Ryzen 5 3600 Overheating - PC Cases - Whirlpool Forums

Trang chủ » Nh-u9s Ryzen 3600 » Ryzen 5 3600 Overheating - PC Cases - Whirlpool Forums

Có thể bạn quan tâm

menu Whirlpool Go to navigation Whirlpool Search Archive View Return to standard view
  • from September 2021
  • to October 2021
last updated – posted 2021-Oct-16, 8:13 am AEST posted 2021-Oct-16, 8:13 am AEST User #822205 72 posts roofer12 Participant reference: whrl.pl/RgkTn7 ref: whrl.pl/RgkTn7 posted 2021-Sep-29, 8:13 pm AEST O.P.

I put together a build yesterday with ryzen 5 3600 and GTX 1650 that has a wraith Stealth cooler. I have a intel i5 7400 and gtx 950 that when using handbrake to convert a video file that takes 15 mins the cpu gets to 60-65 degrees. I was curious as to what the difference between the two would be. The ryzen when doing the same job got to 95 degrees in 60 seconds before I stopped it. I disabled XMP and made a little difference, (90 deg took 10 or 15 sec longer). It cools back down to mid 30 deg in approx 1 minute. Are the stock coolers so bad? I am quite sure I fitted the cooler properly, thermal paste was already on the cooler and the fitting of cooler is pretty hard to mess up. Does the rapid heating and cooling usually indicate badly fitted cooler or just an inadequate one? or should I look to another after market cooler. The machine would be for young grandson to play some games Fortnite, CSGO Dota etc. nothing serious.

 User #65621 47262 posts Wyrm 1972 Whirlpool Forums Addict reference: whrl.pl/RgkTof ref: whrl.pl/RgkTof posted 2021-Sep-29, 8:14 pm AEST

You need to measure temps with Ryzen Master. 3rd party tools don't play nice with Ryzen.

Er... You did remove the clear plastic cover on the cooler? (I didn't, so it got toasty quick first time I did it too, lol).

 User #862825 2880 posts SherLock05 Whirlpool Forums Addict reference: whrl.pl/RgkToC ref: whrl.pl/RgkToC posted 2021-Sep-29, 8:18 pm AEST

roofer12 writes...

or should I look to another after market cooler

The stock wraith is pretty terrible but shouldn't be that bad. I would remount and wipe the cooler clean and apply some fresh paste see if it helps.

I assume case is fine, plenty of airflow?

In any case a cheap hyper 212 or Gammaxx 400 v2 won't hurt.

 User #822205 72 posts roofer12 Participant reference: whrl.pl/RgkTqy ref: whrl.pl/RgkTqy posted 2021-Sep-29, 8:37 pm AEST O.P.

Wyrm 1972 writes...

You did remove the clear plastic cover on the cooler

It came in a sealed plastic bubble , I didn't think it had a sheet of plastic on it, but now I'm wondering. I downloaded Ryzen Master and the temp got to 90 deg after 2 mins and hovered on 90-92 after that.

SherLock05 writes...

I assume case is fine, plenty of airflow

I think so. it's a Aerocool mesh case with 2 front inlet and 1 rear exhaust. As far as the fresh paste goes I will be taking the cooler off because Wyrm 1972 has got me seriously doubting myself. I have been known to make newbie mistakes before.

 User #65621 47262 posts Wyrm 1972 Whirlpool Forums Addict reference: whrl.pl/RgkTvk ref: whrl.pl/RgkTvk posted 2021-Sep-29, 9:15 pm AEST

roofer12 writes...

I didn't think it had a sheet of plastic on it

Yeah, I can't quite remember if it was the stock cooler with the thin plastic cover on it or the 3rd party cooler I ended up getting that had the plastic cover I forgot to remove. Hmm... (think it was the 3rd party cooler, now that I think about it).

The wraith cooler isn't the greatest, but you're thermally throttling at 92 deg C, and it's better than that. May not be installed correctly.

I do advocate a 3rd party cooler for the 3600... quieter, cooler.

 User #332211 12079 posts Sleepycat Whirlpool Forums Addict reference: whrl.pl/RgkTwO ref: whrl.pl/RgkTwO posted 2021-Sep-29, 9:37 pm AEST

roofer12 writes...

It came in a sealed plastic bubble , I didn't think it had a sheet of plastic on it, but now I'm wondering. I downloaded Ryzen Master and the temp got to 90 deg after 2 mins and hovered on 90-92 after that.

When it hits 90 C, what is the CPU power value being reported in Ryzen Master?

 User #167833 15488 posts error-id10t Whirlpool Forums Addict reference: whrl.pl/RgkTxJ ref: whrl.pl/RgkTxJ posted 2021-Sep-29, 9:51 pm AEST

roofer12 writes...

I didn't think it had a sheet of plastic on it

Pretty sure the stock cooler has it, 5min job to get it out and check. Not like you're going to fix the problem without doing this anyway.

 User #21809 15844 posts smeagols ghost Whirlpool Forums Addict reference: whrl.pl/RgkTAB ref: whrl.pl/RgkTAB posted 2021-Sep-29, 10:31 pm AEST

roofer12 writes...

and the fitting of cooler is pretty hard to mess up. Does the rapid heating and cooling usually indicate badly fitted cooler

That quick is bad contact or you’ve left the plastic on it.

Other thing to check is the cooler attachment bars (the black things on the motherboard are firmly attached).

 User #62569 8307 posts SuperDude Whirlpool Forums Addict reference: whrl.pl/RgkTBd ref: whrl.pl/RgkTBd posted 2021-Sep-29, 10:40 pm AEST

re do the thermal paste

 User #822205 72 posts roofer12 Participant reference: whrl.pl/RgkTDh ref: whrl.pl/RgkTDh posted 2021-Sep-29, 11:12 pm AEST O.P.

error-id10t writes...

Pretty sure the stock cooler has

I pulled it out, no plastic, and the thermal paste seems to have been spread evenly across both surfaces.

Sleepycat writes...

When it hits 90 C, what is the CPU power value being reported in Ryzen Master?

I only just installed that app and don't know much about it.If you mean the voltage it starts off at 1.33 or so and drops off to 1.27 when it hits 90deg, if it goes below 90 it goes back to 1.33. I think I have heard so many bad things about the the stock cooler I,ll go for after market, maybe one of these.

SherLock05 writes...

hyper 212 or Gammaxx 400 v2

 User #486139 2258 posts 18pound Whirlpool Forums Addict reference: whrl.pl/RgkTD5 edited 2021-Sep-29, 11:45 pm AEST ref: whrl.pl/RgkTD5 posted 2021-Sep-29, 11:38 pm AEST (edited 2021-Sep-29, 11:45 pm AEST)

I run a Corsair H115i on my 3600x, the stock cooler was garbage and noisy.

Currently running 4.2ghz @ 1.175v and the highest I’ve ever seen it hit was 62c during stress testing

 User #353037 19470 posts Frøg Whirlpool Forums Addict reference: whrl.pl/RgkTL3 ref: whrl.pl/RgkTL3 posted 2021-Sep-30, 7:44 am AEST

roofer12 writes...

I,ll go for after market, maybe one of these.

If you have the room, get a Noctua D15. Kicks a lot of water coolers.If not much room, a U12S Noctua or C12 or L12 would do well also.They are also one of the easiest to install and have 6 year warranty.

BeQuiet! Dark Rock pro is also good but harder to install.

 User #79875 8219 posts SuM! Whirlpool Forums Addict reference: whrl.pl/RgkTMP ref: whrl.pl/RgkTMP posted 2021-Sep-30, 8:00 am AEST

remember 2 switch back on XMP :)

 User #862825 2880 posts SherLock05 Whirlpool Forums Addict reference: whrl.pl/RgkTM0 ref: whrl.pl/RgkTM0 posted 2021-Sep-30, 8:02 am AEST

Frøg writes...

If you have the room, get a Noctua D15. Kicks a lot of water coolers.

BeQuiet! Dark Rock pro is also good but harder to install.

The guy is running a 3600 mate not a 5900X LOL. Any decent 4 pipe cooler will do perfectly fine.

 User #45574 24300 posts Rendog Whirlpool Forums Addict reference: whrl.pl/RgkTPD ref: whrl.pl/RgkTPD posted 2021-Sep-30, 8:36 am AEST

18pound writes...

I run a Corsair H115i on my 3600x, the stock cooler was garbage and noisy.

Currently running 4.2ghz @ 1.175v and the highest I’ve ever seen it hit was 62c during stress testing

I did a similar which with my 3800x from a Wraith Prism to to a Corsiar H110 and hit helped allot, my temps only spiked when gaming or video editing they were fine the rest of the time.

 User #835727 2041 posts techspecs Whirlpool Forums Addict reference: whrl.pl/RgkTWQ ref: whrl.pl/RgkTWQ posted 2021-Sep-30, 9:21 am AEST

roofer12 writes...

It came in a sealed plastic bubble , I didn't think it had a sheet of plastic on it, but now I'm wondering.

Stock cooler has thermal paste preapplied. Sounds like you got an OEM? The paste might have dried up.

As Sherlock suggests, I'd take the cooler off, clean it with alcohol, apply new paste.

 User #353037 19470 posts Frøg Whirlpool Forums Addict reference: whrl.pl/RgkTYm ref: whrl.pl/RgkTYm posted 2021-Sep-30, 9:35 am AEST

SherLock05 writes...

The guy is running a 3600 mate not a 5900X LOL. Any decent 4 pipe cooler will do perfectly fine.

At least if they still get high temps, it won't be the cooler's fault :D

 User #332211 12079 posts Sleepycat Whirlpool Forums Addict reference: whrl.pl/RgkT7G ref: whrl.pl/RgkT7G posted 2021-Sep-30, 10:41 am AEST

roofer12 writes...

I only just installed that app and don't know much about it.If you mean the voltage it starts off at 1.33 or so and drops off to 1.27 when it hits 90deg, if it goes below 90 it goes back to 1.33. I think I have heard so many bad things about the the stock cooler I,ll go for after market, maybe one of these.

If you look on the main home screen of Ryzen master, there should be 5 dials in a row at the top. The 4th one is CPU Power. How many watts is it showing when your CPU hits 90 ºC?

Also, did you reapply new thermal paste after you pulled the cooler off to check? You need to as the contact area would have had the old paste squeezed out. Any thermal paste is better than none.

 User #353037 19470 posts Frøg Whirlpool Forums Addict reference: whrl.pl/RgkVcO ref: whrl.pl/RgkVcO posted 2021-Sep-30, 11:22 am AEST

Sleepycat writes...

Also, did you reapply new thermal paste after you pulled the cooler off to check?

Making sure you clean the old paste off the cpu and the cooler plate with some isopropyl alcohol and a lint free cloth

 User #254942 1767 posts No display name Whirlpool Enthusiast reference: whrl.pl/RgkVWZ ref: whrl.pl/RgkVWZ posted 2021-Sep-30, 5:29 pm AEST

Decided to check mine after this thread, same CPU with same cooler as OP, running ffmpeg video conversion the temps rise stratosphericly to 92C then back off somewhat to 89 and once the encoding finishes temps drop instantly to balmy 35C....oh dear when I thought it is safe to buy AMD again...

Oh well, back to Intel next time I built another rig!

 User #65621 47262 posts Wyrm 1972 Whirlpool Forums Addict reference: whrl.pl/RgkVW9 ref: whrl.pl/RgkVW9 posted 2021-Sep-30, 5:31 pm AEST

Švejk writes...

Oh well, back to Intel next time I built another rig

Intel stock coolers suck too (possibly moreso) , so not sure I see the logic in this.

Just get a decent cooler. They don't cost much for something that's better than stock cooler.

 User #835727 2041 posts techspecs Whirlpool Forums Addict reference: whrl.pl/RgkVXF edited 2021-Sep-30, 5:41 pm AEST ref: whrl.pl/RgkVXF posted 2021-Sep-30, 5:36 pm AEST (edited 2021-Sep-30, 5:41 pm AEST)

Švejk writes...

Oh well, back to Intel next time I built another rig!

Hope you're not trolling.

Check a 6 core 12 thread unlocked Intel power consumption. Will be twice as much as Ryzen. Think 11th gen goes to 140w or something.

Intel stock cooler will completely crap itself in such scenarios. Or CPU will throttle to about 3ghz.

Just get a cheap after market cooler if you are concerned. Can't use a cheap one on Intel though.

 User #254942 1767 posts No display name Whirlpool Enthusiast reference: whrl.pl/RgkV19 ref: whrl.pl/RgkV19 posted 2021-Sep-30, 6:30 pm AEST

techspecs writes...

Hope you're not trolling.

Nope I wasn't! It is just annyoing as I never had an issue with Intel and stock coolers but always had trouble with past AMD builts.Looks like I need decent cooler but which one again conundrum as usual...This built is multimedia server so it doesn't really work that hard but the encoding the video gave me a shock when I noticed the temps.

Regards

 User #65621 47262 posts Wyrm 1972 Whirlpool Forums Addict reference: whrl.pl/RgkV3f ref: whrl.pl/RgkV3f posted 2021-Sep-30, 6:45 pm AEST

Švejk writes...

Looks like I need decent cooler but which one again conundrum as usual

Even a $40 basic one is better than stock. But if your server isn't working hard what's the point?

 User #254942 1767 posts No display name Whirlpool Enthusiast reference: whrl.pl/RgkV38 ref: whrl.pl/RgkV38 posted 2021-Sep-30, 6:53 pm AEST

The point is that encoding videos will load it up, now that I'm aware how much is Ryzen heating up doing it.

Cheers

 User #65621 47262 posts Wyrm 1972 Whirlpool Forums Addict reference: whrl.pl/RgkV4J ref: whrl.pl/RgkV4J posted 2021-Sep-30, 7:01 pm AEST

Švejk writes...

much is Ryzen heating up doing it.

They're rated to 95 deg C, so it's within spec.

Intel get up that high too on stock coolers most of the time.

 User #822205 72 posts roofer12 Participant reference: whrl.pl/RgkWhK ref: whrl.pl/RgkWhK posted 2021-Sep-30, 9:41 pm AEST O.P.

After taking the cooler off to check for plastic I found I didn't have any thermal paste and of course I can"t go and get any so I cleaned the cpu up and ordered a Gammaxx 400. It looks like it will fit in the case with a few mls to spare. It seems everyone agrees that the stock coolers are no good and it's pointless trying to get a small improvement with new paste when it still wouldn't be good enough. It appears that the 3600 does run a little hotter than its predecessor, maybe its because of the stock cooler. As soon as I get the new cooler I'll run the same video conversion and let you all know how it goes.Thank you all for your advice and suggestions.

 User #435748 52911 posts Pavlov Whirlpool Forums Addict reference: whrl.pl/RgkWkk ref: whrl.pl/RgkWkk posted 2021-Sep-30, 10:20 pm AEST

See how you go with a better cooler, I guess.

With the Ryzen 5 3600, AMD lists the official TDP of the processor as 65 W.The Stealth cooler should be adequate.I'm running them on a 1700, 2200G and 3400G Ryzens without problems.

But thanks for the heads up, if I build a more powerful box in the future, a decent cooler like the Gammaxx 400 will be on my shopping list.

EDIT: ordinary hand sanitiser on a piece of paper towel works well for cleaning old thermal paste off a CPU and heatsink.

 User #835727 2041 posts techspecs Whirlpool Forums Addict reference: whrl.pl/RgkWIN ref: whrl.pl/RgkWIN posted 2021-Oct-1, 9:50 am AEST

roofer12 writes...

After taking the cooler off to check for plastic I found I didn't have any thermal paste

Wow and it still worked without any thermal paste.

Impressive.

Švejk writes...

when I thought it is safe to buy AMD

So looks like it's more than safe.

Pavlov writes...

EDIT: ordinary hand sanitiser on a piece of paper towel works well for cleaning old thermal paste off a CPU and heatsink.

But this can be dangerous. If the sanitiser has perfume or moisturiser or anything other than pure alcohol, it may cause fire hazard.

 User #353037 19470 posts Frøg Whirlpool Forums Addict reference: whrl.pl/RgkW08 ref: whrl.pl/RgkW08 posted 2021-Oct-1, 12:12 pm AEST

roofer12 writes...

After taking the cooler off to check for plastic I found I didn't have any thermal paste and of course I can"t go and get any so I cleaned the cpu up

techspecs writes...

Wow and it still worked without any thermal paste.

Hang on...

@roofer... you say you had to clean the CPU up. Why did you have to clean it up if there was no thermal paste?Or are you saying there was only residual thermal paste on the CPU and not on the cooler – which seems strange but plausible if removing the cooler when cold.

If that's the case then I'd say that you did everything correctly. I mean, it's hard to go wrong with stock coolers with pre applied thermal paste, especially with AMD as their retention clip either works or it doesn't, as opposed to Intel where, though the spring clips are pretty straight forward, one can possibly not push one of the clips down far enough and that would have a massive effect on cooling.

 User #332211 12079 posts Sleepycat Whirlpool Forums Addict reference: whrl.pl/RgkW2n ref: whrl.pl/RgkW2n posted 2021-Oct-1, 12:23 pm AEST

roofer12 writes...

After taking the cooler off to check for plastic I found I didn't have any thermal paste and of course I can"t go and get any so I cleaned the cpu up and ordered a Gammaxx 400.

Hope you ordered some extra thermal paste too.

 User #65621 47262 posts Wyrm 1972 Whirlpool Forums Addict reference: whrl.pl/RgkW8w ref: whrl.pl/RgkW8w posted 2021-Oct-1, 1:06 pm AEST

Frøg writes...

you say you had to clean the CPU up. Why did you have to clean it up if there was no thermal paste

There was thermal paste in it. What the OP didn't have was extra thermal paste to reapply the HSF after he took it apart and cleaned it.

 User #822205 72 posts roofer12 Participant reference: whrl.pl/RgkXeX ref: whrl.pl/RgkXeX posted 2021-Oct-1, 1:40 pm AEST O.P.

Wyrm 1972 writes...

There was thermal paste in it. What the OP didn't have was extra thermal paste to reapply the HSF after he took it apart and cleaned it.

That's correct,

Frøg writes...

["you say you had to clean the CPU up"Bit of a misunderstanding there, it was the cooler not the cpu. I once needed to give myself an injection and could only buy a box of 200 cleaning swabs from the late night chemist and they happen to be 70% Isopropyl Alcohol, perfect for cleaning thermal paste.

 User #254942 1767 posts No display name Whirlpool Enthusiast reference: whrl.pl/RgkXTz ref: whrl.pl/RgkXTz posted 2021-Oct-1, 7:46 pm AEST

Can confirm for OP that stock cooler is utter garbage! Just installed aftermarket unit and voila temps would not go over 77C under severe load for 25 mins....

This has been a reveleation but after researching last night it is very common for Ryzen 3600 with stock cooler to cook. AMD how much are you saving on the deal? There should be warning sticker on the packaging to not install stock cooler!

Regards

 User #353037 19470 posts Frøg Whirlpool Forums Addict reference: whrl.pl/RgkX0j ref: whrl.pl/RgkX0j posted 2021-Oct-1, 8:58 pm AEST

Švejk writes...

Just installed aftermarket unit and voila temps would not go over 77C under severe load for 25 mins....

What cooler did you get?

 User #254942 1767 posts No display name Whirlpool Enthusiast reference: whrl.pl/RgkX2E edited 2021-Oct-1, 10:21 pm AEST ref: whrl.pl/RgkX2E posted 2021-Oct-1, 9:37 pm AEST (edited 2021-Oct-1, 10:21 pm AEST)

Frøg writes...

What cooler did you get?

Noctua NH-U9S cause as it was the only one with simplest installation (nothing to change add/ brackets or whatever in lieu of stock cooler)the only one guaranteed to fit in my case (CS380) and more importantly the only one I could get my hands on this arvo. In any case I'm impressed with the quality too. Nothing worse then buying $40 Chinese cooler to wonder how to fit it. Bugger that!

Cheers

 User #353037 19470 posts Frøg Whirlpool Forums Addict reference: whrl.pl/RgkX66 ref: whrl.pl/RgkX66 posted 2021-Oct-1, 10:48 pm AEST

Švejk writes...

Noctua NH-U9S

Wow, only a U9S!Not even a 120mm fan. Shows you just how bad the stock cooler is then.As was said above – the 3600 shouldn't be too taxing for a cooler to keep under control.

it was the only one with simplest installation

The Noctuas are really really simple to install and they last forever.

 User #435748 52911 posts Pavlov Whirlpool Forums Addict reference: whrl.pl/RgkYEo ref: whrl.pl/RgkYEo posted 2021-Oct-2, 1:00 pm AEST

Švejk writes...

There should be warning sticker on the packaging to not install stock cooler!

Most owners of 3600 and other hot Ryzens have gotten the message.There's a reason why they show up on eBay as an unused item, cheap. lolI've bought a couple to replace ones with noisy fans. It's impossible to pull the fan apart to get to the bearings without destroying the whole thing.

 User #28069 9486 posts AnotherDayInParadise In the penalty box reference: whrl.pl/RgkYVC ref: whrl.pl/RgkYVC posted 2021-Oct-2, 4:05 pm AEST

I've setup Ryzen 3600's with stock heatsink/fans and while they aren't the greatest they do work okay though the fan can be noisy.

I'm wondering if people are actually tightening the screws up in the right order.

 User #325838 3951 posts Yuri Lowell Whirlpool Forums Addict reference: whrl.pl/RgkYW1 ref: whrl.pl/RgkYW1 posted 2021-Oct-2, 4:22 pm AEST

SherLock05 writes...

The guy is running a 3600 mate not a 5900X LOL. Any decent 4 pipe cooler will do perfectly fine.

I dunno my 5900X runs cooler than my 3600. Something about the 3600 is just really hot for some reason. I had an NH-D14 on it and it would hit 70C quite easily, whereas my 5900X with the same NH-D14 doesn't crack 65C. Both in Cinebench. Also the boost frequency on my 3600 is really low at 3.95GHz all core and 4.1GHz single core. Lower than the advertised spec and about 10% slower compared to average scores in Cinebench. Maybe my 3600 is just a loser of the silicon lottery.

 User #42782 2045 posts DollaBills Whirlpool Forums Addict reference: whrl.pl/Rgk6Ex ref: whrl.pl/Rgk6Ex posted 2021-Oct-7, 8:38 am AEST

Ryzen 3600 stock cooler is absolute trash. Stupidly loud too.

Upgraded to Gammamax GTE V2.

Temps at idle & full load dropped by 15c.

I cannot get the CPU past 72c. Previously it could hit 90c in a stress test before i'd stop – likely would keep climbing.

 User #822205 72 posts roofer12 Participant reference: whrl.pl/Rgk9DD ref: whrl.pl/Rgk9DD posted 2021-Oct-8, 8:35 pm AEST O.P.

I don't know if anyone is still looking at this but an update. I got the Gammaxx 400 XT today and fitted it which was dead simple. I did the same video conversion and the temperature never got above 71.5 degrees, a difference of between 19 to 21 degrees. At idle with nothing going on it is 29 degrees, a difference of around 7 or 8 degrees. Absolutely thrilled with it. It's a pity the stock coolers haven't advanced at the same rate as the cpu's because there is loads of anecdotal evidence that the stock coolers just don't cut it for the Ryzen 3600.

 User #862825 2880 posts SherLock05 Whirlpool Forums Addict reference: whrl.pl/Rgk9GF ref: whrl.pl/Rgk9GF posted 2021-Oct-8, 9:07 pm AEST

roofer12 writes...

I got the Gammaxx 400 XT today and fitted it which was dead simple. I did the same video conversion and the temperature never got above 71.5 degrees, a difference of between 19 to 21 degrees

That's good to hear, Deepcool make some really nice coolers especially on the budget end of the scale.

 User #263 1298 posts 0xyg3n Whirlpool Enthusiast reference: whrl.pl/Rgk9IX ref: whrl.pl/Rgk9IX posted 2021-Oct-8, 9:41 pm AEST

Just purchased a Noctua NH-U9S to replace my stock cooler. had a play with a few overclocks but kept topping out at 95 deg after a short time @ 100% load. Hopefully this cooler will keep things a little cooler

 User #822205 72 posts roofer12 Participant reference: whrl.pl/Rgk9Mj ref: whrl.pl/Rgk9Mj posted 2021-Oct-8, 10:28 pm AEST O.P.

0xyg3n writes...

Hopefully this cooler will keep things a little cooler

Mate, there's no way in the world it won't be better than the stock.

 User #263 1298 posts 0xyg3n Whirlpool Enthusiast reference: whrl.pl/Rglbo6 ref: whrl.pl/Rglbo6 posted 2021-Oct-10, 10:30 am AEST

Just installed the cooler, heaps better. With my mild oc (4300) was topping out at 95 Deg C . ran same stress test with cooler installed and now sitting on 72 Deg C. Well worth the money and nice and quiet

 User #42782 2045 posts DollaBills Whirlpool Forums Addict reference: whrl.pl/Rglbr2 ref: whrl.pl/Rglbr2 posted 2021-Oct-10, 10:59 am AEST

roofer12 writes...

there is loads of anecdotal evidence that the stock coolers just don't cut it for the Ryzen 3600.

Anecdotal? It's fact the stock cooler is trash.

Both thermally and its ridiculously noisy.

 User #47193 5517 posts FourSeven193 Whirlpool Forums Addict reference: whrl.pl/Rglbwf ref: whrl.pl/Rglbwf posted 2021-Oct-10, 11:20 am AEST

DollaBills writes...

Anecdotal? It's fact the stock cooler is trash.

Both thermally and its ridiculously noisy.

Can confirm the stock cooler is absolute garbage. The one on the 3600X is even worse than the 3600.

 User #822205 72 posts roofer12 Participant reference: whrl.pl/RglbJD ref: whrl.pl/RglbJD posted 2021-Oct-10, 1:57 pm AEST O.P.

FourSeven193 writes...

Anecdotal? It's fact the stock cooler is trash

Yep, I stand corrected

 User #896056 547 posts Moist Crumpet In the penalty box reference: whrl.pl/Rgllbh ref: whrl.pl/Rgllbh posted 2021-Oct-16, 8:13 am AEST

I brought a 5600X and found the stock cooler very poor in keeping the CPU at decent temps. This was without any overclocking or boosting settings enabled. Often I would see it spike to 80*c.I purchased a Noctua 120mm dual fan cooler from PCCG and my 5600X now runs at 4.18ghz at 69*c max temps all day everyday even when running things like Prime95 for 30mins. This is during an aussie summer too.Highly recommend getting a decent aftermarket cooler.

 Archive View Return to standard view Local time 4:01 AM AEST 4 March 2026 Membership 937,915 registered members 5,585 visited in past 24 hrs Big numbers 3,929,685 threads 76,220,404 posts 4,988 wiki topics 2,256 modems & routers 85,958 features filled Computers Desktops Laptops Peripherals Windows Apple Linux/BSD Technology Modems/Routers Networking Telephony Servers/Hosting Web development Programming Server management ISPs Choosing an ISP Broadband NBN Telstra Broadband Optus Broadband Aussie Broadband TPG Group Superloop Vocus Group Exetel Other ISPs Mobile Mobile carriers Wireless ISPs iPhone Android phones Android tablets Other phones Life Jobs Education Graduate programs Finance Real Estate Lifestyle Shopping Travel Entertainment Home theatre TV shows Movies Music Gaming Sport Lounges Automotive Photography Home Home tech Energy Hobbies/Interests Gadgets On the internet Help Whirlpool FAQ Community rules Moderation FAQ Rep code of conduct Privacy policy Legal complaints Sections Hardware database Knowledge base Whirlpool.net.au Copyright © 2026 Whirlpool.net.au Legal

Từ khóa » Nh-u9s Ryzen 3600