How Far Does Power Steering Pump Pulley Go Back On The Shaft?

Vintage Mustang Forums banner Menu Log in Sign up
  • Home
  • Forums
  • Vintage Mustang Forums
  • General Vintage Mustang Forum
70_Fastback I'm putting the pulley back on my power steering pump, and I didn't mark it before I took it off. It's a '70, 302 - original PS pump, etc. Can anyone measure the gap between the back of pulley and the face of the stamped mounting bracket - so I can use for a reference? Thanks a lot! #1 · Jul 19, 2008 I'm putting the pulley back on my power steering pump, and I didn't mark it before I took it off. It's a '70, 302 - original PS pump, etc. Can anyone measure the gap between the back of pulley and the face of the stamped mounting bracket - so I can use for a reference? Thanks a lot! Sort by Oldest first Oldest first Newest first Most reactions #2 · Jul 19, 2008 The end of the shaft should be flush with the face of the hub of the pulley. If you are using a pulley installation tool it should have a stop so that you know when its on far enough. I've done this with a vise, some threaded rod, washers and a nut. Thread the rod into the shaft of the pump, position pulley, stack washer and tighten the nut. Not fun, but it works. #3 · Jul 19, 2008 That is an interesting question. My Grabber is sitting outside in the driveway. The pump shaft end is roughly an 1/8 of an inch inside the pulley center, not quite flush. If that helps. #4 · Jul 19, 2008 Mine is appx 1/8" or less inside of the pulley as well. It just didn't want to go anymore with the pulley installer tool - so I guess it's where it needs to be :shrug: Thanks for all of the responses guys! #5 · Jul 19, 2008 +1 flush :thumbsup: Insert Quotes Post Reply
  1. ?
  2. ?
  3. ?
  4. ?
  5. ?
  6. ?
  7. ?
  8. ?
  9. ?
  10. ?
  11. ?
  12. ?
  13. ?
  14. ?
  15. ?
  16. ?
  17. ?
  18. ?
  19. ?
  20. ?
posts 4.3M members 104K Since 2001 A forum community dedicated to vintage Ford Mustang owners and enthusiasts. Come join the discussion about restoration, modifications, NOS parts, troubleshooting, VIN codes, and more! Show Less Full Forum Listing Explore Our Forums General Vintage Mustang Forum Mod and Custom Forum Want Ads Build Forum Concours Forum

Our Vendors

View All
  • Logo for Street or Track LLC. Street or Track LLC Website
  • H Hagerty Forum
  • H Hagerty_Claims View profile

Top Contributors this Month

View All dennis111 3.4K Replies myfirstcar66 294 Replies C cougar70 273 Replies

Recommended Communities

Community avatar for VWVortex Volkswagen Forum VWVortex Volkswagen Forum 1.6M members Community avatar for Hot Rods Hot Rods 214K members Community avatar for 7th Gen Mustang Forum 7th Gen Mustang Forum 2K members
  • Home
  • Forums
  • Vintage Mustang Forums
  • General Vintage Mustang Forum

Tag » How Far To Press On Power Steering Pulley