Network Interfaces For CAN, CAN FD, LIN, K-Line, J1708 And IO

VN1641 CAN XL Interface Dedicated to CAN XL 1 / 5 VN1670 CAN/LIN Interface Now Supporting CAN XL 2 / 5 VN1630A / VN1640A Multi-purpose Interfaces with up to 4 CAN / CAN FD / LIN Channels 3 / 5 VN1610 / VN1611 Small Interfaces with 2 CAN / CAN FD / LIN Channels 4 / 5 VN1630 log Interface with up to 4 CAN / CAN FD / LIN Channels and Recording Functionality 5 / 5 VN1600 - Network Interfaces with USB and Ethernet for CAN / CAN FD / CAN XL, LIN, K-Line, J1708 and IO

The VN1600 interface family provides a flexible and fast access to CAN / CAN FD / CAN XL and LIN networks.

While the 2-channel VN1610 / VN1611 focuses on minimum size and weight, the 4-channel VN1630A / VN1640A / VN1630 log is designed for flexibility and IO support.

The 4-channel VN1641 offers access to CAN, CAN FD and CAN XL networks IO support and host connectivity via USB and Ethernet.

For greater flexibility, the VN1670 interface provides up to 15 channels, CAN XL support and host connectivity via USB and Ethernet.

The VN1630 log provides additional logging functionality.

The answer lies in a powerful CPU and FPGA architecture and numerous options for future functions and extensions. This makes the VN1670 a high-performance multi-channel interface for all developments where LIN and also new CAN technologies are used. Page navigation

• Advantages
• CAN XL
• Gallery
• Application Areas
• Functions
• Analog/digital IO
• Accessories
• Services
• Product Descriptions
• Technical Data
• Related Pages

Get a Quote

Advantages

VN1610/VN1611 VN1630A/VN1640A/VN1630 log VN1641 VN1670

• Channels with onboard transceiver
• Simple and handy host connection via USB
• Power supplied via USB
• Support of CAN FD
• Fast CAN flashing by a hardware-based flash routine implementation
• Synchronized channels with minimal latency times
• Optimal performance for CANoe*, CANalyzer*, CANape* or customer applications, with Multi-Application Support
• Multi-Application support
• * Ask Vector about required software versions and supported transceiver piggies.

• Bus transceiver with proven CAN/LIN/J1708-Piggies*
• channels with onboard transceiver
• simple and handy host connection via USB
• Power supplied via USB (VN1630 log: interface mode only)
• Support of CAN FD
• Fast CAN flashing by a hardware-based flash routine implementation
• Advanced LIN stress e.g. for LIN 2.1 conformance tests
• K-Line support*
• digital / analog IO
• CAPL on Board for CAN, LIN, IO
• Synchronized channels with minimal latency times
• Optimal performance for CANoe, CANalyzer, CANape or customer applications, with Multi- Application support
• Multi-Application support
• LEDs for displaying channel activity and device status
• Recording of CAN, LIN and IO data (VN1630 log)

Easy configuration of the recording functionality with the Vector Logger Configurator (VN1630 log)

* Ask Vector about required software versions and supported transceiver piggies.

• High flexibility in the selection of bus transceivers thanks to proven CAN piggies*
• Support of CAN XL
• Simple and handy host connection via USB and Ethernet
• Power supplied via USB
• Synchronized channels with minimal latency times
• Fast CAN flashing by a hardware-based flash routine implementation
• LEDs for displaying channel activity and device status

* Ask Vector about supported piggies.

• High flexibility through 15 channel solution for CAN / CAN FD / CAN XL and LIN
• Flexible bus transceiver with proven CAN/LIN-Piggies1)
• CAN/LIN channels with fixed onboard transceiver
• Support of CAN XL
• Fast flashing/acceleration of the CAN and CAN FD Transport Protocol
• Multi-Application support for CAN
• Advanced LIN stress e.g. for LIN 2.1 conformance tests
• Digital / analog IO2)
• Connection to the host PC via USB or Ethernet
• Synchronized channels with minimal latency times
• Optimal performance for CANoe, CANalyzer, CANape or customer applications, with Multi- Application support
• LEDs for displaying channel activity and device status
• Perfectly suited for the use in vehicles thanks to its robust housing and various mounting and stacking capabilities

1) Ask Vector about required software versions and supported transceiver piggies. 2) Please contact Vector for information on planned availability.

CAN XL

The VN1641 and VN1670 with CAN XL

• CAN XL Protocol: Support of Error Signaling Enabled and Error Signaling Disabled
• Usable with CANoe
• up to 20 Mbit/s with CAN SIC XL transceiver

Gallery

VN1600 Interface Family with the new VN1641 VN1670 front & back VN1641 VN1630A/VN1640A VN1610/VN1611 VN1630 log

Application Areas

VN1600 devices provide the best bus interface for Vector tools such as CANoe, CANalyzer, CANape, Indigo, vFlash as well as customer applications; in the laboratory, at the test bench, at the service garage or in the vehicle.

The application areas range from simple bus analysis to complex remaining bus simulations, diagnostic, calibration and flash programming tasks.

The product’s multi-application support makes it possible to access multiple programs in parallel on one device and on the same channel.

The VN1630 log provides additional recording functionality for CAN / CAN FD and LIN.

Functions

VN1600 Family

• Flexible FPGA-based CAN and LIN implementation allows 100% bus load on all channels
• Max. bitrates: CAN (max. 2 Mbit/s), CAN FD (max. 8 Mbit/s), CAN XL (up to 20bit/s) and LIN (up to 115 kBit/s, depending on wiring higher bitrates are possible)

VN1610 / VN1611 / VN1630A / VN1630 log / VN1640A

• Support of CAN / CAN FD and LIN
• Performing LIN 2.1 conformance tests with CANoe
• The integrated IO functionality makes it possible to synchronously acquire signals along with CAN / LIN messages and switch loads up to 500 mA via a digital output
• For weight and space savings, the interfaces have integrated CAN High-Speed transceiver(s). The standard D-SUB9 connector supports dual channels
• Recording functionality for monitoring vehicle communication (CAN / CAN FD, LIN) with VN1630 log. Data is stored on an SD/SDHC card (up to 32 GB)

VN1641

• Support of CAN / CAN FD / CAN XL
• Support of CAN XL with modes Error Signaling Enabled and Error Signaling Disabled
• The integrated IO functionality makes it possible to synchronously acquire signals along with CAN / LIN messages and switch loads up to 500 mA via a digital output
• Host connection via USB 3 or Ethernet

VN1670

• Support of CAN / CAN FD / CAN XL and LIN
• Support of CAN XL with modes Error Signaling Enabled and Error Signaling Disabled
• Performing LIN 2.1 conformance tests with CANoe (VN1630A / VN1640A / VN1630 log / VN1670)
• Host connection via USB 3 or Ethernet
• The VNpiggy30 IO 8644* is going to provide digital and analog IO
• 5 D-SUB15 HD connectors, providing one onboard CAN-, one onboard LIN- and one Piggyback channel each

* Please contact Vector for information on planned availability.

Analog/digital IO

VN1630A / VN1630 log / VN1640A / VN1641

• Analog input: 1 channel, 0...18 V, max. 50 V, (ext. circuitry required) Ri > 1 MOhm, 10 bit ADC at 1 kS/s
• Digital input: 2 channels, Schmitt trigger, max. 32 V, Vhigh ≥ 2.7 V, Vlow ≤ 2.2 V, Vhyst = 0.5 V, Ri > 200 kOhm, max. 1 kHz
• Digital output: 1 channel, open drain, max. 32 V, max. 500 mA, max. 1 kHz
• D-SUB9 socket

VN1670

• Digital and analog IOs via the new, upcoming VNpiggy30 IO 8644* (optional)

* Please contact Vector for information on planned availability.

Accessories

Vector offers a wide range of accessories for the network interfaces, including different cables and connectors, bus transceivers / piggybacks, mounting equipment and different power supply options.

Cables and Adapters

Bus-Transceiver / Piggybacks

Services

Download Center

Keep your Vector products up to date with the latest versions of drivers, manuals, firmware and software.Go to Page

KnowledgeBase

Explore technical articles, product documentation, and access other beneficial resourcesStart KnowledgeBase

Product Descriptions

Documents

Fact Sheet	Short overview of VN1600 Family facts (PDF) Short overview of VN1670 facts (PDF)
User Manual	User Manual (PDF)

Technical Data

Downloads

Related Pages

Network Interfaces

Interfaces for CAN, CAN FD, LIN, J1708, Ethernet/IP, FlexRay, and MOST

Testing

Testing tools for the implementation of simulation and test environments.

Measurement Technology

Master the Entire Measurement Chain from A to Z!

ECU Calibration

Measure & calibrate ECUs optimally – from A to Z!

Tools & Services for Diagnostics

Tools & services for the complete development process.

Cables and Adapters

Overview of all cables & adapters for CAN, FlexRay and Automotive Ethernet, cables for OBD and K-Line, I/O Piggy and SYNC for the network interfaces.

Internet Explorer

We recommend the use of a modern browser. We cannot guarantee that all functions will work properly in Internet Explorer.Close