G269 Fault Code - MK5 Golf GTI

Welcome, Guest. Please login or register.Did you miss your activation email? January 01, 2026, 10:30:50 pm News:

• Home
• Forum
• Mods
  • Modifications Catalogue
  • Detailing Catalogue
• Login
• Register

Search

• MK5 Golf GTI »
• Forum »
• All Things Mk5 »
• Mk5 General Area »
• G269 fault code

« previous next »

• Print

Pages: [1] Go Down

Author Topic: G269 fault code (Read 3802 times)

Neiltdi

• Always Involved
• 
• Thank You
• -Given: 14
• -Receive: 8
• Posts: 210
• Full Hex+CAN
• • 

G269 fault code

« on: February 21, 2019, 09:09:22 pm » Hi guys long time!I have a 2008 edition 30, it had standard shocks and springs with eibach lowering springs I replaced all shocks and springs with genuine parts now the orange steering light is on with fault code g269, I have tried doing the basic settings with vag com, light goes out drive and it’s perfect, turn engine off cycle ignition and light comes back on ?Surely the rack hasn’t buggered from doing this job ? Any help would be great !Thanks Logged Full Hex+CAN in Hampshire.

willni

• Guest

Re: G269 fault code

« Reply #1 on: February 21, 2019, 09:52:55 pm » If you have access to VCDs I'd follow Ross-Techs advice before doing anything else.00573 - Steering Torque Sensor (G269)00573 - Steering Torque Sensor (G269): Implausible SignalPossible SymptomsSteering Assist not workingPossible CausesSteering Assist Power Supply (Terminal 15) faultyWiring/Connectors from/to Steering Torque Sensor (G269) faultySteering Torque Sensor (G269) faultyPossible SolutionsCheck Steering Assist Power Supply (Terminal 15)Check Fuse(s)Check Wiring/Connectors from/to Steering Torque Sensor (G269)Check Steering Torque Sensor (G269)Special NotesWhen found in VW Golf (1K) Steering Assist (and similar), check Steering Torque Sensor (G269)Checking Steering Torque Sensor (G269)Prerequisites:Ignition ONEngine ON (Idle)System voltage at least 11.0 V.[Select][44 - Steering Assist][Meas. Blocks - 08]Group 001[Go!]Field 2: Steering Torque Sensor (G269)Turn the Steering Wheel multiple times completely to the left and right. The Torque Values should change.If the Torque Values do change, it's most likely an intermittent Fault in the Wiring/Connectors.If the Torque Values do NOT change, the Sensor itself or the Power Supply (Terminal 15) might be faulty.Group 004[Go!]Field 2: Power Supply (Terminal 15), Specification: "Term. 15 ON"[Done, Go Back][Close Controller, Go Back - 06] Logged

MIJ_JAGGER

• Won't Shut up.
• 
• Thank You
• -Given: 103
• -Receive: 78
• Posts: 765

Re: G269 fault code

« Reply #2 on: February 22, 2019, 12:37:07 am » Happened on mine, it’s the rack Logged

• Print

Pages: [1] Go Up « previous next »

• MK5 Golf GTI »
• Forum »
• All Things Mk5 »
• Mk5 General Area »
• G269 fault code

• SMF 2.0.18 | SMF © 2021, Simple MachinesSimple Audio Video Embedder
• Flagrant by Crip
• XHTML
• RSS
• WAP2

Page created in 0.811 seconds with 28 queries.