C95800 Aluminum Bronze In Solids & Rectangles
Atlas Bronze offers C95800 Aluminum Bronze in Solids and Rectangles.
This alloy is available as both an Off-the-Shelf product and in special castings.
This is an excellent heavy duty bearing alloy. However, it does not tolerate misalignment or dirty lubricants, and generally should be used against hardened steel shafts, with both shaft and bearing machined to fine surface finishes.
We offer this material in Made To Order sizes in Centrifugal Castings and Sand Castings. Tell us what your desired sizes are and we will work up a quote for you. Please indicate if any specifications that must be met.
C95800 TYPICAL APPLICATIONS:
This material is used in a variety of applications. Typical uses for this alloy are:
- nuts
- bushings
- gears
- machinery
- pickling equipment
- blades
- propeller hub
- shafts
- valve bodies
- wear plates
- worm wheels
- covers for marine hardware
- marine hardware
- ship building
- sea water valves
- elbows
C95800 CHEMICAL COMPOSITION:
(%max., unless shown as range or min.)
Cu | Pb | Fe | Ni (1)(2) | Al | Mn | Si |
---|---|---|---|---|---|---|
79.00 min | 0-0.03 | 3.50- 4.50 | 4.00- 5.00 | 8.50- 9.50 | 0.80- 1.50 | 0-0.10 |
(1) Ni value includes Co. Note: Cu + Sum of Named Elements, 99.5% min.
C95800 MECHANICAL PROPERTIES:
(measured at room temperature, 68°F (20°C))
Temper Code | Tensile Strength | Yield Strength(0.5% ext.under load) | Elongation (%) | Rockwell B Scale | Brinell Hardness, 3000 kg load | Shear Strength (ksi) | Izod (ft-lbs) | Charpy V-Notch Impact Strength (ft-lbs) | Compressive Strength .001 in. set/in. (ksi) | Compressive Strength .01 in. set/in. (ksi) | Compressive Strength .1 in. set/in. (ksi) | Fatigue Strength** (ksi) | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
As Centrifugal Cast | |||||||||||||||||||
M02 | 85 Min for Standard | 35 Min for Standard | 15 Min For Standard | - | - | - | - | - | - | - | - | - | |||||||
As Continuous Cast | |||||||||||||||||||
M07 | 85 Min for Standard | 35 Min for Standard | 15 Min For Standard | - | - | - | - | - | - | - | - | - | |||||||
As Permanent Mold Cast | |||||||||||||||||||
M05 | 90 Min for Standard | 40 Min for Standard | 15 Min For Standard | 88 Typ | - | - | - | - | - | - | - | - | |||||||
As Sand Cast | |||||||||||||||||||
M01 | 85 Min for Standard | 35 Min for Standard | 15 Min For Standard | - | 159 Typ | 58 Typ | 20 Typ | 10 Typ 16 Typ | 35 Typ | 48 Typ | 100 Typ | 31 Typ |
*Fatigue Strength: 100 x 10 6cycles,unless indicated as [N]X 106.
C95800 APPLICABLE SPECIFICATIONS:
NOTE: Information courtesy of Copper.org
Casting Method | Specification |
---|---|
Centrifugal | ASTM B271 |
Continuous | ASTM B505 |
Ingot | ASTM B30 |
Sand | ASTM B148 |
Từ khóa » C95800
-
C95800 Bar & Forgings Grade - Aluminium Bronze
-
C95800 Alloy, C958 Nickel-Aluminum Bronze
-
Nickel Aluminum Bronze - Copper Casting Alloy UNS C95800 - AZoM
-
C95800 Alloy
-
C95800 Alpha Nickel Aluminum Bronze - Aviva Metals
-
ASTM C95800 - Nickel Aluminium Bronze - Copper Alloys Ltd
-
C95800 Nickel Aluminum Bronze Technical Data Sheet
-
Alloy Grade UNS: C95800 - Highly Flexible Alloys - MetalTek
-
ASTM B148 Grade C95800 As-Cast Or Temper-Annealed - Matmatch
-
Alpha Nickel-Aluminum Bronze, UNS C95800, Copper Casting Alloy
-
Nickel Aluminium Bronze C95800 , UNS C95800 Alloys
-
Nickel Aluminium Bronze Supplier | UNS C95800 - E Steel Sdn.Bhd
-
C95500 Bronze Vs. C95800 Bronze
-
C95800 CDA 958 Aluminum Bronze Alloys - Conex Casting