Error Codes > Toshiba > E-Studio 350 > Code C010 - PrintCopy .info

Trang chủ » C010 » Error Codes > Toshiba > E-Studio 350 > Code C010 - PrintCopy .info

Có thể bạn quan tâm

Toshiba e-Studio 350 All About this machine Error Code: All codes C010 C040 C130 C140 C150 C160 C180 C1A0 C1B0 C260 C270 C280 C410 C440 C450 C470 C480 C490 C550, C780 C570 C580 C730 C810 C820 C830 C940 C970 CA10 CA20 CB20 CB30 CB40 CB50 CB60 CB80 CB90 CBA0 CBB0 CBC0 CBD0 CBE0 CBF0 CC00 CC10 CC20 CC30 CC40 CC50 CC60 CC80 CC90 CCA0 CCB0 CCD0 CCE0 CCF0 CDF0 CE00 E010 E020 E030 E090 E110 E120 E130 E140 E150 E160 E190 E200 E210 E220 E300 E310 E320 E330 E340 E350 E360 E3C0 E3D0 E3E0 E400 E410 E420 E430 E440 E450 E480 E490 E491 E510 E520 E550 E711 E712 E713 E714 E721 E722 E723 E724 E725 E726 E731 E741 E742 E743 E860 E870 E910 E920 E930 E940 E950 E951 E960 E961 E9F0 EA10 EA20 EA30 EA40 EA50 EA60 EA70 EA80 EA90 EAA0 EAB0 EAC0 EAD0 EAE0 EAF0 EB30 EB50 EB60 F070 F090 F091 F092 F100 F101 F102 F103 F104 F105 F106 F107 F108 F110 F111 F120
  • Code: C010
  • Description: Main motor abnormality: The main motor is not rotating normally.
  • Remedy: Is the main motor working? (Perform the output check in the test mode: 03-101/151) NO 1. Check if the connector CN1 of the main motor is disconnected. 2. Check if the connector CN318 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor patterns on the main motor board and LGC board are short- or open-circuited. 5. Replace the main motor. 6. Replace the LGC board. YES Is the LED on the main motor board lit without flickering? NO 1. Check if the connector pins are disconnected and the harnesses are opencircuited. 2. Check if the conductor patterns on the main motor board and LGC board are short- or open-circuited. 3. Replace the main motor. 4. Replace the LGC board. YES 1. Check if the PLL lock signal CN318-A1 output from the LGC board is always level “L”? 2. Check if the voltage supplied to the CPU input terminal IC24-14 is always “L”? 3. Replace the LGC board.
Used for the following models 6
  • Toshiba e-Studio 350
  • Toshiba e-Studio 352
  • Toshiba e-Studio 353
  • Toshiba e-Studio 450
  • Toshiba e-Studio 452
  • Toshiba e-Studio 453
Error Code
Parts Catalog
Service Mode, Troubleshooting
Downloads Files
Home
Email:
Password:
Sign In
New Register Forgot Password?
Send message to us

Từ khóa » C010