Coolant Concentrate G12, G12+ - TecLub

Benefits

  • Increased life time, allowing less frequent maintenance, thanks to the corrosion inhibitors which have a very low depletion rate.
  • Thermal characteristics that permit effective engine cooling without boiling.
  • Elimination of deposit problems caused by use of hard water.
  • Elimination of abrasives solids, which gives a better protection of the joints of the water pump.
  • Improved anticorrosion protection of all metals and alloys used in the cooling system of modern vehicles, especially the aluminium.
  • Protection against frost, depending upon the concentration chosen.
  • Excellent antifoaming characteristics.
  • Meets most European and International Standards.

Performance

Coolant Concentrate G12, G12+ exceeds most of the European and International quality standards:

  • AFNOR NF R15-601 (France)
  • ASTM D3306 (USA)
  • ASTM D4985 (USA)
  • CUNA NC 956-16
  • SAE J 1034
  • AS 2108 (Australia)
  • ASTM D4656 (USA)
  • BS 6580: 2010 (UK)
  • FVV Heft R443
  • UNE 26361-88

The following OEM specifications are met by Coolant Concentrate G12, G12+:

OEM OEM standard
DAF 74002
Ford WSS-M97B44-D
General Motors GM 6277M
MAN MAN 324 SNF
Mercedes-Benz MB 325.3
Renault 41-01-001
Renault Trucks
SEAT TL 774 D & F (G12 / G12+)
Skoda TL 774 D & F (G12 / G12+)
Volkswagen VAG TL 774 D & F (G12 / G12+)
Volvo VCS

Usage

Suitable for both petrol and diesel engines. Coolant Concentrate G12, G12+ is an extended life antifreeze which should be replaced every 5 years or every 250.000 km for passenger vehicles or every 1.000.000 km for trucks and commercial vehicles. Original Equipment Manufacturers’ (OEMs) recommendations should be followed when replacing coolant.

Typical properties

Parameter Value
Appearance Clear liquid, free from suspended matter
Density 1,119 g/cm3
pH (50% vol in water) 8,2
Freezing point (50% vol in water) -38°C
Boiling point 172°C
Reserve alkalinity (ml HCl N/10) 6,2 ml
Water content 2,8% wt
Foaming characteristics at 88°C
Height 35 ml
Breaktime 1,5 seconds
Colour as dyed

These are typical properties and do not constitute a specification, for specification limits please refer to product specification.

Từ khóa » G12 G12+ Vs G12++