Information In The VIGOtec Ecosystem - Don's Laser Things

Trang chủ » Vigo Engraver L7 Alternative » Information In The VIGOtec Ecosystem - Don's Laser Things

Có thể bạn quan tâm

INSTRUCTIONS:

Check out the new MoBeam posts! To find K40 conversion information use the "INDEX", "SEARCH" or "LABELS" sections in the sidebar.

Friday, July 16, 2021

Information in the VIGOtec ecosystem

About the VG-L7X

https://youtu.be/sx9myDtrNhYPurchased here:https://usa.banggood.com/New-VIGOTEC-VG-L7X-20W-Laser-Engraver-CNC-Router-Desktop-Automatic-DIY-Cutter-Laser-Engraving-Machine-Printer-For-Windows-Wifi-Connection-With-SD-Card-Banggood-Exclusive-p-1708879.html?rmmds=myorder&cur_warehouse=USA&ID=521036

VIGOtec VG-L7X (wifi)

http://vigotec.cn/Getting StartedVigoWorks Software ManualVigoWorks for AndroidUser ManualVigoEngraverL7_Software_Installation_Manual_v2.3_Eng.pdf

Assembly

https://youtu.be/VE23gm1n65s

What's On the SD card

The unit comes with a USB SD card reader.On the SD card which came with the machine and was plugged into the controller is a Gcode file:
  • sd_default.nc
Seems the VG-L7X runs on real gcode :). [yes but a proprietary version of GrBL]
sd_default.nc file

Videos

https://youtu.be/oiToBrs8V5E

VigoTec Stuff on GitHub

Welcome to the Vigotech VG-L7X wiki!

Custom Firmware upload

https://github.com/arkypita/Vigotech-VG-L7X/tree/main/CustomFirmware-VG-L7x

Flashing ESP

https://github.com/arkypita/Vigotech-VG-L7X/tree/main/Firmware
  • Copy of original firmware
  • Instructions on copying the resident firmware using esptool

Issues:

https://github.com/arkypita/LaserGRBL/issues/1123

Maker Forums

https://forum.makerforums.info/t/vigotec-vg-l7-bx20/79893/18This is only for the L7, not the VG-L7XFinally figured my L7 out I think. Opened the “Read This” note in the software and it says to use the basic firmware when you want to use other software. I naturally installed the latest when I set mine up.SO. I went back and installed the ‘basic’ and low and behold LB is running. So here is the ‘note’ and good luck to you all!**4.If you have other control software and want to use it, please upload the standard grbl firmware named ‘Standard_Grbl_1.1f.hex’. Or if you have the appropriate firmware just for the control software, upload it! If you want to use other engraving machine control software, please update the firmware of the engraving machine motherboard to general firmware. **

Upload Instructions for Standard Vigotec

  • Open www.vigotec.cn 7
  • Download file VG-L7 laser engraver
  • Open file and extract all
  • (Read the “ReadMe important” file, it has all explaind).
  • Open "driver_and_upload_tools file.
  • Open “Xloader” file
  • On “Hex file” open “Standard_Grbl_v1.1f.hex” file
  • On “device” select “Uno…”
  • Select the port you have
  • And “baud rate” must have “115200”
  • Upload!!!
  • Takes some time. When uploaded it must be ready to use any laser software (except the original vigotec).
https://forum.makerforums.info/t/vigotec-vg-l7-bx20/79893/40?u=donkjr

Laser Diode Head

SanWu Model BG20W https://www.sanwulasers.com/----------Enjoy,Comments are always welcome.Please, consider using the donate button on the sidebar if you found this post valuable!Don Posted by at 9:23:00 AM Labels: Laser Diode, MoBeam, VigoTec L-7x

No comments:

Post a Comment

Newer Post Older Post Home Subscribe to: Post Comments (Atom)

NEW! Laser Diode Engraver Posts

Looking for Laser Diode Engraver Help & Info? Enter "MoBeam" in search bar below!

Donate to help fund more projects!

Disclaimer

The author does not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on this site is strictly at your own risk, and the author will not be held liable for any losses and damages in connection with the use of this information.

Parts Kits

For part kits that are associated with posts in my blog click here: https://kit.co/donkjr

As an Amazon Associate I earn from qualifying purchases

Search This Blog

Featured Post

Click Here for the Index To K40 Conversion

Converting and Improving a K40 I have invested an inordinate amount of time converting my K40 to a better cutting and engraving tool. Thi...

Labels

Analog Meter (1) CAM: G & M Coding (2) Digital Pot Position (1) Electronics (1) K40 (2) K40 A Index (1) K40 AC Power System (1) K40 Air Assist (3) K40 Air Systems (3) K40 Cabinet Modifications (3) K40 Cables and connectors (1) K40 Control Panel (6) K40 Coolant Pump (1) K40 Cooling (4) K40 Current Calibration Pot (3) K40 Day One Changes (1) K40 DC Power (1) K40 Design Tool Chain (1) K40 Electrical Noise (1) K40 Exhaust (1) K40 Gantry (1) K40 GLCD Display (1) K40 Interlocks (2) K40 Laser Power Meter (3) K40 Laser Power Supply (14) K40 Laser Response Tst (2) K40 Laser Tube (7) K40 Lenses (1) K40 Lift Table (3) K40 Middleman (2) K40 Motors (1) K40 Optical Endstops (2) K40 Optics (10) K40 PWM Control (5) K40 Schematics (1) K40 Sensors (2) K40 Smoothie Configuration (1) K40 Stock (1) K40 Testing (1) L7X (2) Laser Diode (7) Laser Power Meter (1) LaserWeb/CNCpro (1) Lens (1) LPS (1) MoBeam (13) MobileBeam (3) shop (1) VigoTec L-7x (5)

Blog Archive

  • ▼  21 (22)
    • ▼  Jul (2)
      • VG-L7X
      • Information in the VIGOtec ecosystem

About Me

DonKJr View my complete profile

License

Creative Commons LicenseThis work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Từ khóa » Vigo Engraver L7 Alternative