LR-XN10 - Separate Amplifier Model, Amplifier Units Expansion Unit ...

T0501391

Digital CMOS Laser Sensor

LR-X series

Catalogues View Catalogue

• Overview
• Specs
• Models
• Downloads
• Price

1. Home
2. Products
3. Sensors
4. Photoelectric Sensors
5. Digital CMOS Laser Sensor
6. Models
7. Separate Amplifier Model, Amplifier Units Expansion unit (Zero Line Type)

Separate Amplifier Model, Amplifier Units Expansion unit (Zero Line Type) LR-XN10

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

• View Catalogue
• Data Sheet (PDF)

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

Dimensions

Software

• 
• 

UL standard / CSA standard conformity

Specifications

Model				LR-XN10
Type				—
Cable/connector
Main Unit/Expansion Unit				Expansion Unit
No. of Control Outputs				None*1
No. of External Inputs				—
Response Time				500 μs*2/1 ms/3 ms/10 ms/200 ms Selectable
IO-Link				—
Function	Timer Function			Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
Input/Output	Control Output			—
	External Input
Unit Expansion				Up to 8 expansion units possible (including main unit, a total of 9 units connected)However, up to 16-unit expansion is possible when the LR-XN10 is used for expansion with the NU Series.
Protection Circuit				Protection against reverse power connection, protection against output overcurrent,protection against output surge, protection against reverse output connection
Number of Interference Prevention Devices				OFF/4 units/8 units selectable*3
Power supply	Power voltage			16 to 30 VDC*4 (including 10% ripple (P-P) or less), class 2
	Power consumption			During normal operation: 1060 mW (44 mA or less at 24 V, 61 mA or less at 16 V), ECO ON/ALL: 895 mW (37 mA or less at 24 V, 50 mA or less at 16 V)
Environmental resistance	Ambient temperature			−20 to +55°C (no freezing)*5
	Relative humidity			35 to 85% RH (no condensation)
	Vibration resistance			10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz; X, Y, and Z directions
	Shock resistance			500 m/s2 (50G); 3 times each for X, Y, and Z axes
Case Material				Main Unit and Cover: Polycarbonate
Accessories				Instruction manual
Weight				Approx. 21 g
*1 This counts as 1 output when expanding with multiple units to the FS-MC8N/MC8P and NU Series.*2 If 500 μs is selected, the following limitations apply.· Only 2-point calibration can be performed.· The detection range masking is set during calibration. (Manual setting of the masking range is not supported.)· Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used.· The interference prevention function is not supported*3 Selecting four or eight interference prevention units causes the response time to change as follows: 4 Units selected: 6 ms/18 ms/60 ms/1.2 s selectable; 8 Units selected: 12 ms/36 ms/120 ms/2.4 s selectable.*4 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher.*5 Expansion by 1 or 2 units: −20 to +55°C; Expansion by 3 to 10 units: -20 to +50°C, Expansion by 11 to 16 units: -20 to +45°C

Scroll

Data Sheet (PDF) Other Models

View Catalogue

Downloads:

• Technical Guides
• Data Sheet (PDF)
• CAD Data
• Manuals
• Software

For Your Support:

• Ask KEYENCE
• Experience Demo / Test
• Free Trial Unit

Products Lineup:

• Photoelectric Sensors

1. Home
2. Products
3. Sensors
4. Photoelectric Sensors
5. Digital CMOS Laser Sensor
6. Models
7. Separate Amplifier Model, Amplifier Units Expansion unit (Zero Line Type)

(/)

• Catalogues
• CAD Data
• Manuals
• Software
• Data Sheet (PDF)
• Price
• Experience Demo / Test
• Ask KEYENCE

Open Support Close Close Close Chat WhatsApp WhatsApp