Lidl HG06337 Control Via MQTT - Zigbee2MQTT

GuideGuide

• Getting started
• Supported Adapters
• Supported Devices
• Installation
• Configuration
• Usage
• FAQ

DevicesAdvancedAdvanced

• Zigbee

  • Zigbee network
  • Improve network range and stability
  • Secure your Zigbee network
  • Sniff Zigbee traffic
  • Create a CC2530 router

• Support new devices

  • Support new devices
  • Support new Tuya devices
  • Find Tuya Data Points

• Remote Adapter

  • Connect to a remote adapter
  • Connect to a remote Sonoff ZBBridge

• More

  • 3D cases
  • External converters
  • External extensions
  • Switch to the dev branch
  • Get Tuya and Xiaomi OTA url

SupportSupport

• Forum
• Discord
• Issues
• Donate

GitHubGitHub (docs)Lidl HG06337

Model	HG06337
Vendor	Lidl
Description	Silvercrest smart plug (EU, CH, FR, BS, DK)
Exposes	switch (state), power_on_behavior, indicator_mode
Picture

Notes

Pairing

Perform a factory reset by holding down the switch on the plug continuously for 5 seconds. The LED will start blinking and the device will enter pairing mode.

Options

How to use device type specific configuration

• state_action: State actions will also be published as 'action' when true (default false). The value must be true or false

Exposes

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

On with timed off

When setting the state to ON, it might be possible to specify an automatic shutoff after a certain amount of time. To do this add an additional property on_time to the payload which is the time in seconds the state should remain on. Additionally an off_wait_time property can be added to the payload to specify the cooldown time in seconds when the switch will not answer to other on with timed off commands. Support depends on the switch firmware. Some devices might require both on_time and off_wait_time to work Examples : {"state" : "ON", "on_time": 300}, {"state" : "ON", "on_time": 300, "off_wait_time": 120}.

Power-on behavior (enum)

Controls the behavior when the device is powered on after power loss. Value can be found in the published state on the power_on_behavior property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"power_on_behavior": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"power_on_behavior": NEW_VALUE}. The possible values are: off, previous, on.

Indicator mode (enum)

LED indicator mode. Value can be found in the published state on the indicator_mode property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"indicator_mode": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"indicator_mode": NEW_VALUE}. The possible values are: off, off/on, on/off, on.