có thể thay đổi hướng SteerROVER

Khối mẫu chuẩn để hiệu chuẩn thiết bị kiểm tra siêu âm Xem nhanh

Mẫu chuẩn và mẫu tham chiếu siêu âm

  • Sản phẩm
    • Hãng sản xuất
      • Automation Dr. Nix
      • Blue Star E&E
      • DR SYSTEMS
      • MR Chemie
      • IDK
      • iX Cameras
      • Jireh
      • MFE Enterprises
      • Olympus
      • SPECTRO-UV
      • Talcyon
      • ZChem
    • Phương pháp
      • Chụp ảnh phóng xạ (RT, CR, DR)
      • Dòng điện xoáy (ET, ECT, ECA)
      • Huỳnh quang tia X (XRF)
      • Nhiễu xạ tia X (XRD)
      • Phân tích rung động (VA)
      • Phát xạ âm (AE)
      • Quan sát hình ảnh (VT, RVI)
      • Siêu âm (UT, AUT, PAUT, ToFD, TFM, IRIS)
      • Sóng dẫn hướng (GWT)
      • Thẩm thấu lỏng (PT)
      • Từ tính (MT)
      • Tự động hóa
    • Dùng cho
      • Phát hiện bong tách
      • Phát hiện khuyết tật
      • Đo độ cứng
      • Tube testing
      • Kiểm tra ăn mòn
      • Kiểm tra mối hàn
      • Kiểm tra pipeline
      • Kiểm tra vật đúc
      • Đo chiều dày
      • Đo chiều dày chai nhựa
      • Đo chiều dày lớp phủ
    • Dùng cho
      • Xác nhận nhanh hợp kim (PMI)
      • Nghiên cứu và phát triển
      • Quay video tốc độ cao
      • Giám định pháp y
      • Sản phẩm tiêu dùng/RoHS
      • Khoáng vật học
      • Nội soi khuyết tật
      • Nội soi đo lường
      • Kiểm tra ăn mòn ứng suất nứt
      • Đo độ dẫn điện
      • Kiểm tra ở nhiệt độ cao
  • Ứng dụng
  • Hỗ trợ
    • Dịch vụ
      • Đào tạo NDT
      • Tư vấn bậc 3 về NDT
      • Hiệu chuẩn thiết bị
      • Sửa chữa thiết bị
      • Cho thuê thiết bị
      • Thiết bị NDT cũ
    • Học NDT
      • Thuật ngữ
      • Tiêu chuẩn và các chỉ dẫn kỹ thuật
      • Kiến thức và Hướng dẫn
      • Diễn đàn VISCO
      • Tường thuật
    • Tải về
      • Phần mềm
      • Catalog
      • Hướng dẫn
      • Video
  • Blog
  • Liên hệ
  • Giới thiệu
  • Tuyển dụng
  • FAQ
  • Site map
  • Portal
  • Đăng nhập

Từ khóa » đầu Dò Phased Array