G41 And G42 How Are Works ? - CNC Zone

Trang chủ » G41 E G42 Cnc » G41 And G42 How Are Works ? - CNC Zone

Có thể bạn quan tâm

CNCzone.com IndustryArena.com 595,583 members Register Log in My CNCzone Login Remember Me?
  • Advanced Search
  • Home
  • CNCzone®
  • Forum
  • Machine Controllers Software and Solutions
  • G-Code Programing
  • G41 and G42 How are works ?
Page 1 of 2 12 Next LastLast
  • Jump to page:
Results 1 to 20 of 26 Thread: G41 and G42 How are works ?
  • Thread Tools
    • Show Printable Version
    • Email this Page…
    • Subscribe to this Thread…
    • Display all images
  • Search Thread
    • Advanced Search
  1. 07-24-2003, 03:52 AM #1 bunalmis
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    bunalmis is offline Registered bunalmis's Avatar Join Date Jul 2003 Location Turkey Posts 246 Downloads0 Uploads0

    Default G41 and G42 How are works ?

    Hello, I am learning G codes but I didnt understand the G41, G42. Who can teach to me these commands by example? Bulent UNALMISSimilar Threads:
    • DB9 Pin Out That Actually Works?
    • Cam Works TechDB help to tweek to parts non native to Solid Works
    • MPG only works sometimes
    • Need Help!- Only Y works correct X don't work Z works one direction only
    • It works!!!!
    Reply with Quote Reply with Quote
  2. 07-24-2003, 04:08 AM #2 Klox
    • View Profile
    • View Forum Posts
    • Private Message
    • View Gallery Uploads
    Klox is offline Registered Klox's Avatar Join Date Mar 2003 Location NZ Posts 507 Downloads0 Uploads0

    Default

    It's offsets from the program line. When you're cuttining in a straight line (G01) is G41 offset to the left of the program line and G42 offset to the right of the program line. You must use D in conjunction with the G41 & G42 as the D value sets the amount of the offset. Eg: G41 G01 X10.0 Y25.0 D0.15, this translates to a offset of 0.15mm to the left of the program line. Am I clear? If not Pm me and i'll e-mail you an example of a program. Klox
    *** KloX *** I'm lazy, I'm only "sparking" when the EDM is running....
    Reply with Quote Reply with Quote
  3. 07-24-2003, 04:21 AM #3 bunalmis
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    bunalmis is offline Registered bunalmis's Avatar Join Date Jul 2003 Location Turkey Posts 246 Downloads0 Uploads0

    Default Re: G41 and G42 How are works ?

    Thanks Klox, I add 2 examples. May you said which motion must use G41 or G42 ? (Arrow numbers show sequence of motion)
    Attached Thumbnails Attached Thumbnails G41 and G42 How are works ?-g41-42-jpg Reply with Quote Reply with Quote
  4. 07-24-2003, 01:29 PM #4 CAMmando
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    CAMmando is offline Registered CAMmando's Avatar Join Date May 2003 Location Phila PA, USA Posts 146 Downloads0 Uploads0

    Default

    Usually ..... A = G41 B = G42 But nothing would prevent a user from using them in reverse (in fact I worked in a shop that did just that). The operator just would put negative comp values in the register rather than positive and vice versa.
    Wee aim to please ... You aim to ... PLEASE.
    Reply with Quote Reply with Quote
  5. 07-24-2003, 01:45 PM #5 Mortek
    • View Profile
    • View Forum Posts
    • Private Message
    • View Gallery Uploads
    Mortek is offline Registered Join Date Mar 2003 Location Utah Posts 214 Downloads0 Uploads0

    Default

    In most fanuc based controls the D references a Diameter or radius entered into a registry page in the control. Hence if you called G41 D1 it would reference a pre-entered diameter or radius in register 1. Same goes for height offsets where you would call G43 H1 and that would select Height offset 1.
    Reply with Quote Reply with Quote
  6. 07-24-2003, 07:37 PM #6 cadcam
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    cadcam is offline Member cadcam's Avatar Join Date Apr 2003 Location United States Posts 3578 Downloads0 Uploads0

    Default

    Mortek , Most of the time Fanuc like to have a diffrent D value so more like T1 H1 G41 D21. hope this helps just extra things to know.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
    Reply with Quote Reply with Quote
  7. 07-24-2003, 08:23 PM #7 JamesBond
    • View Profile
    • View Forum Posts
    • Private Message
    • View Gallery Uploads
    JamesBond is offline 007 Member JamesBond's Avatar Join Date May 2003 Location USA Posts 18 Downloads0 Uploads0

    Default

    Also an important thing to remember when manually programming G41/G42 is that before your cut, you need to enable the G41/G42 with a move that is at least 1/2 the cutter diameter. This also goes for turning off cutter comp with a G40. You might get some unexpected results if you try to turn cutter comp on with your first cut. -JamesBond
    Experience is the name every one gives to their mistakes.
    Reply with Quote Reply with Quote
  8. 07-24-2003, 08:29 PM #8 wms
    • View Profile
    • View Forum Posts
    • View Gallery Uploads
    wms is offline Member wms's Avatar Join Date Mar 2003 Location wyoming Posts 928 Downloads0 Uploads0

    Default

    Originally posted by cadcam Mortek , Most of the time Fanuc like to have a diffrent D value so more like T1 H1 G41 D21. hope this helps just extra things to know. Cadcam, I have to kindly disagree with your statment that most Fanuc or fanuc like controls like different number from your tool number. I use the same offset as the tool number, have for about 15 years, never seen any problem. You can use a different offset number, if you want to leave extra material, say for a finish pass. So if you are using tool #1 that is a 1/2 mill, you could set offset #1 to .500 and use offset #21, set at .505 to leave .0025 material for clean up.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply with Quote Reply with Quote
  9. 07-24-2003, 10:03 PM #9 HuFlungDung
    • View Profile
    • View Forum Posts
    • Private Message
    • View Gallery Uploads
    HuFlungDung is offline Member HuFlungDung's Avatar Join Date Mar 2003 Location Canada Posts 4826 Downloads0 Uploads0

    Default

    Originally posted by JamesBond Also an important thing to remember when manually programming G41/G42 is that before your cut, you need to enable the G41/G42 with a move that is at least 1/2 the cutter diameter. This also goes for turning off cutter comp with a G40. You might get some unexpected results if you try to turn cutter comp on with your first cut. -JamesBond Good point, James. BTW, for the uninitiated, this is what we machinists refer to as "an approach", that extra bit of toolpath that we add onto the actual part toolpath, to give the machine a chance to apply cutter compensation without forcing the tool into the wall of the part (gouging we call it), before the machine can figure out which side of the path it is supposed to be on. The reason the machine doesn't know how to apply compensation from a standstill, is that left and right are meaningless until a move is made down a path. In other words, there is no left or right to a starting point, but there is left or right to a starting movement. A lot of this depends on how smart your controller is. If it can "look ahead" in your program before executing any movement, it may be able to apply compensation quite intelligently. Nonetheless, at minimum, the machine is going to have to move your commanded amount from your compensation table before it is on path. Whether it makes this move all by itself when it reads a G41/G42, or combines it with the first linear/circular) movement, it has to do something to get the cutter in position. This is why the first entity in your path must be either "in the waste", or "in the clear".
    Reply with Quote Reply with Quote
  10. 07-24-2003, 10:44 PM #10 hardmill
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    hardmill is offline Registered hardmill's Avatar Join Date Mar 2003 Location United States Posts 499 Downloads0 Uploads0

    Default

    Originally posted by wms Cadcam, I have to kindly disagree with your statment that most Fanuc or fanuc like controls like different number from your tool number. I use the same offset as the tool number, have for about 15 years, never seen any problem. You can use a different offset number, if you want to leave extra material, say for a finish pass. So if you are using tool #1 that is a 1/2 mill, you could set offset #1 to .500 and use offset #21, set at .505 to leave .0025 material for clean up. Sorry Wms, I have to dissagree also. Fanuc controls are actually 50/50 in regards to using the same offsett. As far as multi passes for finish thats what our cadcams are for. JM2C PEACE
    Reply with Quote Reply with Quote
  11. 07-24-2003, 10:59 PM #11 wms
    • View Profile
    • View Forum Posts
    • View Gallery Uploads
    wms is offline Member wms's Avatar Join Date Mar 2003 Location wyoming Posts 928 Downloads0 Uploads0

    Default

    Originally posted by hardmill Sorry Wms, I have to dissagree also. Fanuc controls are actually 50/50 in regards to using the same offsett. As far as multi passes for finish thats what our cadcams are for. JM2C PEACE So maybe the word "most" should be "Some" or even "half". I too agree that the cad/cam will handle the finish stuff. I was just giving an example of how different offset number and values could be used.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply with Quote Reply with Quote
  12. 07-24-2003, 11:23 PM #12 cadcam
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    cadcam is offline Member cadcam's Avatar Join Date Apr 2003 Location United States Posts 3578 Downloads0 Uploads0

    Default

    I know that not all fanuc controls do it this way. But at least half would be a btter statment from me. As the last few years that most of the controls the customers keep telling me that they have to add 20 to the D value and that it can not be the same. I know that the Yasda 5axis that has a Fanuc 16i control does not have to have a diffrent D as I have mentioned. But most of the older ones do like the OM, 6M and many more have it this way. So I have to do this again today and say I am sorry for a over statment.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) Cadcam Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .
    Reply with Quote Reply with Quote
  13. 07-24-2003, 11:36 PM #13 wms
    • View Profile
    • View Forum Posts
    • View Gallery Uploads
    wms is offline Member wms's Avatar Join Date Mar 2003 Location wyoming Posts 928 Downloads0 Uploads0

    Default Me tooo!

    Cadcam, Hardmill, And I will have to say that I too am sorry for over (or under) stating what I said. As I have not been exposed to controls that require what you are talking about. Now we are all even and can start fresh.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply with Quote Reply with Quote
  14. 07-24-2003, 11:40 PM #14 CAMmando
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    CAMmando is offline Registered CAMmando's Avatar Join Date May 2003 Location Phila PA, USA Posts 146 Downloads0 Uploads0

    Default

    I have to kindly disagree with your statment that most Fanuc or fanuc like controls like different number from your tool number. The point is Alot of Fanuc (and other controls use the same "bank" of registers for H and D comp numbers. On these machines by definition either the H or the D can have the same number NOT both. It is customary to use T1 H1 D31 or 41 or 51 etc. We have 1 control that has completely separate registers for D and H. On that machine T1 H1 D1 is OK. Just to clarify ... Regarding moves or leadins to apply comp. The statement that 1/2 the tool diameter is required is not completely accurate. You need enough of a move to apply the amount of comp in the register. You need at least the value in the comp register as a leadin. If the program is written to part dimensions then yes you need 1/2 the cutter. If the program is written to cutter centerline (wear comp) you only need enough leadin for the amount of comp expected. I usually allow .03-.05 for regrinds.
    Wee aim to please ... You aim to ... PLEASE.
    Reply with Quote Reply with Quote
  15. 08-05-2003, 02:35 AM #15 Paul_S
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    Paul_S is offline Member Paul_S's Avatar Join Date Mar 2003 Location Mira Loma, California Posts 156 Downloads0 Uploads0

    Default D word is modal

    In Milling when the D word is needed for tool comp. I place the D word for the tool in the same block as the fixture offset and tool length offset. For example: G0G90G40G80T1M6(tool change) G54X-0.28Y-1.28Z1.G43H1D1(call offsets and first position) S4000M3(turn on spindle) M8(turn of flood coolant) G4P2000(2000 millisecond, i.e. 2 second dwell for spindle) (notice only 1.00 above part.) Z-0.28 (rapide to cut depth or Z0.1, next block G1Z-0.28) G1G41X0F30. (comp into part dim, a 1/2 cutter was .25 + .03 clear) Y0.03(part 1.00 wide, 0.03 off part) G0G40X-0.28(turn off comp off part, tool radius + .03) Z1.M5(clear part, turn off spindle) G49H0Z0D0M9(cancel all offsets & coolant.) To cancel the tool length offset ether the G49 or H0 will do. The G40 canceled the D1, but the D0 clears the D word. The G41 was offset to the left for climb cut. Use G42 offset to the right for conventional cutting or left hand cutters climb cutting. Since the G0 G90 G40 G80 are usually already set and are model, the tool change block can just be: T1 M6 But different machines with their controls may dictate certain formats or sequinces for T word and M6 calls. The Fadal format does not use the G43, G49 or the D word. The H word is used for both tool length and tool comp.
    Last edited by Paul_S; 08-05-2003 at 02:48 AM.
    Safety - Quality - Production.
    Reply with Quote Reply with Quote
  16. 08-05-2003, 08:03 PM #16 kbcnc
    • View Profile
    • View Forum Posts
    • Private Message
    • View Gallery Uploads
    kbcnc is offline Registered Join Date Mar 2003 Location NW Ohio Posts 3 Downloads0 Uploads0

    Default

    The Fadal format does not use the G43, G49 or the D word. The H word is used for both tool length and tool comp. This is true if your Fadal is set up to operate in Format 1 only! If your Fadal is set-up for Format 2 operation, then you must use the "D" work to invoke cutter compensation. Example: M6T3 (.5 cutter) M3S2500 G0G90X-.25Y-.35E1 H3D3Z.5M8 (D3 must be here so control can read Tool Dia. Offset Page!!!) G0Z-.1 G1G41X0Y-.35F10. Y1. .... ....
    Reply with Quote Reply with Quote
  17. 08-05-2003, 10:21 PM #17 Rekd
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    Rekd is offline Registered Rekd's Avatar Join Date Apr 2003 Location teh Debug Window Posts 1876 Downloads0 Uploads0

    Default

    The H word is used for both tool length and tool comp. Actually, the D is optional in Format 1... 'Rekd teh .02
    Reply with Quote Reply with Quote
  18. 08-05-2003, 10:37 PM #18 ARB
    • View Profile
    • View Forum Posts
    • Private Message
    • View Gallery Uploads
    ARB is offline Registered ARB's Avatar Join Date Jul 2003 Location Granville,NY Posts 31 Downloads0 Uploads0

    Default

    The Bottom line is that Cutter Comp is one of the more powerful tools when it comes to programming. It will be your friend when you master it. I would sugest writing some simple programs and experiment with G41 And G42 until you are comfortable with how they work on the controls that you are using. This is one of the more critical concepts to master and when you do your whole CNC experience will be better. Next up. Unlock the power of Sub Programs.
    ARB "That Will Be a dollar for the work and a dollar for knowing how" FB
    Reply with Quote Reply with Quote
  19. 08-05-2003, 10:40 PM #19 rob2424
    • View Profile
    • View Forum Posts
    • Private Message
    • View Gallery Uploads
    rob2424 is offline Registered Join Date May 2003 Posts 20 Downloads0 Uploads0

    Default

    wms using a 1/2 endmill would you not enter the radius of the cutter into the d offset which would be say .255 for roughing and.250 for finishing when you are applying g41 or g42.
    Reply with Quote Reply with Quote
  20. 08-05-2003, 10:59 PM #20 Rekd
    • View Profile
    • View Forum Posts
    • Private Message
    • Visit Homepage
    • View Gallery Uploads
    Rekd is offline Registered Rekd's Avatar Join Date Apr 2003 Location teh Debug Window Posts 1876 Downloads0 Uploads0

    Default

    Depends on the way the CRC is set up in the controller. It can be either set on Dia or on Rad, on Rad, yes, .25 for a 1/2" EM, on dia, .500 for 1/2" EM. Why the difference? Preference mostly, but a bit of application. For instance, I use DIA because it gives me more control over the amount of CRC I can use, (well, when speaking of .0001 anyway.. ). 'Rekd
    Matt San Diego, Ca ___ o o o_ [l_,[_____], l---L - □lllllll□- ( )_) ( )_)--)_) (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply with Quote Reply with Quote
Page 1 of 2 12 Next LastLast
  • Jump to page:
Quick Navigation G-Code Programing Top
  • Site Areas
  • Settings
  • Private Messages
  • Subscriptions
  • Who's Online
  • Search Forums
  • Forums Home
  • Forums
  • CNCzone.com Policies / FAQ
    1. CNCzone's Community Policies
    2. CNCzone.com FAQ
  • Events, Product Announcements Etc
    1. News Announcements
    2. Trade Shows / Webinars / Other Events
    3. Polls
    4. Videos
    5. Want To Buy...Need help!
    6. For Sale Only
  • Community Club House
    1. International / Regional Forums
      1. Australia, New Zealand Club House
      2. Brazilian Club House
      3. Canadian Club House
      4. European Club House
        1. French
        2. German
        3. Italian
        4. Norwegian
        5. Spanish
        6. United Kingdom
      5. Mexican Club House
      6. South Africa Club House
      7. USA Club House
    2. Mentors & Apprentice Locator
    3. Education - Teachers and Students Hangout
    4. Complaints and Praise Discussions
    5. Environmental / Alternate Energy
    6. Computer Technology
      1. USB, RS232, PARALLEL etc
      2. Computers / Desktops / Networking
  • Employment Opportunity / RFQ (Request for Quote).
    1. Manufacture Company Listing
    2. Employment Opportunity
    3. RFQ (Request for Quote)
      1. North America RFQ's
      2. EUROPE RFQ's
      3. RFQ Feedback
  • Machinery Manual, Brochure / Photo Archives
    1. Machinery Manuals / Brochures
    2. Member / Shop Photos
  • CAM Software
    1. Uncategorised CAM Discussion
    2. ArtCam Pro
    3. Alphacam
    4. Autodesk CAM
      1. Autodesk Post Processors
    5. BobCad-Cam
      1. BobCAM for SolidWorks™
      2. BobCad Post Processors
      3. Tutorials
    6. CamWorks
    7. CamBam
    8. CutLeader
    9. Dolphin CAD/CAM
    10. EdgeCam
    11. Esprit
    12. EnRoute
    13. EZ-CAM Solutions
    14. FeatureCAM CAD/CAM
    15. GibbsCAM
    16. Hypermill
    17. Mastercam
      1. Post Processors for MC
    18. MadCAM
    19. OneCNC
    20. PTC Pro/Manufacture
    21. PowerMILL
    22. Postprocessor for CAM
    23. Rhinocam
    24. SprutCAM
    25. SheetCam
      1. Post Processor Files
    26. Surfcam
    27. SolidCAM for SolidWorks and SolidCAM for Inventor
    28. UG NX
    29. Visual Mill
    30. Vectric
      1. Aspire
      2. Cut2D / Cut3D
      3. PhotoVCarve and VCarve Pro
      4. Post Processors
    31. ZW3D CAM
  • CAD Software
    1. Uncategorised CAD Discussion
    2. Autodesk
    3. Logic Trace CNC/DXF
    4. Rhino 3D
    5. Solidworks
    6. ViaCad / Shark
  • Mechanical Engineering
    1. Epoxy Granite
    2. Linear and Rotary Motion
    3. Mechanical Calculations/Engineering Design
    4. T-Slot CNC building
  • WoodWorking
    1. WoodWorking Topics
  • WoodWorking Machines
    1. Uncategorised WoodWorking Machines
    2. CNC Machining Centers
    3. Commercial CNC Wood Routers
      1. Biesse
      2. Blue Elephant CNC
        1. Blue Elephant Hot Products
      3. Camaster
      4. Chinese Machines
      5. DynaCNC
      6. Excitech routers
      7. Gerber
      8. Gorilla CNC Machines
      9. K2CNC
      10. Larken
      11. Multicam Machines
      12. Omni CNC
      13. Roctech CNC Routers
      14. Shopsabre
      15. Stepcraft
      16. Techno CNC
      17. XYZ Gantry Routers
    4. DIY CNC Router Table Machines
      1. FAQ of DIY CNC Machine Building
      2. Avid CNC
      3. CNC Wood Router Project Log
      4. FineLine Automation
      5. Joes CNC Model 2006
      6. Momus Design CNC plans
      7. Open Source CNC Machine Designs
      8. Zen Toolworks
    5. Wood Lathes / Mills
  • MetalWorking
    1. MetalWork Discussion
    2. Bending, Forging, Extrusion...
    3. Casting Metals
    4. Diemaking / Diecutting
    5. Mass finishing equipment/media/strategies
    6. Moldmaking
    7. Welding Brazing Soldering Sealing
    8. 80/20 TSLOTS / Other Aluminum Framing Systems
  • MetalWorking Machines
    1. Uncategorised MetalWorking Machines
      1. Vertical Mill, Lathe Project Log
    2. Bending- and Punching Machines
    3. Auto Tool Changer
    4. Drilling- and Milling Machines
    5. Benchtop Machines
      1. Taig Mills / Lathes
      2. X3/SX3/G0619/G0463
      3. RF-45 Clone Mill
      4. Mini Lathe
    6. Turning Machines
    7. Bridgeport Machines
      1. Bridgeport / Romi Lathes
      2. Bridgeport / Hardinge Mills
    8. Cincinnati CNC
    9. CNC Swiss Screw Machines
      1. CITIZEN Machines
    10. Colchester Tornado lathes
    11. CNC "do-it-yourself"
    12. Daewoo/Doosan
    13. CNC Machining Centres
    14. Deckel, Maho, Aciera, Abene Mills
    15. Dyna Mechtronics
    16. EMCO CNC Machines
      1. EMCO Lathe
      2. EMCO Mills
    17. Fadal
    18. Haas Machines
      1. Haas Lathes
      2. Haas Mills
        1. Haas Visual Quick Code
    19. Hardinge Lathes
    20. Harrison Alpha
    21. Hitachi Seikis
    22. HURCO
    23. Hyundai Kia
    24. Kitamura
    25. Knee Vertical Mills
    26. Mikinimech
    27. Milltronics
    28. Mori Seiki Machines
      1. Mori Seiki lathes
      2. Mori Seiki Mills
    29. Novakon
    30. OKK
    31. Okuma
    32. Sharp CNC
    33. Shopmaster/Shoptask
    34. Smithy
    35. South Bend Machinery
    36. Syil Products
    37. Tormach Personal CNC Mill
      1. Tormach Slant Lathe
      2. Tormach PathPilot™
    38. Toyoda
    39. Tree
  • Manufacturing Processes
    1. Milling
    2. Turning
    3. Drilling
    4. Grinding
    5. Chucking and Measuring
    6. Other Manufacturing Processes
    7. Safety Zone
  • CNC Plasma, EDM / Waterjet Machines
    1. Waterjet General Topics
    2. CNC Plasma / Oxy Fuel Cutting Machines
    3. EDM Discussion General Topics
    4. Plasma, EDM / Other similar machine Project Log
    5. Bulltear Industries
    6. DynaTorch
    7. PlasmaCam
    8. Hypertherm Plasma
    9. Torchmate
  • Laser Engraving and Cutting Machines
    1. Laser Engraving / Cutting Machine General Topics
    2. Commercial Laser
      1. AEON Laser
      2. BODOR Laser
      3. BOSS Laser
      4. G.Weike Laser
      5. Hurricane Laser
      6. LOGILASE Laser
      7. Redsail Laser
      8. Thunder Laser
    3. Fiber Laser Cutting Topics
    4. Laser Control Software
      1. LaserCut
    5. Laser Hardware
      1. Laser CO2 Tubes, Diodes, RF and Power Supplies
  • P2X4A
    1. Power-to-X-for-Applications
  • Other Machines
    1. Other Machine Topics
    2. CNC Wire Foam Cutter Machines
    3. Digitizing and Laser Digitizing
    4. Engraving Machines
    5. Machine Created Art
    6. Printing, Scanners, Vinyl cutting and Plotters
    7. PCB milling
    8. Commercial Products / Manufacturers Support Forums
      1. Automation Technology Products
      2. Bulltear Industries Support Forum
      3. Charter Oak Automation Support Forum
      4. CNC4PC
  • Maintenance in General
    1. Maintenance DIY Discussion
      1. BallScrew Repair
    2. SERVICE FOR CNC-MACHINES
  • CNC Electronics
    1. CNC Machine Related Electronics
    2. DeskCNC Controller Board
    3. Dmm Technology
    4. Gecko Drives
      1. G-REX
    5. Hobbycnc (Products)
    6. Phase Converters
    7. Leadshine
    8. PIC Programing / Design
    9. Rutex Products
      1. Servo Drives
    10. Servo Motors / Drives
    11. SmoothStepper Motion Control
    12. Stepper Motors / Drives
    13. Spindles / VFD
    14. UHU Servo Controllers
    15. Viper Servo drives
    16. Xylotex
  • Machine Controllers Software and Solutions
    1. CNC (Mill / Lathe) Control Software (NC)
    2. Centroid CNC Control Products
    3. Bosch Rexroth
    4. CamSoft Products
    5. Controller Cards
    6. Controller & Computer Solutions
    7. Dynapath
    8. Dynomotion/Kflop/Kanalog
    9. EdingCNC
    10. CNC-EDITOR
    11. CS-Lab CNC Products
    12. LinuxCNC (formerly EMC2)
    13. Deckel / Dialog
    14. FlashCut CNC
    15. Fagor Automation
    16. Mori Seiki Software
    17. Mazak, Mitsubishi, Mazatrol
    18. Fanuc
    19. G-Code Programing
      1. Parametric Programing
    20. Mach Software (ArtSoft software)
      1. Mach Wizards, Macros, & Addons
      2. Machines running Mach Software
      3. Mach Lathe
      4. Mach Mill
      5. Mach Plasma / Laser
      6. Mach 4
      7. Screen Layouts, Post Processors & Misc
    21. Fidia
    22. DNC Problems and Solutions
    23. Mitsubishi controls
    24. NCPlot G-Code editor / backplotter
    25. SIEMENS Sinumerik CNC controls
      1. SIEMENS -> GENERAL
      2. SIEMENS -> Sinumerik 802D/808D/810D/828D/840D
      3. SIEMENS -> Sinumerik 810M/810T
      4. SIEMENS -> Sinumerik 840C
      5. SIEMENS -> ShopMill
      6. SIEMENS -> ShopTurn
      7. SIEMENS -> SinuTrain
    26. UCCNC Control Software
    27. PlanetCNC
    28. HEIDENHAIN
      1. HEIDENHAIN -> GENERIC
      2. HEIDENHAIN -> MillPlus
      3. HEIDENHAIN -> iTNC530 PC-SOFTWARE
      4. HEIDENHAIN -> ManualPlus / CNC Pilot
      5. HEIDENHAIN -> TNC
    29. Index and Traub
    30. Visual Basic
    31. WinCnc
    32. Okuma
    33. Philips
  • OpenSource CNC Design Center
    1. Opensource Forum Rules
    2. Arduino
    3. Coding
    4. OpenSource Software
    5. Open Source Controller Boards
  • Engraving / Art Design Software
    1. Jewelry Design Software
  • SignMaking
    1. Signmaking Topics
    2. Portfolio Board
  • Additive Manufacturing / 3D Printers and 3D Scanners
    1. 3D Printer / 3D Scanner Discussion
    2. 3D Printing / Scanning Software and Hardware
    3. Electronics
  • Material Technology
    1. Material Machining Solutions
    2. Composites, Exotic Metals etc
    3. Glass, Plastic and Stone
    4. Vacuum forming, Thermoforming etc
    5. Metallurgy
    6. Plastic injection
    7. Hard / High Speed Machining
  • Tools / Tooling Technology
    1. Calibration / Measurement
    2. CNC Tooling
    3. Metalworking- / Woodworking Tooling / Manual Machining
    4. Work Fixtures / Hold-Down Solutions
    5. Toolgrinding / Toolgrinding Machines
  • Hobby Projects
    1. Hobby Discussion
    2. Wooden Clocks
    3. Gunsmithing
    4. I.C. Engines
    5. Musical Instrument Design and Construction
    6. RC Robotics and Autonomous Robots
« Previous Thread | Next Thread »
  • Home
  • CNCzone®
  • Forum
  • Machine Controllers Software and Solutions
  • G-Code Programing
  • G41 and G42 How are works ?

Tags for this Thread

can, codes, comma, commands, didn, didnt, example, g codes, g41, g42, hello, hese, ing, learning, teach, understand, works

View Tag Cloud

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  • BB code is On
  • Smilies are On
  • [IMG] code is On
  • [VIDEO] code is On
  • HTML code is Off

Forum Rules

-- Default Style -- Default Mobile

About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Quick Links

  • My User CP
  • Advertising Rates
  • Site Support
  • Imprint

Follow us on

All times are GMT -4. The time now is 05:36 PM. All CNCzone.com Content - Copyright © 2019 - All Rights Reserved CNC Machines,CAD/CAM,Milling Machines,Lathes,Classifieds, Lasers,Engraving,woodworking,MetalWorking,Industrial Equipment, Manufacturing technolgies

Our Brands

G41 and G42 How are works ? G41 and G42 How are works ?

Từ khóa » G41 E G42 Cnc