CC1100 Data Sheet, Product Information And Support

Home Wireless connectivity

• parametric-filter Amplifiers
• parametric-filter Audio
• parametric-filter Battery management ICs
• parametric-filter Clocks & timing
• parametric-filter DLP products
• parametric-filter Data converters
• parametric-filter Die & wafer services
• parametric-filter Interface
• parametric-filter Isolation
• parametric-filter Logic & voltage translation
• parametric-filter Microcontrollers (MCUs) & processors
• parametric-filter Motor drivers
• parametric-filter Passive and discrete
• parametric-filter Power management
• parametric-filter RF & microwave
• parametric-filter Sensors
• parametric-filter Switches & multiplexers
• parametric-filter Wireless connectivity

Sub-1 GHz products

• parametric-filter Automotive wireless connectivity products
• parametric-filter Low-power 2.4-GHz products
• parametric-filter Other wireless products
• parametric-filter Sub-1 GHz products
• parametric-filter Wi-Fi products

Sub-1 GHz transceivers

• parametric-filter Sub-1 GHz transceivers
• parametric-filter Sub-1 GHz wireless MCUs

Home Wireless connectivity Sub-1 GHz products Sub-1 GHz transceivers CC1100 NOT RECOMMENDED FOR NEW DESIGNS

Highly Integrated MultiCh RF transceiver Designed for Low-Power Wireless apps

Order now Data sheet

• document-pdfAcrobat Single-Chip Low Cost Low Power RF-Transceiver datasheet (Rev. D)

Errata

• document-pdfAcrobat CC1100 Silicon Errata (Rev. D)

CC1100 is not recommended for new designs This product continues to be available for existing customers. New designs should consider an alternate product. open-in-new Compare alternates

Pin-for-pin with same functionality to the compared device

CC1101 ACTIVE Low-power Sub-1 GHz wireless transceiver This product has improved performance and errata fixes.

CC1100

NOT RECOMMENDED FOR NEW DESIGNS Data sheet Order now

Product details

Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 800-928 Type Transceiver TX power (max) (dBm) 10 Sensitivity (best) (dBm) -111 RX current (lowest) (mA) 14.4 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 800-928 Type Transceiver TX power (max) (dBm) 10 Sensitivity (best) (dBm) -111 RX current (lowest) (mA) 14.4 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 VQFNP (RTK) 20 16 mm² 4 x 4

• RF Performance
  High sensitivity (–111 dBm at 1.2 kBaud, 868 MHz, 1% packet error rate)
  • Low current consumption (14.4 mA in RX, 1.2 kBaud, 868 MHz)
  • Programmable output power up to +10 dBm for all supported frequencies
  • Excellent receiver selectivity and blocking performance
  • Programmable data rate from 1.2 to 500 kBaud
  • Frequency bands: 300-348 MHz, 400-464 MHz and 800-928 MHz
• Analog Features
  • 2-FSK, GFSK, and MSK supported as well as OOK and flexible ASK shaping
  • Suitable for frequency hopping systems due to a fast settling frequency synthesizer: 90µs settling time
  • Automatic Frequency Compensation (AFC) can be used to align the frequency synthesizer to the received centre frequency
  • Integrated analog temperature sensor
• Digital Features
  • Flexible support for packet oriented systems: On-chip support for sync word detection, address check, flexible packet length, and automatic CRC handling
  • Efficient SPI interface: All registers can be programmed with one "burst" transfer
  • Digital RSSI output
  • Programmable channel filter bandwidth
  • Programmable Carrier Sense (CS) indicator
  • Programmable Preamble Quality Indicator (PQI) for improved protection against false sync word detection in random noise
  • Support for automatic Clear Channel Assessment (CCA) before transmitting (for listen-before-talk systems)
  • Support for per-package Link Quality Indication (LQI)
  • Optional automatic whitening and dewhitening of data
• Low-Power Features
  • 400nA SLEEP mode current consumption
  • Fast startup time: 240µs from sleep to RX or TX mode (measured on EM reference design [5] and [6])
  • Wake-on-radio functionality for automatic low-power RX polling
  • Separate 64-byte RX and TX data FIFOs (enables burst mode data transmission)
• General
  • Few external components: Completely onchip frequency synthesizer, no external filters or RF switch needed
  • Green package: RoHS compliant and no antimony or bromine
  • Small size (QLP 4×4 mm package, 20 pins)
  • Suited for systems targeting compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US).
  • Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols
• Applications
  • Ultra low-power wireless applications operating in the 315/433/868/915 MHz ISM/SRD bands
  • Wireless alarm and security systems
  • Industrial monitoring and control
  • Wireless sensor networks
  • AMR – Automatic Meter Reading
  • Home and building automation

• RF Performance
  High sensitivity (–111 dBm at 1.2 kBaud, 868 MHz, 1% packet error rate)
  • Low current consumption (14.4 mA in RX, 1.2 kBaud, 868 MHz)
  • Programmable output power up to +10 dBm for all supported frequencies
  • Excellent receiver selectivity and blocking performance
  • Programmable data rate from 1.2 to 500 kBaud
  • Frequency bands: 300-348 MHz, 400-464 MHz and 800-928 MHz
• Analog Features
  • 2-FSK, GFSK, and MSK supported as well as OOK and flexible ASK shaping
  • Suitable for frequency hopping systems due to a fast settling frequency synthesizer: 90µs settling time
  • Automatic Frequency Compensation (AFC) can be used to align the frequency synthesizer to the received centre frequency
  • Integrated analog temperature sensor
• Digital Features
  • Flexible support for packet oriented systems: On-chip support for sync word detection, address check, flexible packet length, and automatic CRC handling
  • Efficient SPI interface: All registers can be programmed with one "burst" transfer
  • Digital RSSI output
  • Programmable channel filter bandwidth
  • Programmable Carrier Sense (CS) indicator
  • Programmable Preamble Quality Indicator (PQI) for improved protection against false sync word detection in random noise
  • Support for automatic Clear Channel Assessment (CCA) before transmitting (for listen-before-talk systems)
  • Support for per-package Link Quality Indication (LQI)
  • Optional automatic whitening and dewhitening of data
• Low-Power Features
  • 400nA SLEEP mode current consumption
  • Fast startup time: 240µs from sleep to RX or TX mode (measured on EM reference design [5] and [6])
  • Wake-on-radio functionality for automatic low-power RX polling
  • Separate 64-byte RX and TX data FIFOs (enables burst mode data transmission)
• General
  • Few external components: Completely onchip frequency synthesizer, no external filters or RF switch needed
  • Green package: RoHS compliant and no antimony or bromine
  • Small size (QLP 4×4 mm package, 20 pins)
  • Suited for systems targeting compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US).
  • Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols
• Applications
  • Ultra low-power wireless applications operating in the 315/433/868/915 MHz ISM/SRD bands
  • Wireless alarm and security systems
  • Industrial monitoring and control
  • Wireless sensor networks
  • AMR – Automatic Meter Reading
  • Home and building automation

The CC1100 is a low-cost sub- 1 GHz transceiver designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-348 MHz, 400-464 MHz and 800-928 MHz bands.

The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data up to 500 kBaud.

CC1100 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio.

The main operating parameters and the 64-byte transmit/receive FIFOs of CC1100 can be controlled via an SPI interface. In a typical system, the CC1100 will be used together with a microcontroller and a few additional passive components.

The CC1100 is a low-cost sub- 1 GHz transceiver designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-348 MHz, 400-464 MHz and 800-928 MHz bands.

The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data up to 500 kBaud.

CC1100 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio.

The main operating parameters and the 64-byte transmit/receive FIFOs of CC1100 can be controlled via an SPI interface. In a typical system, the CC1100 will be used together with a microcontroller and a few additional passive components.

filter Find other Sub-1 GHz transceivers Download

Technical documentation

star =Top documentation for this product selected by TI No results found. Please clear your search and try again. View all 3

Type	Title	Date
*	Errata	CC1100 Silicon Errata (Rev. D)	21 Sep 2015
*	Data sheet	Single-Chip Low Cost Low Power RF-Transceiver datasheet (Rev. D)	29 May 2009
*	Radiation & reliability report	CC1100 Reliability report	16 Jul 2007

Ordering & quality

Information included:

• RoHS
• REACH
• Device marking
• Lead finish/Ball material
• MSL rating/Peak reflow
• MTBF/FIT estimates
• Material content
• Qualification summary
• Ongoing reliability monitoring

Information included:

• Fab location
• Assembly location