Error Codes > Toshiba > E-Studio 455 > Code C010 - PrintCopy .info

Trang chủ » C010 » Error Codes > Toshiba > E-Studio 455 > Code C010 - PrintCopy .info

Có thể bạn quan tâm

Toshiba e-Studio 455 All About this machine Error Code: All codes C010 C040 C130 C140 C150 C160 C180 C1A0 C1B0 C260 C270 C280 C3D0 C3D1 C3D2 C410 C430 C440 C450 C4C0 C550 C551 C570 C580 C5A0 C8E0 C940 C970 CA10 CA20 CB00 CB01 CB10 CB11 CB12 CB20 CB30 CB31 CB40 CB50 CB51 CB60 CB80 CB81 CB90 CBA0 CBB0 CBC0 CBD0 CBE0 CBF0 CC00 CC10 CC20 CC30 CC31 CC40 CC41 CC50 CC51 CC52 CC60 CC61 CC71 CC72 CC80 CC90 CCB0 CCD0 CCE0 CCF0 CCF1 CDC0 CDD0 CDE0 CDF0 CE00 CE50 CE90 CF10 E010 E020 E030 E061 E062 E063 E064 E065 E090 E110 E120 E130 E140 E150 E160 E190 E200 E210 E220 E270 E280 E300 E310 E320 E330 E340 E350 E360 E3C0 E3D0 E3E0 E410 E420 E430 E440 E450 E480 E490 E491 E510 E520 E550 E570 E580 E712 E714 E721 E722 E724 E725 E731 E860 E870 E871 E910 E920 E930 E940 E950 E951 E960 E961 E9F0 EA10 EA20 EA21 EA22 EA23 EA24 EA25 EA26 EA27 EA28 EA29 EA30 EA31 EA32 EA40 EA50 EA60 EA70 EA80 EA90 EAA0 EAB0 EAC0 EAD0 EAE0 EB30 EB50 EB60 ED10 ED11 ED12 ED13 ED14 ED15 ED16 F070 F090 F100 F101 F102 F103 F104 F105 F106 F107 F108 F110 F111 F120 F130 F200 F350 F400
  • Code: C010
  • Description: Main motor abnormality: The main motor is not rotating normally
  • Remedy: Is the main motor working? (Perform the output check in the test mode: 03-101/151) NO 1. Check if the connector CN1 of the main motor is disconnected. 2. Check if the connector CN308 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor patterns on the main motor board and LGC board are short circuited or open circuited. 5. Replace the main motor. 6. Replace the LGC board. YES Are there any damage or scratches on the main motor board? NO 1. Check if the connector pins are disconnected and the harnesses are open circuited. 2. Check if the conductor patterns on the main motor board and LGC board are short circuited or open circuited. 3. Replace the main motor. 4. Replace the LGC board. YES 1. Check if the PLL lock signal CN308-8 output from the LGC board is always level “L”? 2. Check if the voltage supplied to the CPU input terminal IC22-98 is always “L”? 3. Replace the LGC board.
Used for the following models 5
  • Toshiba e-Studio 205L
  • Toshiba e-Studio 255
  • Toshiba e-Studio 305
  • Toshiba e-Studio 355
  • Toshiba e-Studio 455
Error Code
Parts Catalog
Service Mode, Troubleshooting
Downloads Files
Home
Email:
Password:
Sign In
New Register Forgot Password?
Send message to us

Từ khóa » C010