C10200 Alloy

Trang chủ » C11000 Vs C10200 » C10200 Alloy

Có thể bạn quan tâm

  • Home
  • Resources
  • Alloy Properties & Uses
Find suppliers for this alloy C10200 C10200 Oxygen-Free OF Wrought COPPERS Coppers true true https://api.copper.org/alloys.xhtml/C10200 Chemical Composition
Elements
Cu(1,2,3) O
(1) Cu is determined by the difference between the impurity total and 100%. (2) This is a high conductivity copper which has, in the annealed condition a minimum conductivity of 100% IACS except for Alloy C10100 which has a minimum conductivity of 101% IACS. (3) Cu value includes Ag.
Min (%) 99.95
Max (%) 0.0010
Mechanical Properties *
Form Temper Temper Code Tensile Strength(ksi) YS-0.5% Ext(ksi) Elongation(%) Rockwell B scale Rockwell F scale Rockwell 30T scale Shear Strength(ksi) Fatigue Strength**(ksi) Section Size(in) Cold Work(%)
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106.
Flat Products 1/2 Hard H02 42 Typ 36 Typ 14 Typ 40 Typ 84 Typ 50 Typ 26 Typ 13 Typ 0.04
1/4 Hard H01 38 Typ 30 Typ 25 Typ 25 Typ 70 Typ 36 Typ 25 Typ 0.04
1/4 Hard H01 38 Typ 30 Typ 35 Typ 25 Typ 70 Typ 25 Typ 0.25
1/8 Hard H00 36 Typ 28 Typ 40 Typ 10 Typ 60 Typ 25 Typ 0.25
1/8 Hard H00 36 Typ 28 Typ 30 Typ 10 Typ 60 Typ 25 Typ 25 Typ 0.04
As Hot Rolled M20 34 Typ 10 Typ 45 Typ 45 Typ 23 Typ 0.04
As Hot Rolled M20 32 Typ 10 Typ 50 Typ 40 Typ 22 Typ 0.25
Extra Spring H10 57 Typ 53 Typ 4 Typ 62 Typ 95 Typ 64 Typ 29 Typ 0.04
Hard H04 50 Typ 45 Typ 12 Typ 50 Typ 90 Typ 28 Typ 0.25
Hard H04 50 Typ 45 Typ 6 Typ 50 Typ 90 Typ 57 Typ 28 Typ 13 Typ 0.04
Hard H04 45 Typ 40 Typ 20 Typ 45 Typ 85 Typ 26 Typ 1
Nominal Grain Size 0.025 mm OS025 34 Typ 11 Typ 45 Typ 45 Typ 23 Typ 11 Typ 0.04
Nominal Grain Size 0.050 mm OS050 32 Typ 10 Typ 45 Typ 40 Typ 22 Typ 0.04
Nominal Grain Size 0.050 mm OS050 32 Typ 10 Typ 50 Typ 40 Typ 22 Typ 0.25
Spring H08 55 Typ 50 Typ 4 Typ 60 Typ 94 Typ 63 Typ 29 Typ 14 Typ 0.04
Rod As Hot Rolled M20 32 Typ 10 Typ 55 Typ 40 Typ 22 Typ 1
Hard H04 55 Typ 50 Typ 10 Typ 60 Typ 94 Typ 29 Typ 0.25 40
Hard H04 48 Typ 44 Typ 16 Typ 47 Typ 87 Typ 27 Typ 17 Typ 1 35
Hard H04 45 Typ 40 Typ 20 Typ 45 Typ 85 Typ 26 Typ 2 16
Nominal Grain Size 0.050 mm OS050 32 Typ 10 Typ 55 Typ 40 Typ 22 Typ 1
Shapes As Hot Extruded M30 32 Typ 10 Typ 50 Typ 40 Typ 22 Typ 0.5
As Hot Rolled M20 32 Typ 10 Typ 50 Typ 40 Typ 22 Typ 0.5
Hard H04 40 Typ 32 Typ 30 Typ 35 Typ 26 Typ 0.5 15
Nominal Grain Size 0.050 mm OS050 32 Typ 10 Typ 50 Typ 40 Typ 22 Typ 0.5
Tube Hard Drawn H80 55 Typ 50 Typ 8 Typ 60 Typ 95 Typ 63 Typ 29 Typ 0.065 40
Light Drawn, Light Cold Rolled H55 40 Typ 32 Typ 25 Typ 35 Typ 77 Typ 45 Typ 26 Typ 0.065 15
Nominal Grain Size 0.025 mm OS025 34 Typ 11 Typ 45 Typ 45 Typ 23 Typ 0.065
Nominal Grain Size 0.050 mm OS050 32 Typ 10 Typ 45 Typ 40 Typ 22 Typ 0.065
Wire Hard H04 55 Typ 1.5 Typ 29 Typ 0.08
Nominal Grain Size 0.050 mm OS050 35 Typ 35 Typ 24 Typ 0.08
Spring H08 66 Typ 1.5 Typ 33 Typ 0.08
Physical Properties
Melting Point - Liquidus°F 1981
Melting Point - Solidus°F 1981
Densitylb/cu in. at 68°F 0.323
Specific Gravity 8.94
Electrical Conductivity% IACS at 68°F 101
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F 226
Coefficient of Thermal Expansion 68-21210 to -6 power per °F (68 – 212°F) 9.4
Coefficient of Thermal Expansion 68-39210 to -6 power per °F (68 – 392°F) 9.6
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) 9.8
Specific Heat CapacityBtu/ lb /°F at 68°F 0.092
Modulus of Elasticity in Tensionksi 17000
Modulus of Rigidityksi 6400
Fabrication Properties
Technique Suitability
Soldering Excellent
Brazing Excellent
Oxyacetylene Welding Fair
Gas Shielded Arc Welding Good
Coated Metal Arc Welding Not Recommended
Spot Weld Not Recommended
Seam Weld Not Recommended
Butt Weld Good
Capacity for Being Cold Worked Excellent
Capacity for Being Hot Formed Excellent
Forgeability Rating 65
Machinability Rating 20
Common Fabrication Processes
  • Blanking
  • Coining
  • Coppersmithing
  • Drawing
  • Etching
  • Forming and Bending
  • Heading and Upsetting
  • Hot Forging and Pressing
  • Piercing and Punching
  • Roll Threading and Knurling
  • Shearing
  • Spinning
  • Squeezing and Swaging
  • Stamping
Thermal Properties
Treatment Minimum* Maximum*
* Temperature is measured in Fahrenheit.
Annealing 700 1200
Hot Working Temperature 1400 1600
Typical uses
Product Category Product Reason Category Reason
Electrical Bus Conductors Conductivity (Electrical) Electrical Conductivity
Bus Conductors Conductivity (Thermal) Thermal Conductivity
Busbars Brazing Characteristics Will not Hydrogen Embrittle during Brazing
Busbars Conductivity (Electrical) Electrical Conductivity
Busbars Conductivity (Thermal) Thermal Conductivity
Busbars Welding Characteristics Will not Hydrogen Embrittle during Welding
Coaxial Cables Brazing Characteristics Will not Hydrogen Embrittle during Brazing
Coaxial Cables Conductivity (Electrical) Electrical Conductivity
Coaxial Cables Welding Characteristics Will not Hydrogen Embrittle during Welding
Copper to Glass Seals in Electronic Appliances Conductivity (Electrical) Electrical Conductivity
Copper to Glass Seals in Electronic Appliances Conductivity (Thermal) Thermal Conductivity
Copper to Glass Seals in Electronic Appliances Mechanical Properties Ductility
Electrical Conductors Brazing Characteristics Will not Hydrogen Embrittle during Brazing
Electrical Conductors Conductivity (Electrical) Electrical Conductivity
Electrical Conductors Conductivity (Thermal) Thermal Conductivity
Electrical Conductors Corrosion Resistance Corrosion Resistance
Electrical Conductors Welding Characteristics Will not Hydrogen Embrittle during Welding
Klystrons Conductivity (Electrical) Electrical Conductivity
Klystrons Conductivity (Thermal) Thermal Conductivity
Lead In Wire Conductivity (Electrical) Electrical Conductivity
Lead In Wire Conductivity (Thermal) Thermal Conductivity
Lead In Wire Corrosion Resistance Corrosion Resistance
Microwave Tubes Conductivity (Electrical) Electrical Conductivity
Microwave Tubes Conductivity (Thermal) Thermal Conductivity
Transistor Components Conductivity (Electrical) Electrical Conductivity
Transistor Components Conductivity (Thermal) Thermal Conductivity
Wave Guides Conductivity (Electrical) Electrical Conductivity
Wave Guides Conductivity (Thermal) Thermal Conductivity
Industrial Billet Mold Tube Composition Low Oxygen Content
Billet Mold Tube Conductivity (Electrical) Electrical Conductivity
Billet Mold Tube Conductivity (Thermal) Thermal Conductivity
Billet Mold Tube Corrosion Resistance Corrosion Resistance
Coaxial Tube Brazing Characteristics Will not Hydrogen Embrittle during Brazing
Coaxial Tube Conductivity (Electrical) Electrical Conductivity
Coaxial Tube Welding Characteristics Will not Hydrogen Embrittle during Welding
Extrusion Cans for Powder Metallurgy Composition Low Oxygen Content
Extrusion Cans for Powder Metallurgy Conductivity (Thermal) Thermal Conductivity
Extrusion Cans for Powder Metallurgy Forming Characteristics Lubricity on Dies
Extrusion Cans for Powder Metallurgy Welding Characteristics Weldability
Tubing, LP Gas Service
Tubing, Medical Gas- Oxygen
Vacuum Seals Forming Characteristics Formability
Vacuum Seals Pressure Tight Pressure Tight
Other Tubular Composition Low Oxygen Content
Tubular Conductivity (Electrical) Electrical Conductivity
Tubular Conductivity (Thermal) Thermal Conductivity
Tubular Corrosion Resistance Corrosion Resistance
Applicable Specifications
Form Specific Sub-Form Application System Standard Description
ASTM B577 Detection of Cuperous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
ASTM B224 Standard Classification of Coppers
Bands Projectile Rotating MILITARY MIL-B-18907 BANDS, PROJECTILE ROTATING
Projectile Rotating MILITARY MIL-B-20292 BLANKS, ROTATING BAND, FOR PROJECTILES
Bar SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Bus Bar SAE J463 WROUGHT COPPER AND COPPER ALLOYS
SAE J461 WROUGHT AND CAST COPPER ALLOYS
ASTM B152/B152M COPPER SHEET, STRIP, PLATE AND ROLLED BAR
Bus Bar SAE J461 WROUGHT AND CAST COPPER ALLOYS
Bus Bar ASTM B187/B187M COPPER BUS BAR, ROD AND SHAPES AND GENERAL PURPOSE ROD, BAR AND SHAPES
AMS 4602 COPPER BARS, RODS, AND SHAPES, HARD TEMPER
Brazing Filler Metal FEDERAL QQ-B-650 BRAZING ALLOY, COPPER, COPPER-ZINC, AND COPPER-PHOSPHORUS
Bus Bar, Rod and Shapes, General Purpose, same ASME SB187 COPPER BUS BAR, ROD AND SHAPES AND GENERAL PURPOSE ROD, BAR AND SHAPES
Fitting ASME B16.22 WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS
Foil Printed Circuits ASTM B451 COPPER FOIL, STRIP AND SHEET FOR PRINTED CIRCUITS AND CARRIER TAPES
Nipples ASTM B687 BRASS, COPPER AND CHROMIUM PLATED PIPE NIPPLES
Pipe Seamless ASME SB42 SEAMLESS COPPER PIPE, STANDARD SIZES
ASTM B698 COPPER, COPPER ALLOY PLUMBING PIPE AND TUBE
Bus Bar ASTM B188 SEAMLESS COPPER BUS PIPE AND TUBE
ASTM B42 SEAMLESS COPPER PIPE, STANDARD SIZES
Plate SAE J463 WROUGHT COPPER AND COPPER ALLOYS
SAE J461 WROUGHT AND CAST COPPER ALLOYS
AMS 4501 COPPER SHEET, STRIP AND PLATE, LIGHT COLD ROLLED
ASTM B432 COPPER AND COPPER ALLOY CLAD STEEL PLATE
ASTM B152/B152M COPPER SHEET, STRIP, PLATE AND ROLLED BAR
Refinery Shapes ASTM B170 OXYGEN-FREE ELECTROLYTIC COPPER-REFINERY SHAPES
Rod SAE J461 WROUGHT AND CAST COPPER ALLOYS
Bus Bar ASTM B187/B187M COPPER BUS BAR, ROD AND SHAPES AND GENERAL PURPOSE ROD, BAR AND SHAPES
AMS 4602 COPPER BARS, RODS, AND SHAPES, HARD TEMPER
ASTM B49 HOT-ROLLED COPPER ROD REDRAW FOR ELECTRICAL PURPOSES
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Seamless Condenser Tube & Ferrule Stock Condenser Tube ASME SB111 COPPER AND COPPER ALLOY SEAMLESS CONDENSER TUBES & FERRULE STOCK
Shapes Bus Bar ASTM B187/B187M COPPER BUS BAR, ROD AND SHAPES AND GENERAL PURPOSE ROD, BAR AND SHAPES
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
AMS 4602 COPPER BARS, RODS, AND SHAPES, HARD TEMPER
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Sheet AMS 4501 COPPER SHEET, STRIP AND PLATE, LIGHT COLD ROLLED
Printed Circuits ASTM B451 COPPER FOIL, STRIP AND SHEET FOR PRINTED CIRCUITS AND CARRIER TAPES
ASTM B152/B152M COPPER SHEET, STRIP, PLATE AND ROLLED BAR
SAE J461 WROUGHT AND CAST COPPER ALLOYS
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
ASTM B506 COPPER CLAD STAINLESS STEEL SHEET AND STRIP FOR BUILDING CONSTRUCTION
Sheet, Strip, Roller Bar & Plate ASME SB152 COPPER SHEET, STRIP, PLATE, AND ROLLED BAR
Strip SAE J463 WROUGHT COPPER AND COPPER ALLOYS
AMS 4501 COPPER SHEET, STRIP AND PLATE, LIGHT COLD ROLLED
ASTM B506 COPPER CLAD STAINLESS STEEL SHEET AND STRIP FOR BUILDING CONSTRUCTION
ASTM B152/B152M COPPER SHEET, STRIP, PLATE AND ROLLED BAR
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Printed Circuits ASTM B451 COPPER FOIL, STRIP AND SHEET FOR PRINTED CIRCUITS AND CARRIER TAPES
Tube ASTM B698 COPPER, COPPER ALLOY PLUMBING PIPE AND TUBE
For Air Conditioning And Refrigeration Field Servi SAE J461 WROUGHT AND CAST COPPER ALLOYS
MILITARY MIL-T-24107 TUBE, COPPER, SEAMLESS
ASTM B75/B75M SEAMLESS COPPER TUBE
ASTM B716 WELDED COPPER WATER TUBE
MILITARY MIL-T-24107 TUBE, COPPER, SEAMLESS
ASTM B640 WELDED COPPER AND COPPER ALLOY TUBE FOR AIR CONDITIONING AND REFRIGERATION SERVICE
ASTM B395/B395M U-BEND SEAMLESS COPPER AND COPPER ALLOY HEAT EXCHANGER AND CONDENSER TUBES
ASTM B280 SEAMLESS COPPER TUBE FOR AIR CONDITIONING AND REFRIGERATION FIELD SERVICE
ASME SB75 SEAMLESS COPPER TUBE
ASME SB395 U-BEND SEAMLESS COPPER & COPPER ALLOY HEAT EXCHANGER & CONDENSER TUBE
ASTM B359/B359M COPPER AND COPPER-ALLOY SEAMLESS CONDENSER AND HEAT EXCHANGER TUBES WITH INTEGRAL FINS
ASME SB359 COPPER & COPPER ALLOY SEAMLESS CONDENSER & HEAT EXCHANGER TUBES WITH INTEGRAL FINS
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Bus Bar ASTM B188 SEAMLESS COPPER BUS PIPE AND TUBE
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Bright Annealed ASTM B68/B68M SEAMLESS COPPER TUBE, BRIGHT ANNEALED
MILITARY MIL-T-3235 TUBE, COPPER, SEAMLESS (FOR TORPEDO USE)
For Air Conditioning And Refrigeration Field Servi SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Condenser Tube ASTM B111/B111M COPPER AND COPPER ALLOY SEAMLESS CONDENSER TUBES AND FERRULE STOCK
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Rectangular Waveguide ASTM B372 SEAMLESS COPPER AND COPPER-ALLOY RECTANGULAR WAVEGUIDE TUBE
ASTM B641 SEAMLESS AND WELDED COPPER DISTRIBUTION TUBE (TYPE D)
ASTM B743 SEAMLESS COPPER TUBE IN COILS
ASTM B447 WELDED COPPER TUBE
ASTM B641 SEAMLESS AND WELDED COPPER DISTRIBUTION TUBE (TYPE D)
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Rectangular Waveguide MILITARY MIL-W-85 WAVEGUIDES, RIGID, RECTANGULAR
Tube, water ASTM B88 SEAMLESS COPPER WATER TUBE
ASTM B88M SEAMLESS COPPER WATER TUBE (METRIC)
Wire ASTM B172 ROPE-LAY-STANDARD CONDUCTORS WITH BUNCH STRANDED MEMBERS
ASTM B174 BUNCH-STRANDED CONDUCTORS
ASTM B355 NICKEL-COATED SOFT OR ANNEALED COPPER WIRE
ASTM B33 TINNED SOFT OR ANNEALED COPPER WIRE FOR ELECTRICAL PURPOSES
ASTM B298 SILVER-COATED SOFT OR ANNEALED COPPER WIRE
Hard Drawn FEDERAL QQ-W-343 WIRE, ELECTRICAL (UNINSULATED)
Hard Drawn ASTM B2 MEDIUM-HARD DRAWN COPPER WIRE
Hard Drawn FEDERAL QQ-W-343 WIRE, ELECTRICAL (UNINSULATED)
ASTM B8 CONCENTRIC-LAY-STRANDED COPPER CONDUCTORS, HARD, MEDIUM-HARD OR SOFT
ASTM B189 LEAD-COATED AND LEAD ALLOY COATED SOFT COPPER WIRE FOR ELECTRICAL PURPOSES
ASTM B496 COMPACT ROUND CONCENTRIC-LAY-STRANDED COPPER CONDUCTORS
Hard Drawn ASTM B1 HARD-DRAWN COPPER WIRE
ASTM B226 CORED, ANNULAR, CONCENTRIC-LAY-STRANDED COPPER CONDUCTORS
Soft ASTM B738 FINE-WIRE BUNCH-STRANDED AND ROPE-LAY BUNCH STRANDED COPPER CONDUCTORS FOR USE AS ELECTRICAL CONDUCT
ASTM B470 BONDED COPPER CONDUCTORS FOR USE IN HOOKUP WIRE FOR ELECTRONIC EQUIPMENT
Soft ASTM F9 ROUND WIRE FOR USE AS GRID SIDE RODS IN ELECTRON TUBES
ASTM B286 COPPER CONDUCTORS FOR HOOKUP WIRE IN ELECTRONIC EQUIPMENT
Soft ASTM B48 SOFT RECTANGULAR AND SQUARE BARE COPPER WIRE FOR ELECTRICAL CONDUCTORS
Soft ASTM B3 SOFT OR ANNEALED COPPER WIRE
Soft AMS 4701 COPPER WIRE, ANNEALED
FEDERAL QQ-B-575 BRAID, WIRE (COPPER, TIN-COATED OR SILVER-COATED, TUBULAR OR FLAT)
Soft FEDERAL QQ-W-343 WIRE, ELECTRICAL (UNINSULATED)
ASTM B246 TINNED HARD-DRAWN AND MEDIUM HARD-DRAWN COPPER WIRE FOR ELECTRICAL PURPOSES
ASTM B173 ROPE-LAY-STRANDED CONDUCTORS WITH CONCENTRIC STRANDED MEMBERS
MILITARY MIL-W-6712 WIRE, METALLIZING
ASTM B272 COPPER FLAT PRODUCTS WITH FINISHED (ROLLED OR DRAWN) EDGES (FLAT WIRE AND STRIP)
Corrosion Properties

No Corrosion Properties Available.

Từ khóa » C11000 Vs C10200